This 7-1/2" x 3-5/16" Fusion LED trailer light packs serious brightness into a sleek oval housing. With 20 diodes working together, it delivers crisp illumination for stop, tail, turn, and backup functions. The outer band of red LEDs handles stop, tail, and turn signals, while the center white LEDs light up for reverse. It’s efficient, draws less power at 12V, and lasts up to 50 times longer than old incandescent bulbs—no filaments to break and no bulbs to replace.
Launching a boat or hauling through bad weather is no problem for this light. The polycarbonate lens and housing are sonically sealed into one waterproof unit that’s fully submersible. That means no moisture sneaking in and no corrosion from water exposure. The durable surface-mount technology (SMT) circuit board design also helps it handle vibration and shock without losing reliability.
For a professional appearance without extra parts, this light mounts flush using its built-in black flange. The clean design fits neatly against the trailer surface for a streamlined finish. Mounting holes are spaced 6-15/16" apart horizontally and 2-3/4" apart vertically, so installation is straightforward and solid once in place.
Instead of juggling separate lights for each job, this single unit handles it all. The red outer lens handles braking and signaling with strong visibility, while the clear center section lights up bright white for backup. It’s hardwired with clear color-coded leads—black for tail, red for stop/turn, brown for backup, and white for ground—making wiring simple and dependable.
Safety isn’t just about brightness—it’s about compliance too. This light meets all DOT and FMVSS 108 requirements for automotive lighting, so you can count on it being road-legal wherever you’re towing. It’s dependable performance you can trust every time you hit the road.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this Optronics Oval Fusion LED hard-wired stop, tail, turn and backup trailer light with the red and the clear X lens. Now, this oval trailer tail light has a nice smooth, red exterior, which serves four functions. Now we do have this hooked up to some 12-volt power so we can show you those functions. So, we're gonna first start, I'll turn on the power and you'll see the tail light function come up.
We'll go ahead and turn off the overhead lights, and there's your tail light function. Now, when you do apply the brakes, you'll be able to see the lights get lot brighter, and you'll see that's 10 red LEDs that are working on that side there. And then when you hit your turn signal, same way, they get brighter, no flash. And the last one I wanna show you is the backup light. And the backup light will be that middle X there and those are gonna be all white LEDs, again, 10 of 'em.
And you'll be able to see when you go into reverse just like, that X will light up and it's all white LEDs. So, when you do go into reverse, people will be able to see that you are backing up. Go ahead and turn back on overhead lights. Go ahead and turn off our power. Now, this is a nice sonically sealed, waterproof housing and lens unit, so it does make it submersible.
It does use a durable SMT technology, which is surface mount technology, and that's the construction of the LED circuit board so that'll better withstand shock and vibration. It allows for improved heat distribution. We mentioned these are LEDs. These LEDs will make great replacements for regular incandescent lights 'cause they'll last 50 times longer. They're more efficient, which means they'll provide brighter light with less power output.
And the nice thing is no bulbs to replace or brittle filaments to break. And it does have lifetime warranty on the LEDs. We mentioned the red lens, which is set inside. It has the white X lens right here. So, the red lens area will be red LEDs for the tail light, 10 of 'em, and then the clear X will be 10 white LEDs for the backup light. This is a flush mount design. You can see it has the built-in black flange on it. Now, the hardwood install, this does not include it. You can see there's one, two, three, four holes for your screws to go through. Now, this is hard wired. It is ready to install. The wire length is about eight inches. Now, the wire configuration, the black is for your tail lights. The white is for your ground. The red is for your stop and turn, and the brown is for your backup light. This light is DOT, Department of Transportation compliant. Does meet the Federal Motor Vehicle Safety Standard 108 requirements for automotive lighting. It is a 12 volt light. Last thing, just give you some dimensions on this. Let me go ahead and get my ruler real quick. And the dimensions, overall dimensions on this light including the black flange. So, basically, we'll just turn it over this way and I'll be able to show you from one end to the other is right at 7 1/2 inches long. The width on it, including the flange again, is 3 1/4 inches wide. Total depth on this whole light is about 7/8 of an inch deep. Now, the light itself, just the light face length is 6 3/8 inches and the width is 2 1/8 inches. But that should do it for the review on the Optronics Oval Fusion LED hardwired stop, tail, turn and backup trailer light with the red and the clear X lens.
Ratings & Reviews
Awesome tail lights! Bright for brake lights and bright for reverse lights backing up
Great Lights, Diodes all remaining bright, Would Highly recommend
Awesome tails much nicer updated look on my service truck
One of the best trailer light kits I've ever had. Perfect fit for my trailer. Being able to have back-up lights now is a game changer and long overdue.
Very well made and I have no reservations that these lights will last a long time. I like the fact that they aren't overly bright while in running mode. Don't want to give an impression that brake lights are on until they are. When they are applied and ON there is no mistaking. Wonderful lights. Affordable and well made.
I bought a similar product on eBay and this one is much brighter, well worth the extra money!
Good all-in-one lights replaced my old old incandescent lights. Really visible. Works great. Plastic housing seems like it could be susceptible to damage.
These work great and fixed the problem with my truck and its trailer management system. I was having issues with a cheaper set I ordered from another site. My truck's fancy trailer management system would think there was a fault and cut power to the trailer lights. I replaced the lights with these and so far so good. Thank you!
Lights worked perfectly and it was very easy to I stalled.
Great product. Easy to install. Definitely recommend this product.
Great quality light. Replaced old incandescent lights with these LED lights on my boat trailer. They are much brighter.
Had to wing it since the wires weren't all the same color, but it appears this was the exact part I needed!
Wires not identified you have to go to website to confirm which wires are what. Other lights I have purchased were tagged
Added this to our Arcimoto that we converted to a flatbed. The electronics is driven by Pulse Width Modulation coding in an MRS Module and we don’t have the code. So we had to buy these with less draw (due to less LEDs). They work perfectly. The backups work perfectly (which it had none but the wiring was there). Probably the best lit Arcimoto in the world :) High quality. Fit in the grommet and bracket from another set of lights that had too much draw - so that shows these are very standard size. Pics show no backup, then backup. They are bright!
These are a perfect replacement for the old lights on my Aliner. Had them wired up in not time. The only thing that presented a problem is that they mount flush. This means that the wires have to line up with wiring holes on a camper. With an Aliner there is one hole for each side, but they are offset to the right. My solution for this is to make risers with cutaways for the wires to run in to the offset holes. I'm using plastic cutting board material to make the risers.
Great price, good quality. Worked great to rig up my RV receiver hitch toolbox with lights.
Quick shipping and everything arrived in great condition. These are going to look great on the back of my 2005 Jeep TJ
Love the super crisp color temperature and brightness and the reverse light. I've used a ton of Optronics products over the years and have never had one fail. I think these might be my favorite trailer lights yet!
This product is the missing link of the trailer market. There is no equivalent.
Shipping to Canada was fast and hassle free.
I strongly recommend the product and the seller.
You always have what I’m looking for. Good product, and got it quickly
Exactly what I was looking for & super fast response along with shipping
Great upgrade in brightness for my 2019 Keystone Cougar. Wiring was accurate. Always the only issue for me is clean caulking...but that's a me issue
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.