If you want strong illumination without taking up much space, this TecNiq PCP2 marker light delivers clear, bright output from just two LEDs. Even though it’s only 2-1/2" long and 1" wide, the light meets both PC and P2 specifications for visibility. It runs efficiently between 9 and 14 volts DC, so you get reliable performance and bright red light wherever it’s mounted.
Moisture, grit, and vibration can ruin ordinary lights fast. This one is sealed tight with TecSeal urethane potting material that protects the circuit board from water and dust intrusion. It’s built for submersible use, so you don’t have to worry about weather or washdowns cutting its life short. Once installed, it stays clear and dependable through tough conditions.
Installing this light is simple and clean. It uses stud mounting with 2" hole spacing and has no visible fasteners once in place, giving it a smooth, finished look. The 6" pigtail uses a standard non-polarized connector, making wiring straightforward with no need to worry about which wire goes where.
TecNiq builds this light with durability in mind, from the UV-resistant lens to the sealed electronics inside. Every component is designed for long-term performance, and it’s covered by a lifetime warranty so you can count on it to keep working year after year.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steven here with etrailer.com. Today we're looking at our TecNiq PCP2 marker light. It's a self-grounded in red color. Now folks, this is powered by two LEDs. I do have it pre-wired today for you with a little demo box so you can see it lit up.
And it is UV resistant. Let's go ahead and turn off the overhead light so you can see it better in the dark. And it is dust and waterproof. Now this would be stud mounted with no visible fasteners and it does get grounded through the trailer frame. It does use and feature the TecSeal urethane potting material, so it's gonna guarantee circuit board protection.
And it's a standard non-polarized connector. Let's go ahead and turn on the overhead lights. And let's go ahead and power this down. So as you can see, it does come with a 6" long lead here. That's the positive wire.
Then again, your ground's gonna get grounded through the ground wire. As far as some quick dimensions, overall, about 2 1/2" long, center to center on the stud holes, 2" on center, and right at 1" wide. Now I do recommend picking up a grommet, sold separately, if you don't already have one. Oh, excuse me. And the grommet looks just like this.
It's item number TN43TR. And what you'll do is your center hole, the wire will go through, and then that grommet will get mounted under there, give you a nice flush, clean connection and help kind of hold everything in place and keep water and stuff off of that backing where it's getting grounded at. So again, sold separately, item number TN43TR. That's the grommet. Folks, that will wrap it up for our quick look together at this TecNiq PCP2 marker light. I'm Steven. Thanks for watching.
Ratings & Reviews
Good price fast service
Very bright, only need power wire and clean metal for the ground strap to ground to.
Exactly what I ordered and quality looks good
The self ground light was a quick and easy install on my cargo trailer. Nice and bright just like the photos.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.