How Do I Know Which MORryde WDH Storage Bracket To Use On Jayco Keystone Camper ?
Updated 08/05/2025 | Published 07/30/2025
Products Featured in This Question
Question:
What are the mounting requirements? My A-frame has battery boxes and LP trays. not sure if that would get in the way. It's on a Jayco Keystone camper.
asked by: Phil
Expert Reply:
Hey Phil, you’ll need about 10 inches of unobstructed space on one side of your trailer's A-frame to bolt on the MORryde EzStor - Storage Bracket for WDH # MR62ZV. Then it does protrude inwards the length of your trunnion bars, so that's something to keep in mind (see attached photo).
It usually clears battery trays, but if your wiring or support brackets are in that zone, send us a photo and we can help you double-check.
If you don't think you have the room, you'll instead want to look at the more temporary solution, the MORryde EzStor Lite - Removable Storage Bracket for WDH # MR72ZV. This doesn't get fastened to the trailer's frame; it basically sits in place while storing the hitch and trailer, then you remove the bracket from the frame when you start to tow the trailer again.
It allows the bars to sit parallel to the trailer's frame on the outside, rather than taking up space inside by the batteries and tanks. What do you think is best for you? I'm leaning towards the second option.
(click to enlarge)
Product Page this Question was Asked From
MORryde EzStor - Bolt-On Storage Bracket for Weight Distribution Hitches
- Accessories and Parts
- Weight Distribution Hitch
- Covers and Storage
- Brackets
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How to Power a Furrion Camera System w/ a 2024 Chevrolet Silverado 3500
- Q&A: Can The MORryde Storage Bracket For WDH Stay On The Trailer's A-Frame While Driving?
- Q&A: Troubleshooting Furrion Vision S+ Monitor Not Displaying Camera
- Q&A: How To Story Equalizer Hitch When Not Using It
- Q&A: Can MORryde WDH Storage Rack Stay On Trailer's Frame While Towing?
- Q&A: How Sturdy And Secure Is MORryde No-Drill WDH Storage Bracket For Trailer A-Frames?
- Q&A: Will MORryde Storage Bracket For WDH Work On Tapered A Frame Trailer?
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: How to Troubleshoot Your RV Air Conditioner
- Article: How to Measure for Trailer Hitch Drop
- Article: Stability Control for Heavy Duty Vehicles
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
Phil
8/5/2025
Good to know. If I go with the removable one, is there a case or anything to keep it from sliding around in storage?