Is this right for you? Product Expert Kathleen M says:
Throw this storage cover over your Class B camper van to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.
Features:
Specs:
You're worried about your Class B camper van getting wet and dirty in storage before your next camping trip. Whether you're storing your van in the rainy northwest, snowy north, or humid south, this weather-resistant cover is designed for use in extremely wet climates so your van will be protected. When you keep your van covered, you are less likely to need to wash and wax it in between trips. And if you want to trade your van in for a newer model later down the road, this cover will help maintain that resale value.
The 3-ply PolyPro top panel has moisture-wicking technology that vents condensation away to reduce moisture buildup that can damage your van over time. It also beads water when it rains to stop it from pooling or freezing, which eliminate the black streaks and corrosion you tend to see on the sides and roof of your van. And when the rain stops, the fabric dries quickly in mild sunlight to minimize the development of mold and mildew.
How to Measure Your Class B Camper Van
To determine if this cover will work for you, measure the overall length of your van from the front bumper to the rear bumper. Make sure you're accounting for any spare tire carriers and ladders on the back, but not the hitch. Then measure the overall height from the ground to the top of the van. Do not include any AC units, vents, or antennas in your height measurement, as the cover is already designed to accommodate them.
Securing the Cover onto Your Camper Van
First unroll the cover and carefully spread it evenly around your van, making sure you don't pull too hard and tear the fabric. Once the cover is in place, wrap the elasticized hem on the cover around the bottom corners of your van to remove any excess slack in the material. Adjust the tension panels on the front and rear of the cover until the cover fits snugly around the contours of your van. And then toss the weighted straps underneath your van to the other side and buckle them together, which keeps the cover secure and prevents it from flapping in the wind and damaging the paint job. The tension panels will help reduce the stress on the cover while you're tightening the straps.
And if you need to grab supplies, you can use the zippered panel on the passenger's side to easily access the interior of your van without having to completely remove the cover. You can also unzip the entire panel on the rear of the van so you can open the back doors and load and unload gear.
Average Customer Rating: 4.3 out of 5 stars (306 Customer Reviews)
Throw this storage cover over your Class B camper van to protect it from rain and snow while you're storing it in between camping trips. The cover secures with the integrated straps and adjustable tension panels so it won't flap in the wind.Sorry I can not give a review on my cover. We got 8" of snow the day before I received the cover, so it is in my living room as of now. The package was in good shape. The material feels heavy. Hopefully I will be able to do another review once Iget it out of bag and on my 1998 Chinook motorhome. Love the ideal that I will be able to get in the RV from the rear cuz my door is in the rear. We'll see. The rating will only be from the write up from etrailer and from as much as I can see it in the bag. Hoping it's good cover
Product was up beyond my expectation, it went on very quickly and fit like a glove, I hope it last as long as they say. I would recommend it to any one looking for an RV cover
Bill C - 09/16/2019
For a large cover it is fairly easy to use. Best to have a good ladder to reach the top of your vehicle.
Good product on time delivery at no cost (3 days)
Review from a similar PolyPro III in RV Covers
Its excellent... So far... I just put it on. It went on extremely easily and I did it alone. Instructions say two people, but I found it simple to do myself. I'm also OK with walking on my camper roof. I feels well made. Time will tell if it survives a New England winter.
Review from a similar PolyPro III in RV Covers
Great experience dealing with etrailer on getting a High quality cover that fits perfect over my tada travel trailer
Review from a similar PolyPro III in RV Covers
Little Guy Mini Max
I purchased this cover for a little guy mini max tear drop trailer. The cover is good quality and looks great. The cover covers the entire cabin as well as the utility box which houses the battery and propane. The fit is near perfect! The only problem is the cover door to access the RV is slightly off to the left. I can still access the RV without much trouble so all in all I am happy with it.
Review from a similar PolyPro III in RV Covers
Fits well on our Flagstaff Aframe popup including our front toy hauler rack. However the back corner developed small tears on the initial fitting. We have reinforced those corners. We like the heavier ceiling material & that it is white which will reflect heat/sun/ UV rays better. We also like the 4 vents hidden under a flap (2 on each side) - that should help reduce over heating and moisture build up plus reduce wind damage. Rather than use the rope they supplied as tie-downs, we have attached strapping & clips for the front, back & to the 3 side tie-down locations. The storage bag is nice to have, although it should be larger. We hope the cover will last 2-3 seasons
Judy B - 05/24/2021Review from a similar PolyPro III in RV Covers
This cover seems well constructed and fairly easy to put on the trailer. However, it wasn't folded to apply the way the instructions stated. As well, the instructions say to get on top of the trailer, which we aren't able to do. My suggestion is to change the instructions. It took two of us -- we spread out the cover, then on each side walked the cover back and over. Doing it that way wasn't too hard. Suggest putting pool noodle sections on the trailer parts that are pointy and stick out. Glad we got it!
Review from a similar PolyPro III in RV Covers
Great quality, easy to install, fits perfectly and provides all the protection we need in the rainy Pacific Northwest. It has a convenient feature that allows you to easily access the van’s interior if needed, to check heat levels, moisture, the control panel, whatever.
Wendy - 12/01/2022Review from a similar PolyPro III in RV Covers
I ordered a cover for our small rv and when the item was shipped for some reason it ended up back at etrailer, never getting delivered to us. etrailer reached out right away, let me know what happened, and asked if I wanted a refund or have the cover shipped again. I asked them to send it along and it arrived just a few days later. Great customer service and follow up. Thanks!
Review from a similar PolyPro III in RV Covers
Well worth the money. The Cover is withstanding winter conditions in the Northeast and providing great coverage.
Review from a similar PolyPro III in RV Covers
This fits the Prolite PlusS like it was made for it (the one that fits up to 16 feet) but you have to install it backwards from how it's meant to be installed on the Rpod. I just got it installed so I don't know about longevity yet. Thanks to others who tried it out on their PlusS and posted reviews.
Review from a similar PolyPro III in RV Covers
This is a very high quality cover. We are very happy with the fit and the way you can access the camper with the zipper placement. The tie downs are also very good.
Review from a similar PolyPro III in RV Covers
Just wanted to report that this item fits our 2017.5 Rpod 180 perfectly. Ours has the awning, A/C, and antenna. Installed it last night with a ladder and 2 people, it might be tough to do it without both. Quality appears very good and it was nice to note 2 small vents at the sides/top.
As usual, speedy shipping and great service from etrailer.
Review from a similar PolyPro III in RV Covers
We have been looking for quite sometime for a good cover for our Northern Lite 8’11” Queen Classic camper. We found the perfect cover. The quality is superior. Set up extremely easy. Love that it has the zippers and roll up in back to access inside camper. Would purchase this one again in a heartbeat. Customer service excellent. Was delivered in no time at all. Extremely pleased.
Review from a similar PolyPro III in RV Covers
Good cover but will deteriorate in 14 months max. UV has a big affect but the cover will provide protection until UV breaks it down. This makes my 3rd purchase of this cover and I may consider looking at another type for increased durability. Also if you have roof air on your popup, the cover's width is around 12" to narrow, which results in strain on the seams. Mix that with UV damage is does not take long to fail.
Review from a similar PolyPro III in RV Covers
The cover fits my trailer perfectly and looks great. It also feels durable, and they guarantee it for 3 years. I'm very happy and would definitely recommend this cover to others.
Review from a similar PolyPro III in RV Covers
Just finished putting the cover on our pop-up trailer and it fits perfectly. Looks great. We have put a lot of time into restoring our old camper-lots of memories in there-and wanted to be sure it stayed nice and dry thru the winter. We are very pleased with your product and how easy it was to install also. Would definitely recommend to anyone looking for a cover for their trailer. Hoping to see the inside of the camper is nice and dry in the spring.
Tom a - 10/20/2014Review from a similar PolyPro III in RV Covers
We were happy with this purchase, it was light weight for us to manage, it covered our pop-up nicely, we had some very heavy rain and wind and it kept the pop-up dry and the cover stayed secured. Very pleased.
Review from a similar PolyPro III in RV Covers
Travel trailer cover said it would fit a trailer 13 ‘ 7” in length my trailer is 13’ 1” and there is no way the cover will fit. Am returning.
Review from a similar PolyPro III in RV Covers
Thanks for reaching out after 1-year. To be honest I've been wanting to reach out for several months but didn't want to hassle with CS. I believe the cover itself is protective and does it's job. The problem I've had is all the securing straps have ripped off (with light wind) and now in order secure the cover I've had to create my own tie-downs and it's not working that well. The secure points are weak and if they go it's almost impossible to use. I will update with specific photos
Jenny N - 04/28/2022Review from a similar PolyPro III in RV Covers
While this is a custom cover meant for the small r-pod trailer, I purchased it for our ProLite Mini 13 based on recent reviews from others with the same trailer.
I was very pleased to see that the material and construction quality was similar if not identical to a number of excellent and durable covers I’ve used to store non-winter driven sports cars. However, the installation process was challenging for a number of reasons.
Firstly, after reading the Classic Accessories guide that instructed to unfold the cover from front to back on the roof of the trailer, I found that the manufacturer had folded and packed the cover incorrectly. Specifically, the cover was folded side to side instead of front to back, i.e.: the white roof section appeared at one end of the completely unfolded cover instead of appearing in the middle as expected. That meant we had to completely open up the cover on the roof of a car and manhandle it into place on the trailer after locating the yellow “front” label. The trailer is stored right next to our garage, so this task was not fun. We expected some fitment issues from a custom cover intended for something else, but not a packaging curve ball.
Secondly, (and I kick myself for not having noted this before we even started) the front and rear side profile contours of the r-pod are essentially the opposite of the ProLite Mini. So, not surprisingly, the “normal” fitment was unsatisfactory. After pulling and stretching to no avail, we still would have had poor rain runoff and unwanted Michigan snow buildup in loose folds at the at the front. So, we removed the cover and rotated it front to back for an almost perfect fit. It’s somewhat tight at the front and loose at the back, but much weather resistance than our first attempt. The only downside is that the zippered door section is now on the opposite side of the trailer, but it’s not a big issue for us.
As a sidebar, I’ve wondered why RV cover companies have neglected offering custom fitments for the Roulette ProLite line of Canadian trailers. Their market volume in the US and Canada is significant, and the weather conditions in Canada suggest a worthwhile sales rationale.
Review from a similar PolyPro III in RV Covers
Taking straight New Mexico sun, wind and rain and holding up perfectly.
Review from a similar PolyPro III in RV Covers
Great value for the price. I have a Little Guy Mini Max and this cover fit quite well. It did not cover the propane/battery compartment in the front, but it covered the camper nicely. At first it was a struggle to put on, but then we figured it out, and with two people it wasn’t hard once we knew what we were doing
Do you have a question about this RV Cover?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.