Spring Release Hinge and Latch w/ Holdback - 2 Holes - 1/4" - Stainless Steel - Left

Video Transcript for Review of Paneloc Trailer Door Latch - Left Stainless Steel Spring Release Hinge And Latch - PA77VR

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look at this Left Stainless Steel Spring Release Hinge and Latch with Holdback. Now, this is a combination hinge and latch that's gonna be perfect for your storage cabinets and trailer compartments. This is designed to stay open when you pull the pin back, and the latch has a left hand configuration and it does have a holdback. So as you can see, just like that.

And then, little spring back just like that. You do have these two mounting holes as you can see. Hardware is not included, so you would have to supply that on your own. This is corrosion resistant. This is passivated stainless steel.

So, let me see if I can show you some measurements just so you can be confident this is going to be exactly what you need. So, looking at the overall length of the bracket, as you can see we're sitting right at 1 3/4 inches long. And the width right at about an inch it looks like. And then, the distance between the mounting holes, sometimes that can be tricky to show on camera, but I hope you can see pretty close to 1 1/4 inches on center. And then, the latch pin dimensions.

Looks like we're right at 2 1/4 inches long. The diameter is a quarter of an inch. And then the pin extension is a half an inch long. So, hopefully those measurements we inchesre understandable and helpful to you. But I think that's gonna wrap up our real quick look today.

I do hope that our brief time together was helpful for you. Again, my name is Andy. Thank you for joining me.