Video Transcript for Breaking Down the Mounting Bracket for Peterson Clearance and Side Marker Trailer Lights

Today we're taking a look at a bracket for Peterson trailer clearance and side marker lights. Now, this bracket simply let you mount a clearance and side marker light to your trailer. It's a surface mount design, mounting hardware is included, and it also comes with a foam mounting gasket.Now, the open back design allows room for wiring. It allows access to your plug. It's black in color, it's made from a durable plastic construction. We're going to go over a few measurements and I'll show you how to actually install a clearance light to the bracket.

Edge to edge right here, it's 2-7/8ths". Mount holes are separated on center by 2". Edge to edge going this direction, we're looking at about an 1-1/2". And then bottom to top is about a /12".So it's really simple. You would pick your mounting location, gasket, bracket, and hardware, mount that to your trailer.

Then you can take your light and you can see it has these little tabs on it, which secure in the clips on the sides of the bracket. So you just have to kind of siting there and an angle and then all you gotta do is push it until it clicks in the position. And that's all there is to it. You have access here at the back, so you still have access to the prongs, that we can connect your wiring and all that good stuff. But it's really simple to use.

Very easy. And it provides a nice, secure hold for the light.That's going to do it for today's look at the black plastic bracket for Peterson trailer clearance and side marker lights.