See what our Experts say about this TruRyde Trailer Suspension Parts

• Replacement Leaf Spring Bushings for 1-3/4 inch Springs and 2 Inch Hangers
  With those dimensions, we have the Nylon Bushing - 1/2" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long # TRBU11508. These will work as replacements for your springs, but they will not give you that outer flange. You would need to use flat washers to give you proper spacing since your hangers are 2 inches wide. The 2 inch wide leaf springs are normally the slipper style springs instead of the double eye springs like what you have. We don't have bushings that are stepped like what...
  view full answer...
  
• Availability of Nylon Trailer Leaf Spring Bushings
  We do offer nylon bushings for trailer leaf springs as separate replacement parts. For example, we have part # SP05-080 from Redline, which is a set of four (4) two-piece nylon bushings. These measure 9/16-inch inner diameter, 1-5/16-inch outer diameter and 2-inches in length. Other sizes are also offered and these are linked below. # TRBU12566 # SP05-060 # TRBU11508 # TRBU11561 # TRBU11566 # TRBU11568 # 721590 # TRBU13871 # TRBU11506
  view full answer...
• Does Trailer Suspension Equalizer TREQ1304 Require Bushings
  The large center hole on equalizer # TREQ1304 should be 7/8 inches in diameter. I checked your order and the equalizer bushings you bought were # TRBU13871. These have a 7/8 inch INNER diameter but the outer diameter is 1-1/8 inches which is why they will not fit. You can use bushings that have an outer diameter of 7/8 inches. We have # TRBU11568 but it is 1-3/4 inches long which is 1/4 inch shorter than the width of the equalizer. It has an inner diameter of 9/16 inches. We also have...
  view full answer...
• Replacement Nylon Bushings for Stratos Tandem Axle Boat Trailer
  You will want to select replacement bushings for your tandem-axle trailer suspension to match the originals so it is best to remove a spring and bushing. In the 1/2-inch inside diameter measurement you took we offer two nylon bushings. TruRyde # TRBU11506 has a 1/2-inch inside diameter and an 11/16-inch outside diameter. It is 1-3/4-inches long to match the width of your leaf springs. TruRyde # TRBU11508 also has a 1/2-inch inside diameter and a 7/8-inch outside diameter. It is also 1-3/4-inches...
  view full answer...
• Measured Dimensions of TruRyde Nylon Bushing TRBU11508
  I pulled a sample of the TruRyde Nylon Bushing # TRBU11508 so that I could take measurements with a precision caliper. In some cases a parts actual dimensions may vary slightly from its description. Keep in mind that its fit depends in part on the eye of the particular leaf spring; one that is worn a bit will most likely be a slip fit, while a brand new spring might need some pressure to install the bushing. The specs for this item indicate an inside diameter of 1/2-inch, an outside diameter...
  view full answer...
• Does Equalizer for 2" Wide Slipper Springs # TREQ1304 Come with Bushing
  You will want a center bushing for the center hole of the hanger part # TREQ1304 that you referenced. We have # TRBU11508 which has a 7/8 inch outer diameter and 1-3/4 inches long but with a 1/2 inch inner diameter. The bolt on the slipper side does not need a bushing but the side that is designed for a spring eye does need a bushing. Most likely the spring has a bushing.
  view full answer...
• Replacement Shackle Straps and Bushings for Trailer Suspension
  Shackle straps for leaf spring suspensions are usually measured from the two hole centers. For example, part # 18-11GALV is 2-1/4-inches long measured from hole center to hole center; the holes themselves are 9/16-inch diameter; and the overall length and width of the item are 3-1/2- and 1-1/4-inches respectively. All shackle straps are linked for you. For a nylon bushing with dimensions close to your requirement we have part # TRBU11508 which is 1/2-inch inner diameter, 7/8-inch outer...
  view full answer...
• Can Rubber Bushing of Leaf Spring be Replaced with # TRBU11508
  You can change the leaf spring bushing material if you want to. If the dimensions of what you need match the # TRBU11508 that you referenced this would work well. The dimensions of this are 1/2" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long.
  view full answer...
• Recommended Replacement Front Bushing, Rear Bushing, And Ubolts For Trailer
  We have the parts you are looking for! 4" long x 2 1/8" wide x 7/16" thread Ubolts # CE15251A. The 2 1/8" is measured from inside to inside so these will be right at 2 1/4" outside to outside. 9/16" I.D. x 7/8" O.D. 1 3/4" long Front Bushing # TRBU11568 we do not have a bushing with 5/8" inner diameter, 9/16 is the closest and will work fine as it is 1/16" smaller. 1/2" I.D. x 7/8" O.D. 1 3/4" long Rear Bushing # TRBU11508.
  view full answer...
• Availability of 1/2 inch Inner Diameter Bushing for Trailer Leaf Spring
  We have two bushings available that have 1/2 inch inner diameters. The part # TRBU11506 which is 11/16 inches in outer diameter and # TRBU11508 which has a 7/8 inch outer diameter. We don't modify any parts before we sell them.
  view full answer...
• Nylon Bushing Recommendation that is 1/2 inch Diameter and 11/16 inch Outer Diameter
  The closest bushing we offer to the dimensions you are looking for is the part # TRBU11506. This bushing has an inner diameter of 1/2 inch, an outer diameter of 11/16 inch, and a length of 1-3/4 inches. This bushing could easily be trimmed down to length though since it is nylon.
  view full answer...

Do you have a question about this Trailer Suspension Part?