What Timken Bearing Kit Fits My 2024 GD Imagine 2600 with axle# LC152 - SBSA -86.5-68.5- NOSP-OS -L?
Updated 08/05/2026 | Published 08/01/2026
Products Featured in This Question
Question:
I received a Timkin bearing kit for my GD Imagine 2600 2024—L68149-L68111 x2, L44610-L44649x2, seal 473336x1. Order 125057102. I was told this would fit. These are for 3500lb axles. I believe GD changed to 4400lb axles in the later years of this model. Is this the proper kit for my axles? The label on my axle states in part: “Item V000845594…Cust Part 120410…Serial S011064962… LC152 - SBSA -86.5-68.5- NOSP-OS -L-65517-RED -ABS-7225-30SPT-CAP”. Can you verify that the kit you sent is the proper one? Thanks.
asked by: Shan D
Expert Reply:
Hi Shan,
It is common for the 3.5K and 4.4K Lippert axles to use the same bearings and seals, so often the same kit is suggested for both. However, the axle serial number that you included, "LC152 - SBSA -86.5-68.5- NOSP-OS -L-65517-RED -ABS-7225-30SPT-CAP” breaks down to a Lippert 5.2K axle based off of the LC152 so the TMK52VR wouldn't work for 5.2K axles.
Your axles should have the EZ-Lube spindles on them, so instead you'll need the Timken Bearing Kit LM67048/25580 Bearings, LM67010/25520 Races, 413470 Seal part # TMK22VR. The TMK22VR kit has the tang washer that you'll need for the EZ-lube spindle. There are two different seals that could be used for this hub, so you can always purchase this kit and buy the other seal variation just in case. Which is the Timken Grease and Oil Seal with 2.250" inner diameter part # TMK98ZR.
If you can tell me the number that is pressed into the cast iron on your hubs, I can use that to confirm that these are the proper bearings you need.
Product Page this Question was Asked From
Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- Timken
more information >
Continue Researching
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Bearings and Seals for 2021 Grand Design Imagine 22MLE XLS
- Q&A: Difference Between etrailer and Timken Bearing Kit
- Article: Trailer Wiring Diagrams
- Q&A: Looking for Replacement Bearing Kit for 2022 Imagine 2400 BH
- Q&A: What Timken Bearings, Races, Washer, and Cotter Pin do I Need for My 2,200 BTR Spindle/Axle?
- Q&A: Bearing Kit Recommendation for 2018 Jayco with 3,500 Lippert Axles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Maintenance Schedule
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern