MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches

See what our Experts say about this MORryde Accessories and Parts

• Can The MORryde Storage Bracket For WDH Stay On The Trailer's A-Frame While Driving?
  That’s one of the big advantages of the MORryde WDH Storage Bracket # MR62ZV - you can leave it mounted while you’re on the road. It bolts permanently to the A-frame and won’t interfere with your hitch. Just remove the bars and shank and install on the hitch receiver when you’re ready to hit the road. No drilling is required. In some rare instances, some travelers may prefer a more temporary storage solution like the # MR72ZV. This doesn't require drilling holes into the trailer's frame...
  view full answer...
• How Do I Know Which MORryde WDH Storage Bracket To Use On Jayco Keystone Camper ?
  Hey Phil, you’ll need about 10 inches of unobstructed space on one side of your trailer's A-frame to bolt on the MORryde EzStor - Storage Bracket for WDH # MR62ZV. Then it does protrude inwards the length of your trunnion bars, so that's something to keep in mind (see attached photo). It usually clears battery trays, but if your wiring or support brackets are in that zone, send us a photo and we can help you double-check. If you don't think you have the room, you'll instead want to look...
  view full answer...
• Can MORryde EzStor Storage Bracket For Weight Distribution Hitches Be Locked To Prevent Theft?
  It adds some peace of mind, yes. The open cradle design of the MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches # MR62ZV doesn’t lock the bars, but it does make them a lot harder to casually remove since you have to lift them out vertically. For added security, consider a small cable lock looped through the handle slots, or a pin lock like etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881. This way your expensive WDH won't be sitting there for anyone...
  view full answer...
• How To Know If You Have Clearance On Trailer's A Frame For MORryde WDH Storage Brackets
  From the top of your frame to the highest point of the bracket, you’re looking at just under 5-1/2 inches. That usually clears LP tank covers, but if yours flares out low, you might need to offset it rearward slightly. The full dimensions of the MORryde EzStor - Bolt-On Storage Bracket for WDH # MR62ZV are -6-3/8" tall -22-1/4" wide -17-1/2" deep As long as you have room for this, and also a little bit more room on the inside to clear the trunnion bars as seen in the attached pics, you'll...
  view full answer...
• Does MORryde WDH Storage Bracket Come With Hardware And Brackets?
  Yes Kurt, all hardware is included with the MORryde Storage Bracket for WDH # MR62ZV, no hunting at the hardware store. You’ll get carriage bolts, washers, and lock nuts sized for a standard trailer A frame. If your frame is thicker or taller than usual, let me know so we can figure out which holes you need to use on the bracket; but you should be able to just select the closest size that fits. What type of trailer and vehicle do you have?
  view full answer...
• Can I Leave MORryde WDH Storage Bracket On Trailer While Towing?
  Nathan, you technically can, but I’d advise against it. Since the MORryde EzStor Lite - Removable Storage Bracket for Weight Distribution Hitches # MR72ZV is not bolted through the frame, the vibrations from driving can loosen it over time. Most folks just pop it off and store it in the front compartment or under a bunk when traveling. If you'd like a more permanent bolt-on option, I'd instead go with the MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches # MR62ZV. What...
  view full answer...
• Where To Store Equalizer WDH On Grand Design Imagine When Not Towing
  Absolutely, this MORryde storage bracket # MR62ZV is a solid match for Equal-i-zer bars. It bolts right to your trailers A-frame, and once it’s installed, the bars drop into the notched slots and stay secure during storage. Great solution for Grand Designs with limited pass-through storage. What do you normally do with your weight distribution hitch when not towing? Also those Imagines are very nice!
  view full answer...
• Can MORryde WDH Storage Rack Stay On Trailer's Frame While Towing?
  Shannon, I wouldn’t recommend that. This # MR72ZV bracket isn’t bolted through the frame, it’s just held in place by the weight of the bracket. A 1/2" set screw can be added if wanting a more secure fit. It works great for storing your spring bars and wdh shank while parked, but it can shift during travel. It’s best to remove it before you hit the road. If you want a more permanent solution, Id look at the MORryde EzStor - Bolt-On Storage Bracket for WDH # MR62ZV. This doesn't need to...
  view full answer...
• How To Store Weight Distribution Hitch When Not Using It On Tongue Of Trailer And Keep It Locked
  Hey Kris, the MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches # MR62ZV adds some peace of mind, yes. The open cradle design doesn’t lock the WDH shank or bars, but it does make them a lot harder to just walk up and grab, and they'll stay off the ground there. For added security, consider a small cable lock looped through the handle slots or a pin lock like etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881. This will keep the WDH shank locked to the...
  view full answer...
• Can I Install MORryde WDH Storage Bracket On Left Side Of Trailer A Frame?
  Absolutely. The MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches # MR62ZV is symmetrical, so you can install it on either the driver or passenger side depending on your layout. Just make sure your propane lines or wiring aren’t in the way before installing. I've attached a section of the instructions that should help show you the process. Basically you'll just find the spot you want it at, and set it all in place and install the 4 included bolts and nuts. You'll...
  view full answer...
• Will MORryde Storage Brackets Work With ProPride 3P On Jayco Eagle?
  Yes Julia, the MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches # MR62ZV will work with any weight distribution hitch, even the ProPride 3P. It also works with any A-Frame trailer, no matter the size, so you won't have worries there either. How does the ProPride 3P handle the Jayco Eagle? I've heard good things about that setup.
  view full answer...
• What Size Trailer Frame Height And Width Does MORryde EzStor WDH Storage MR62ZV Fit?
  Yes, Pat, it absolutely does! I went out to the warehouse and measured the MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches # MR62ZV for you. It can fit trailers up to nearly 7" wide, and trailer frames up to about 7-1/2" tall. This will cover basically any and all trailer A-frames that are out in the wild, so no worries there! What type of trailer are you using the WDH with?
  view full answer...

Do you have a question about this Accessories and Part?