Kenda Trailer Tires and Wheels - AM3S650

Bias tire has a ply rating of 6 and a 1,820-lb maximum load at 50 psi. The 15" diameter x 6" wide steel trailer wheel has a 5 on 4-1/2 bolt pattern and a corrosion-resistant galvanized finish.

Features:

• Tire-and-wheel assembly is ideal for boat trailers, stock trailers, utility trailers, and campers
• Sturdy steel wheel with 8-spoke design
  • Galvanized to resist corrosion
• Loadstar bias ply tire
  • Flatter tread provides improved stability for excellent handling
  • Advanced rubber compound offers longer tread wear as well as low rolling resistance for a smooth ride
• Special trailer tire design
  • Couples the strength of a bias tire with the durability and stability of a radial tire
  • Created specifically for trailers and not intended for use on other vehicles
• Assembly meets DOT specifications

Specs:

• Rim dimensions: 15" diameter x 6" wide
• Bolt pattern: 5 on 4-1/2"
• Wheel bolt size: 1/2"-20
• Wheel capacity: 2,050 lbs
• Pilot diameter: 3.19"
• Offset: 0
• Tire size: ST205/75D15
  • Section width: 7.7"
  • Outer diameter: 27.4"
• Tire capacity:
  • Load range: C
  • Ply rating: 6
  • Maximum load: 1,820 lbs at 50 psi
• Maximum speed: 81 mph (speed rating M)
• Warranty:
  • 5-Year on tire
  • Limited 2-year on wheel

1-Year Worry-Free Guarantee

This tire has a 1-year worry-free guarantee. If within the first 12 months the tire is damaged in any way, it will be replaced at no charge.

Bias Tires vs. Radial Tires

Bias ply tires are designed for off-road or agricultural applications. They are built with thick, durable nylon cords that are positioned at a 30- to 45-degree angle to the direction of travel. The layers alternate in a crisscross pattern, making the sidewalls stiffer so that the entire tire is able to flex easily. As a result, the tire provides a smooth ride and improved handling when trailering on uneven surfaces.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

• If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
• If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
• If D = 3", then the bolt pattern is 5 on 5"
• If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

3S650 Loadstar ST205/75D15 Bias Tire with Galvanized Steel 8-Spoke Rim - Load Range C