bing tracking image
  1. Tonneau Cover
  2. Retrax
  3. Retractable - Manual
  4. Low Profile - Top of Bed Rails
  5. Rack Compatible
  6. Hard Plastic
THIS ITEM IS NOT A FIT FOR
2004 Chrysler Concorde
Retrax

RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots

Part Number: RTT-60335
In Stock
$1,799.99
Retail:$1,849.99
You Save: $50.00
Tonneau Cover
Not Confirmed to Fit

2004 Chrysler Concorde

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo. Great Prices for the best tonneau cover from Retrax. RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots part number RTT-60335 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (34)
  • Q & A (0)
  • Photos

Retrax Tonneau Cover - RTT-60335

Highlights

  • Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
  • Locks Down Your Gear: Polycarbonate cover with built-in lock keeps cargo secure and hidden.
  • Use a Rack Too: T-slots in side rails let you mount Yakima, Thule, or Rhino racks above the bed.
  • All-Weather Protection: Foam seals and drain tubes keep rain, snow, and dust out of the bed.
  • Full Bed Access: Retracts into a small canister, giving you open space for large cargo.
  • Built to Last: Lexan cover holds 200 lbs evenly and withstands -50 °F to 200 °F without cracking.
Made in USA

Features to know about

Secure Cargo in Any Weather: Lockable Polycarbonate Construction

Keeping gear safe from rain, snow, and prying eyes is easy with the RetraxONE XR. The cover is built from high-quality Lexan polycarbonate, the same material used in jet canopies, and reinforced with 5/8" thick aluminum I-beams every 4-3/4" for strength. It locks anywhere along the rails using a pop-up handle that sits flush when closed, sealing tight with weather stripping and foam gaskets on all sides. The result is a cover that stays watertight, resists dents, and shields your cargo from UV rays, dust, and debris year-round.

Side-by-side view showing RetraxONE XR tonneau cover locking handle closed with protective lid concealing keyhole.

Close-up of RetraxONE XR tonneau cover bulkhead weather seal providing barrier against water and dust.

Truck with tailgate open and RetraxONE XR tonneau cover closed, showing independent tailgate and cover operation.

Full Bed Use Without Removing the Cover: Retractable Design

When you’re hauling oversized gear, the RetraxONE XR glides open in seconds and rolls into a compact 13-1/2" deep x 12" tall canister. The sealed ball-bearing rollers move smoothly without lubrication, and the spiral track system inside the canister keeps the slats from touching each other so they don’t scratch or bind. You can even lock the cover partway open to balance long items at the tailgate while keeping smaller cargo covered up front.

Side-by-side view showing RetraxONE XR tonneau cover pop-up handle used for opening and closing the retractable truck bed cover.

Side-by-side image showing RetraxONE XR tonneau cover with open handle and exposed key lock for unlocking operation.

Transparent view of RetraxONE XR tonneau cover canister showing internal spiral track system that prevents wear while retracting.

Side-by-side images showing RetraxONE XR tonneau cover partially open and latched along rails for adjustable cargo access.

Carry More Above the Bed: Built-In T-Slot Rails

The integrated Trax Rail System lets you attach T-slot-compatible crossbars or racks from Yakima, Thule, or Rhino-Rack (sold separately). That means you can haul bikes, kayaks, or ladders above the bed while keeping your covered storage below. The rails sit just 1" above the bed for a low-profile look, and the retractable cover still works normally with the racks mounted.

RetraxONE XR Trax Rail System showing integrated T-slot channels for mounting roof racks or accessories.

RetraxONE XR tonneau cover installed over fifth-wheel hitch showing low-profile clearance for towing setups.

Built to Last Through Heat, Cold, and Years of Use: Maintenance-Free Operation

This cover is designed to perform in temperatures from -50°F to 200°F without swelling, cracking, or fading. The matte black finish resists scratches and stays cool to the touch even in direct sun. With no springs, snaps, or hook-and-loop strips to wear out, it’s a simple, reliable system that stays smooth and secure over time.

Pickup truck with RetraxONE XR matte black retractable tonneau cover showing sleek, low-profile design.

Flush-mounted RetraxONE XR tonneau cover showing sleek, aerodynamic alignment with canister and truck bed.

Quick, No-Drill Setup: Clamp-On Rails with Drain Tubes

Installation is straightforward—just clamp the rails to your bed, attach the canister, and route the included drain tubes through existing holes so any water that gets inside is channeled out. The canister’s angled bottom saves space underneath, leaving more room for cargo while keeping the retracted cover protected and dry.

Two people installing RetraxONE XR tonneau cover canister onto truck bed during setup process.

Close-up of RetraxONE XR tonneau cover drain tube connection for water management system.

Angled view of RetraxONE XR tonneau cover canister with angled bottom design to maximize truck bed space.

Specs

Weight and Capacity

  • Weight capacity: 200 lbs evenly distributed

Dimensions

  • Canister dimensions: 13-1/2" deep x 12" tall

Cross-sectional diagram of RetraxONE XR retractable tonneau cover showing sealed ball-bearing roller mechanism and rail track system for smooth cover operation.

Warranty

  • Limited lifetime warranty

Technical installation diagram showing RetraxONE XR tonneau cover side rail attachment and clamp positions.

T-60335 Retrax RetraxONE XR Hard Bed Cover w/ Trax Rails - Retractable - Lexan - Matte

Installation Details RTT-60335 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.7

34 reviews
Review sort icon
Install crossbars (sold separately) in the slotted rails of this long-lasting cover to carry your bikes, kayaks, and more above your bed. Manually operate the cover with the pop-up, locking handle, which gives you the best security for your cargo.

by:

Looks good and feels sturdy



by:

Awesome product as it was easy to insta ll!



by:

Still works great. Been outside in the elements for a year. Looks and functions great.



by:

The install is complete. I'd prefer a hard copy of the directions. The little point and shoot QR code took me to the wrong cover. After a little work I did find the correct one. This added a good 30 minutes to the install time. Little trouble with the adjustment. I might have to adjust a little more in the days to come. I'm conservative with the 4 star rating. Time will tell, could move to 5. The MAJOR concern...the delivery company delivered it to the wrong address. Thankfully I have honest neighbors otherwise someone would have been out $[XX].

I'd have a conversation with the delivery company if I were y'all.



by:

Product very good. Drain plugs could fit better keeps popping out



by:

perfect fit. solid build. Fast shipping



by:

Installation went well. Quality workman ship.



by:

E trailer is great. But when the cover arrived and I installed it the cover had a hole in it or a small flaw



by:

I have seen this product on other trucks and liked it. It was fairly easy to install(some good videos on[line]) my son helped me, two people make it go faster and easier. Thanks for the good service and price.



by:

Looks very sharp and fits well on my 2022 Silverado 1500 5'8" bed, and the fits well with Rihno Rack heavy duty crossbars 65" long.



by:

Shipping was fast. Everything arrived in tact.
The instructions for the cover were fairly easy to follow and it fit our 2023 Canyon Denali with a spray in bedliner perfectly.



by:

Works good overall. Opens, closes and locks very well. I get some water coming in on the sides , driving in the rain. Not pleased with the connections on the drain tubes. I have had to glue them in more than once, even during initial install. I did not like the fact that I had to drill those 1/2" holes in the bed for them as well.



by:

The product quality is very good, and I anticipate many years of useful service. Regrettably, the assembly directions are somewhat superficial. Identifying hardware (i.e.: screw size, color, etc.) is particularly challenging as there is not an actual size comparison chart. Properly aligning the product was also very difficult, multiple attempts were required.



by:

Fantastic cover. Perfect for my needs. Performs better than I imagined it would. Ability to access bed instantly with supplies... Yakima rack on/off in literally less than two minutes. Drive a black limited Tacoma. Perfect match for this truck. From sleek to bound for the trails in no time.



by:

Very good quality tonneau cover and it just glides when opening and closing. Installation was super easy too.



by:

Excellent shipping. No damage. Installation instructions were easy to follow. No complex tools needed. Lightweight product. Easy lifting and maneuvering into position.



by:

etrailer had excellent communication and the cover came in sooner than expected. The Retrax cover was flawless and had excellent instructions for easy installation!



by:

Everybody at etrailer have always provided excellent customer service. Thank You,



by:

I spent more time getting the cover aligned than assembling and getting it onto the truck bed rails. The instructions are very good. I had to adjust the top jaws of the all the rail clamps since I have the T-slot XR rail system. I used a thin piece of cardstock to check for unwanted clearance between the jaw and truck bed flange. Since I didn't have a very large drill bit, I used a Dremel sanding bit to enlarge the pilot hole that I drilled through the plastic bed plug for the drain tube. That worked fine. The cover looks great and seems to operate well on this first day of installation and use. The T-slot rails do not get in the way of using the hand-holes for the rear step bumper.



by:

The install was very easy but definitely a two man operation. The section that holds the rolled up cover is pretty large so you do lose some space. That section is also is fairly thin walled. I have dented and scratched it pretty good but it doesn't affect its function. I put one of those cargo load bars across the bed in front of it to try and stop that. I did have it "rack" a little after some rough drives which can cause it to bind a bit when rolling up. But it always closed on the second or third try. And its easy to straighten up again if needed. No water has gotten in the bed and it sure makes grocery getting a whole lot easier. I think its great.



by:

Piece of junk. It ripples in the wind like a tarp over the back of the pickup. The canister does not roll up without having to be forced it in, mostly due to the ripples from driving down the highway. 2 stars because it could work well, the parts and design, if the actual cover were designed for the use it is intended for.



by:

Great accessory for our F-150. Installation isn't too bad if you just take it slow and double-check everything as you go. Looks are top-notch, and the functionality has been excellent. Gives us an extra sense of security being able to lock the cover when needed. You lose a small amount of bed space, but so far it hasn't caused any problems for us. Did I mention it looks great?



by:



by:

Pretty decent cover and installation was reasonable. I’m still not sure how water resistant it will be but we will see. It is replacing a folding cover and thus far it is easier to use. I’ll have to see if it is worth the space trade off but I didn’t like the rear window being blocked when the folding cover was open.



by:

So far I have about 10000 miles on this set up and the Retrax cover has been great, love being able to keep prying eyes off my gear and water infiltration has been minimal. This is the plastic version and seems to be holding up fine to the elements thus far…time will tell, there is a slight loss of cargo space with this unit installed but it hasn’t been an issue for me. I am very happy overall to this point.


25
25

See what our Experts say about this Retrax Tonneau Cover

  • Will a Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Work w/ a RetraxPro Tonneau Cover?
    Hey Matt, welcome back. So long as you have a RetraxPro XR like item # RTT-60335, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters item # Y01151-5955 will indeed work. However, if you have a RetraxPro MX like item # RTX56FR it won't because you don't have the t-slots. Please note that the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters item # Y01151-5755 is the correct ladder rack for a 2021 Ford Ranger. This has 60" crossbars...
    view full answer...
  • Bed Ladder Rack And Tonneau Cover Combination For A 2021 Ford Ranger
    I have a solution for your 2021 Ford Ranger; I recommend using the RetraxONE XR Hard Tonneau Cover # RTX98FR for 6' beds, or the RetraxONE XR Hard Tonneau Cover # RTT-60335 for 5' beds. For a bed rack, I recommend using the Yakima OverHaul HD Adjustable Truck Bed # Y01151; This rack will allow you to carry the skis and kayaks you mentioned, in conjunction with your tonneau cover. You will need an adapter # Y01155 for the RetraxONE XR tonneau cover to use the Yakima Overhaul HD.
    view full answer...
  • Tonneau Cover, Ladder Rack, and E-Bike Rack Recommendation for 2021 Ford Ranger
    The highest capacity roof rack bike rack that could mount to ladder rack bars like you mentioned would be the Inno Tire Hold II part # INA389 which has a 50 lb weight capacity. Now for the tonneau you'd want the Retrax Pro XR part # RTT-60335 for if you have a 5 foot bed or part # RTX98FR for if you have a 6 foot bed. Then for a mid level ladder rack that fits the channels of both of these covers you'd want the Yakima Outpost HD part # Y01152-5755.
    view full answer...
  • Recommended Tonneau Cover Compatible with Yakima Overhaul HD Ladder Rack
    There are tonneau covers for your 2020 Ford Ranger that are compatible with the Yakima Overhaul HD # Y01151-58, and it's one of our more popular tonneaus. Have a look at the Retrax XR Series with Trax Rails which is part # RTX98FR for the 6ft bed on the Ranger and part # RTT-60335 for the 5 foot bed. Using the Retrax XR does require the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01155. This is a manually retracting hard cover made of hard Lexan...
    view full answer...
  • Which T-Bolts Need To Be Used with the Retrax XR Hard Tonneau Covers
    In regards to the Retrax XR Hard Tonneau Covers like part # RTT-60335, they accept track mounted accessories from all major brands such as Thule, Yakima, and Rhino-Rack. That said, they don't really offer just the t-bolts since they will be included with said accessory. The Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers part # RRVA165B-RRRLT600 for example which is what I recommend will come wit the correct t-bolts to use within the tracks on...
    view full answer...
  • What is the Difference between the Switchblade # 311-SWFA30A61 and the RetraxONE XR # RTT-60335?
    There are some differences to consider with the Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWFA30A61 and the RetraxONE XR Hard Tonneau Cover - Retractable # RTT-60335. First off, the Switchblade involves an integrated pulls strap that allows for easy opening/closing while the RetraxONE XR omits this feature. As far as some of the advantages of the RetraxONE XR, it has a locking handle that can be locked at any point along the rails. Also, a huge advantage is that the...
    view full answer...
  • Tonneau Cover and Ladder Rack Recommendation for a 2022 Ford Ranger 5 Foot Bed
    I have a few tonneau cover and ladder rack combinations for your 2022 Ford Ranger with the 5' bed. My top recommendation is the RetraxONE XR Hard Tonneau Cover # RTT-60335 and the Yakima OverHaul HD # Y01151-5855 because because it gives you the most adjustability for both products. The tonneau cover is retractable and can be locked anywhere along the rails and it also has T-Slots on the bed rails so that the ladder rack can slide back and forth. The OverHaul HD has a height adjustment...
    view full answer...
  • Best Tonneau Cover For a 2024 Ford Ranger
    I recommend the RetraxONE XR Hard Tonneau Cover # RTT-60335 as the best cover we have for your 2024 Ford Ranger. I like this cover since it easily retracts into the front of the bed and can lock in any position for irregular loads. It also has the t-slots in the bed rails which will allow you to add crossbars or a roof rack if you have any desire to carry large objects like kayaks. The cover can also support weights up to 200lbs and since it has polycarbonate slats they will not tear or...
    view full answer...
  • Bed Cover And Ladder Rack Options For A 2022 Ford Range With A 5 Foot Bed
    You definitely have options for adding a tonneau cover and ladder rack to your 2022 Ford Ranger with a 5 foot bed. As requested, I have the top of the line best option listed first, then the more economical option listed second. With that said, let's get into it. The RetraxONE XR Hard Tonneau Cover # RTT-60335 is one of my favorite covers currently on the market. This is due to it retracting into a canister when open so it does not block your rear window at all. Being American made and...
    view full answer...
  • Mid Level Ladder Rack and Tonneau Cover Recommendation for 2020 Ford Ranger Short Bed
    Best option for a mid level ladder rack for the bed of your 2020 Ford Ranger short bed would be the Yakima OutPost HD part # Y01155-58 with the RetraxONE XR retractable tonneau cover with tracks part # RTT-60335 and the Yakima adapter # Y01155. The bars of this kit are 68 inches long so you'd have plenty of room for both.
    view full answer...
  • Tonneau Cover for 2021 Ford Ranger 5' Bed that Fits with Yakima Overhaul Ladder Rack
    The TS rail kits do fit the Truxedo Sentry tonneau covers like the part # TX66SR that you referenced but we do not have a set that fits your 2021 Ford Ranger 5 foot bed so your best option would be a similar cover that has these slots built in like the RetraxONE XR part # RTT-60335 which then would allow you to use the Yakima OverHaul HD Ladder Rack part # Y01151-5855 which fits the channels of the Retrax with the included adapter.
    view full answer...
  • Best Tonneau Cover and Ladder Rack for a 2019 Ford Ranger With 5 Foot Bed
    I do have an option for you but Thule does not offer a Thule TracRac SR Sliding Truck Bed Ladder Rack for the 2019 Ford Ranger. The only way I have for you to use both a ladder rack and tonneau cover is with the RetraxOne XR Hard Tonneau Cover part # RTT-60335 and the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Retrax XR Tonneau Cover part # Y01151-5755. The Yakima OverHaul HD can be removed much easier than the Thule TracRac SR and it is also adjustable. There would be no way...
    view full answer...
  • Does the RetraxONE XR Hard Tonneau Cover Fit a 2023 Ford Ranger w/ a 5' Bed?
    Yes, it can. The RetraxONE XR Hard Tonneau Cover item # RTT-60335 is confirmed to fit the 2023 Ford Ranger's with a 5' bed. The crew cab option does not effect the tonneau cover. The shipping package will be 88" x 20" x 16" and weigh 95 lbs.
    view full answer...
  • Mid Level Ladder Rack and Tonneau Cover that Can Fit 2020 Ford Ranger Short Bed
    The best solution is to use the Yakima Outpost HD mid level ladder rack # Y01152-58 with the adapter # Y01155 and the Retrax ONE retractable ladder rack # RTT-60335 which are all a fit for your 2020 Ford Ranger short bed. There isn't a roll up option that would work.
    view full answer...
  • Recommended Ladder Rack for 2019 Ford Ranger 5' Bed with RetraxONE XR Tonneau Cover
    The RetraxONE XR Hard Tonneau Cover part # RTT-60335 which is a fit for a 2019 Ford Ranger with 5' bed has a set of side rails built-in which will allow you to use channel mount roof or ladder racks. If you are looking for a ladder rack, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part # Y01151-5855 is our best option as it's adjustable. The Truck Hero Elevate Rack System is not available through etrailer as of (May 2020) due to quality control issues.
    view full answer...
  • Recommendation of Rack & Tonneau Cover for 2021 Ford Ranger
    I recommend using the RetraxONE XR Hard Tonneau Cover, # RTT-60335 and the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack, # Y01151-5855
    view full answer...
  • RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford Ranger
    The # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
    view full answer...


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Tyler C
Edited by:
Tyler C
Employee Wilson B
Updated by:
Wilson B
Employee Mark S
Written by:
Mark S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924