Thick, durable brake line kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 15' and 6' brake lines, (2) 3/16" flex lines, plus fittings and hardware. 1-800-940-8924 to order Hydrastar accessories and parts part number HS496-151 or order online at etrailer.com. Free expert support on all Hydrastar products. Great prices and Fastest Shipping for Hydrastar Hydraulic Brake Line Kit - Single Axle - 15' Long, 1/8" Main Line. Accessories and Parts reviews from real customers.
All Info
Reviews (3)
Q & A (0)
Related Parts
Photos
Hydrastar Accessories and Parts
- HS496-151
Brake Actuator
Trailer Brakes
Disc Brakes
Hydraulic Drum Brakes
Brake Lines
Hydrastar
Brake Line Kits
Steel Line and Flexible Hose
Single Axle
15 Feet Long
Thick, durable brake line kit lets you run brake fluid from your brake actuator to your trailer brakes. Ideal for trailers with disc brakes. Includes 15' and 6' brake lines, (2) 3/16" flex lines, plus fittings and hardware.
Features:
Brake lines and fittings let you run brake fluid from your brake actuator to your trailer brakes
Designed for use on single-axle trailers with drum or disc brakes
Flexible and kink-proof design is great for foldaway trailer tongues
More economical and easier to install than rigid steel lines
Thicker walls compared with standard steel brake line kits provide additional strength and durability
Rubber flex lines are perfect for disc brakes and torsion axles
Brass, male, double-flare nut fittings on ends of each hose
Corrosion-resistant, brass tee fitting connects 3 hydraulic lines
Female inverted flares (FIF) at each port
Heavy-duty hose clamps secure hoses to your trailer's frame
DOT compliant
Kit includes:
(1) 15' Long brake line with 3/8"-24 inverted flare nuts
(1) 6' Long brake line with 3/8"-24 inverted flare nuts
(2) 18" Male/male rubber flex lines
(1) 3/16" Brass, round T-fitting
(1) 3/16" Brass union fitting
1/2" Nylon hose clamps
3/16" Nylon hose clamps
Self-tapping screws
Specs:
Main line inner diameter: 1/8"
Fitting size: 3/16"
1-Year warranty
496-151 Hydra Star Hydraulic Brake Line Kit - Single Axle - 15' - 3/16" - Model BL-15S
WARNING: California Proposition 65
WARNING: This product contains chemicals known to the State of California to cause cancer or reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Customers Who Purchased This Accessories and Parts Also Bought...
This product was super easy to install. I pulled the old brake line out of the inside of the frame with a rope attached to the end and pulled the new brake line back into the frame. The only thing that would make this set better is they should include three flexible lines. You need one for each disk brake and a third for the jump off the axle to the 15 foot brake line. This is the only reason I give it four stars. BTW- I was my products were a little delayed because one item I ordered was on back order. I later learned that calling to place the order ensures priority and the person can check stock on the phone while you place your order. Don't just order online. 269225
I love my disc brakes! Every trailer should have them. They are worlds beyond electric brakes!!! They work just like the brakes on my truck....no herky jerky stopping with these. 416615
by:
Larry
05/30/2020
Item received was as described. Excellent packaging and fast delivery. 807431
3
3
true
See what our Experts say about this Hydrastar Accessories and Parts
Hey Scott! I recommend using the Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes # HS381-8067. Hydrastar is a reliable, proven brand so it will serve you well. Then for brake lines you can use the Hydrastar Hydraulic Brake Line Kit - Single Axle - 15' Long, 1/8" Main Line # HS496-151.
If you haven't already, make sure your 2k axles have a BTR spindle using # L44649 bearings to match the Kodiak Disc Brakes # KOD27FR. If you have a true 1" spindle with # L44643 bearings... view full answer...
Hi Josh; we don't have a kit but I can get you the parts you need. I'm assuming you have electric brakes right now so you're going to need the EOH actuator along with the brakes and hydraulic lines. I recommend the following:
-Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 8K # 23-402-403
-Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,200 psi # HBA-12 (the 1,200 psi model is required for 8k axles)
-Hydrastar Hydraulic Brake Line... view full answer...
Yes, it is possible to put hydraulic disc brakes on a tow dolly. We do not offer a kit specifically to add disc brakes on your dolly, but I am happy to walk you through all the parts you will need.
However, there are a couple of things we need to know to choose a disc brake kit for the dolly.You need to know what the weight capacity of the your axle is to make sure you get the correct brake assemblies. If you do not know the capacity, there should be a label or sticker on the axle that... view full answer...
The axle you purchased from us before is part # 35545E-ST-89. It uses inner bearing # L68149 and outer bearing # L44649.
Since you already have electric drum brakes all you need to convert your trailer to disc is the brakes, brake lines, and an actuator. You didn't say whether you want hydraulic or electric over hydraulic brakes. The only difference in parts is which actuator you choose. If you want hydraulic surge brakes I recommend part # T4745720 as long as you have a 1-7/8 or 2... view full answer...
To convert the 7k trailer axles of your trailer to Kodiak disc brakes the first thing you'd need is the correct hub/rotors which for that the part # KOD75FR would be a great option if your current hubs have 9/16 inch diameter wheel studs. If instead they are 1/2 inch you'd want the # KOD58FR.
For an actuator the Hydrastar options are the best way to go as we have found they are the most reliable and quickest reacting. So for that we have the kit part # HS381-9067. This also comes with... view full answer...
We do have one kit that may fit your 2200lb axle, but you will need to confirm which bearing combination it uses, and you will need to replace the wheels with 13" wheel as it is not compatible with your 14" wheels.
You can do this by removing one of your current hubs and looking for the bearing number stamped in the face of each bearing as shown in the included picture of the # L44649.
As long as your bearing combination is inner and outer bearing # L44649 you will need the Kodiak Disc... view full answer...
Starting with the axles, we do not carry any galvanized axles in the dimension you are needing. You may consider taking the axles you already have and having them galvanized at a local facility as long as they are not otherwise damaged. While we do not carry sealed hubs like the Vortex we do have a Stainless Hub # KH42655S. You will need a Inner Bearing # 25580, Outer Bearing # 15123 and Grease Seal # GS-2250DL(2.25" ID) or # GS-2125DL(2.125" ID) for each hub. The Bearing Buddy # BB2441SS... view full answer...
The HydraStar Vented Marine Electric Over Hydraulic Actuator # HS381-8065 is available in a kit. The HydraStar Marine Electric Over Hydraulic Actuator with Breakaway and 7-Way RV Harness # HS381-9065 features the actuator, breakaway system and 7-way connector. The only other piece you'd need is the brake lines; for a single axle you would want the HydraStar Hydraulic Brake Line Kit # HS496-151 and for a double axle you would want # HS496-152.
I've added links to video reviews of these... view full answer...
Since the ProLube kit # XLPROLUBE2440KIT is only rated for use on 5,200 to 6,000 pound axles I do not recommend using it for 7,000 pound axles. Grease would be better for marine applications since a hub full of grease repels water and an oil bath hub could just let the water set on top.
The correct grease seal for disc brake kit # K2HR712D is # RG06-070. It does have an inner diameter of 2.25 inches and the outer diameter at 3.376 inches will fit the hub in the disc brake kit.
Spring... view full answer...
The Titan Zinc-Plated, A-Frame Brake Actuator part # T4045500 is designed for a standard 50 degree a-frame trailer which is most common so if this is what you have then it will work well. That said, you'd need to remove the air over hydraulic actuator and run brake lines back to each of the braking assemblies with the HydraStar Hydraulic Brake Line Kit part # HS496-151. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.