Plate uses 1/2" diameter U-bolts to attach your square, 1-1/2" wide trailer axle to your 1-3/4" wide leaf springs.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we will be reviewing part number 115983. This is Redline's ubolt plate from 1 1/2" squared trailer axles with 1 3/4" wide springs. This is used with ubolts to secure the axle to the lead springs which are mounted to the trailer frame. It's going to attach with 2 1/2" diameter square ubolts. They are going to be sold separately. The 1/2" diameter is important because you want to make sure that the ubolt goes through the 1/2" diameter hole.
The 4 holes along the corners are going to be the same in diameter so you will need to get some ubolts. I'm going to recommend part number Sp01-120. Those ubolts are going to come with the nuts to secure them on the other side and it's going to fit this mounting plate perfectly. This does fit square trailer axles that are 1 1/2" wide. It will work with 1 3/4" wide lead springs.The overall dimensions of the mounting plate is going to give us a measurement of 5 1/4" x 3 1/2". That's going to do it for today's review of part number 115983.
This is Redline's ubolt plate from 1 1/2" squared trailer axles with 1 3/4" wide springs. .
Great Service
Quick service. Quality merchandise.
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.