Replacement Leaf Spring Bushings for 1-3/4 inch Springs and 2 Inch Hangers
Updated 04/16/2018 | Published 04/13/2018 >
Products Featured in This Question
Question:
Im trying source new bushings for an old 1979 Jon boat trailer. Ive attached a pic of the old bushing. It is a two piece bushing that has a flange on it that increase the overall thickness of the connection point. The O.D. is 7/8 and I.D. /2. The problem is the total thickness of the connection point to the trailer is 2 inch and leaf spring is only 1/3/4. These bushings have a outer flange that sticks out another 1/4 inch to make up the gap. Do you have these types of bushings or is there an alternative to this style of bushing I could possibly use? Thanks
asked by: Travis M
Expert Reply:
With those dimensions, we have the Nylon Bushing - 1/2" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long # TRBU11508. These will work as replacements for your springs, but they will not give you that outer flange. You would need to use flat washers to give you proper spacing since your hangers are 2 inches wide.
The 2 inch wide leaf springs are normally the slipper style springs instead of the double eye springs like what you have. We don't have bushings that are stepped like what you have. We have 2 inch bushings but they have a different inner and outer diameter. Most springs use a 9/16 inner diameter and an 11/16 outer diameter in which case you would be able to use # TRBU12566.
Product Page this Question was Asked From
Nylon Bushing - 1/2" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long
- Trailer Suspension Parts
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 1/2 Inch ID x 7/8 Inch OD
- 1-3/4 Inch Long
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: spring bushing
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 2" Long
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: Terran Industries Tandem-Axle Hanger Kit for Slipper Springs 3-3/4" Tall Front
- Shop: Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Shop: Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Shop: U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts
- Video: All About the Nylon Bushing
- Q&A: Is 14 Gauge Wire Too Small for Electric Trailer Brakes
- Search Results: leaf spring bushing
- Search Results: bushing
- Q&A: Are the Never Fail Bushings or Bronze Bushings Offered for 2 Inch Wide Leaf Springs
- Q&A: Closest Metric Replacement Tire Size for 7.00-15 Tire on Livestock Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Brake Controller
- Article: How to Accurately Measure Trailer Leaf Springs



