To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Don't let thieves steal your cargo or tailgate. This ABS plastic tailgate handle has a keyed, steel tailgate lock, and the lock cylinder can be keyed to match your truck key. This handle replaces OEM handle. Great for tonneaus or camper shells.
Features:
Replace your existing factory tailgate handle with this ABS plastic tailgate handle that has a built-in manual lock. And you won't have to carry any extra keys. The lock cylinder for this tailgate lock can be keyed to match your truck key using patented BOLT codeable technology. Simply insert the key in the lock and turn it clockwise until it stops turning. Then remove the key. It's as easy as that. Your key will now unlock your tailgate. Use the Pop & Lock with your truck-bed cover or camper shell whenever you need to lock up valuables in your truck bed
The Pop & Lock locking mechanism is made of sturdy, armored steel to resist tampering. The lock is raised slightly for convenient key access and to help prevent pinching. And the handle installs easily using basic tools - no welding or drilling is necessary. The custom design gives you a straight-from-the-factory look, and the Barcelona Red color complements any other red trim on your truck.
A new tailgate can cost you hundreds - the Pop & Lock saves you the cost and aggravation of replacing a stolen tailgate.
Ratings & Reviews
The new lock is very good, the key setup is a little hard to follow, I did get it to work finally but was not straight forward, over all I am happy with the product.
This is just what I needed for my 2015 Tacoma. I bought the pickup a few months ago and put a bed cover on it. I needed a tailgate lock and Pop & Lock has met that need. It looks almost original and works great! Would definitely recommend if you need a tailgate lock for your pickup.
I give the product only three stars for the following :
I have a 2015 Tacoma and 3/4 years ago I ordered a POP AND LOCK for my truck. Last week I went to open the tail gate and heard a snap and the key turned 360. Being the tail gate was closed I had a hard time getting to the linkage and locking device with the tail gate closed. I finally was able to remove the plastic cover without damaging the Tacoma cover. I found the finger that operates the lock/open linkage to be snapped. I am the only one using the lock . So I can say it wasn't broke by undo force. So I ordered a new POP/LOCK. when I received it , I had a terrible time getting the old one removed. Three of the 4 10mm screws came out without a problem . The fourth one wouldn't come out. This was one of the two that hold in the camera. The metal threaded part was spinning inside the plastic. My guess this was because of two different metals (the 10mm screw and the metal threaded insert ). I had to carefully destroy the old POP/LOCK to save the piece that holds in the camera. Luckily, I did save the piece. I installed the new POP/LOCK and used never seize on the threads.
I have the following suggestions. Supply new screws that are the same metal as the inserts . Tell in the instruction to use a never seize on the threads.
Etrailer has good products and the Pop & Lock tailgate handle is fine. Delivery was on time, as usual.
Works and fits great
Excellent product! I installed the tailgate handle with lock on my 2013 Toyota Tacoma in less than 30-minutes, including the backup camera. The fit and finish looks OEM and it functions as advertised. The Codes to Ignition Key feature is an added plus. I highly recommend this product!
Works great
Great product easy to install but wish I knew I could've gotten the same color as truck but all in all I'm happy with jt
Worked perfectly!
Installation was easy. I really like the color match. I also like that it locks.
Very easy to install works well no more tailgate theft worries
Initial order was in limbo because UPS lost it during hubs. etrailer was not only quick to send a new unit out but very kind during the process. Service was phenomenal. Product is 3-4 star. Everything works like it should however this is the second time I've purchased this unit for the same truck. Handle is thin plastic and gets weak after about 5 years.
Easy to install, perfect match to my 2014 Tacoma, and color looks great!
Easy peasy install
Instalation went well , key locked & unlocked, then closed gate, and locked again,but then the left side of gate would not open. OH MY, ha. Somehow the sm. Plastic lock for the rod came loose.oh my, but thanks to my HEAVENLY FATHER , after some time I was able to remove screws and force my hand in to pull rod open an replace.thanks looks good.
looks good fits perfect. install went very easy but not to sure if the handle will last long seems a little on the weak side.
For the cost, I was expecting a much nicer finish. The paint is dull compared to my truck, and it’s basically mostly plastic for that price of a far superior latch assy. 2 years ago I purchased a metal replacement latch assy for my Chevy pickup that only cost around $40. Both units have the same key-coding process.
Absolutely perfect fit, finish and function. Great replacement product.
Color match was a little off not too bad. The fit was good. The handle is very cheap feeling and flimsy. I'm trying to be careful with it. Not really worth what I had to pay, but no other options.
Tailgate handle feels sturdy. It was an easy installation probably less than 10 minutes. However, it is not the most ergonomic handle. Takes quite a good amount of strength to open the tailgate. It’s a bit clunky not so smooth but the lock now works with my ignition key so that’s good.
Installed lock unit in very short time with no hassles. Was very happy with ease of installation and fit.
Have plenty of faith that this tailgate lock system will give years of service.
Needed to have items secure in bed of truck while traveling.
It matches my 2005 Tacoma paint silver streak mica. Easy to install with u tube video. The feature that keys the lock to the ignition key is great. Don't have to carry an extra key. Also, etrailer's processing, pick and tracking information was excellent.
Arrived on time and as advertised. Found a great You tube video that covered installation. Was able to do so in 30 minutes. Only suggestion is that the package came with no instructions but had a QR code. Unfortunately, the QR led me to a brief installation guide with size 4 font. Nonetheless, it was pretty straightforward to install. Another challenge, nothing to do with the product, was unplugging the harness connector to the camera! Just a note for future buyers to be prepared for. All automotive connectors have latches but over time these latches can lose their elasticity so I had to use a small screwdriver to disengage, being careful to to break it. The key setting feature is awesome allowing me to use my ignition key to lock and unlock the tailgate latch.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.