Does Dexstar Solid Center Steel Wheel Have 4 x 101.6mm Bolt Pattern
Updated 10/30/2025 | Published 02/15/2025
Question:
Does the Dexstar Solid Center Steel Wheel - 13inch x 4-1/2inch Rim - 4 on 4 - White Powder Coat Part Number: AM20202 equate to 101.6mm as the lug pattern? If not, what is the mm number for the lug pattern?
asked by: David K
0
Expert Reply:
Hey David! The Dexstar Solid Center Steel Wheel # AM20202 does have a 4 x 101.6mm bolt pattern. This is the same as the 4 on 4. If you have any other questions feel free to reach out in the comments below.
expert reply by:
Robin H
0
Dexstar Solid Center Steel Wheel On Trailer
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Dexstar Solid Center Steel Wheel - 13" x 4-1/2" Rim - 4 on 4 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 13 Inch
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will a Hub Cap Work With Dexstar Solid Center Steel Wheel and Can It Be Painted
- Q&A: Solution for Needing Grease Cap for Hub Bore of 2.047
- Q&A: Replacement Options for a 13 Inch Rim with a 2.5 Inch Diameter Pilot Hole
- Q&A: Replacement Wheels, Tires, and Bolts for a 4 on 9.44 Dexstar Vintage Steel Wheel
- Q&A: Recommended Wheel for a 1976 Rolco Tandem Boat Trailer with ST175/80D-13 Tires
- Q&A: How to Determine if Wheel Trailer Setup is Hub-Centric or Lug-Centric
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
Robin H.
10/30/2025
Hey David, did the 4 x 101.6mm bolt pattern on the Dexstar wheel end up matching what you needed? Knowing how it fit could help others checking their lug spacing too.