Shock absorbers ensure these straps stay tight around your motorcycle, UTV, or other cargo so that even toys with bouncing suspensions stay put. No need to pull over and re-tighten. Zinc-coated double J-hooks resists rust. 6,000-lb Max load.
Features:
Specs:
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
These one-of-a-kind ratchet straps from ShockStrap are great for nearly any application, from securing your cargo for your next weekend getaway, to strapping down your favorite toys on your trailer. The 9' length of the straps is perfect for securing farm equipment, like cattle panels and water tanks, or for tying down a motorcycle or UTV in your truck bed or trailer.
Unlike traditional straps, which don't stretch or contract, these tie-downs are uniquely designed with built-in shock absorbers that allow the straps to maintain constant tension on your load as you travel. This is great for bikes and UTVs, which have suspension systems that can compress and rebound when you travel rough terrain.
The webbing of standard straps can't stretch or contract to absorb impacts. As a result, standard tie-downs might become detached from their anchor points, or they may become slack around your gear as the load shifts.
But these ratchet straps each feature 2 built-in urethane shocks that are designed to absorb impact and to allow give. This ensures that the tie-downs stay taut and won't loosen over time. The built-in shocks help to keep the tie-downs from coming loose or failing, which could result in lost or damaged gear.
In addition, the shocks ensure a longer life for the strap webbing. If you use these to tie down a UTV, for example, the constant compressing and rebounding of the UTV's suspension during travel can wreak havoc on ordinary straps. The webbing is likely to experience more wear and tear as it rubs along your gear. But the ShockStrap's shocks absorb these jolts so that the webbing of the tie-downs stays put instead of wearing over the edges of your equipment.
Each tie-down features a commercial-grade, field-replaceable ratchet that is easy to use. To release the ratchet, grab the oversized handle and pull on the release lever. The release lever is positioned on the outside of the ratchet to ensure safe and easy operation, even if you're wearing gloves.
To use the ShockStrap ratcheting tie-down strap, first attach one of the sturdy double J-hooks to a desired anchor point. Then stretch the strap over your cargo and secure the other hook to a point on the opposite side of your truck or trailer. Each hook has a wide opening, making it hassle-free to maneuver and attach the hooks to your anchor points.
Soft loops, which are on both sides of the strap, can be used to tie down a piece of equipment that may otherwise be difficult to secure. So instead of using the hooks, which may scratch or scuff your toys and might be difficult to run through or around other cargo, you can easily cinch each tie-down around your gear. Just wrap a soft tie around the axle of your UTV or around the handlebars of your motorcycle, and then secure the tie-down to your anchor points as usual.
Once the hooks are in place, tighten the webbing around the cargo and activate the shocks. To tighten the strap, crank the ratchet mechanism until the webbing is taut around your load. Be sure not to overtighten the strap. If your hand cannot fit between the shocks and the safety strap, the strap is too tight.
To activate the shocks, tighten the strap a bit more, stretching the shocks until light is visible through the bolt holes in each shock. In warm climates, the shocks can stretch up to 2", while in subzero climates you may only get about 1/2" of give.
Finally, after tightening the webbing and stretching the shocks, make sure your cargo is completely secure and then tie off any extra slack.
Additional ShockStrap accessories can be added to help with load securement. Use the ShockStrap strap latches (297-2STY - sold separately) to secure the hooks on these tie-down straps to anchor points, ensuring that the hooks won't pop off while you are securing your load or while you are traveling.
The sturdy, UV-resistant polyester webbing of these tie-down straps has a high tolerance for abrasion and water absorption.
The shocks are made of urethane, which can withstand elements such as sunlight, saltwater, moisture, oil, fungi, and most chemicals. These shocks can function in nearly any temperature, holding up to hot and cold weather conditions without losing elasticity or becoming unyielding or brittle over time.
The rust-resistant, yellow zinc chromate coating on the ratchet and hardware holds up to the varying weather conditions.
A safety strap is also built into each tie-down to provide peace of mind should something happen to the shocks. This safety strap ensures that if the tie-down is used improperly, overloaded, or unduly stretched, your cargo will remain secured.
Do you have a question about this Ratchet Strap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.