Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2016 Winnebago Trend Motorhome
We'll connect you with nearby partnered installers who know this exact setup.
Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black
Part Number: 311-JRC2576
In Stock
$1,442.44
Retail:$1,748.61
You Save: $306.17
2016 Winnebago Trend Motorhome
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (129)
- Q & A (0)
- Photos
- Used (1)
Pace Edwards Tonneau Cover - 311-JRC2576
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Hard Cover Keeps Everything Out: Vinyl-over-aluminum panels lock anywhere on the rails to secure gear.
- Full Bed Use in Seconds: Retracts into a 9-1/4" x 9-3/4" canister so tall or long cargo still fits.
- Keeps Cargo Dry: Drain tubes and foam seals channel water away from the bed.
- Smooth, Easy Operation: Tension spring and pull strap let the cover glide open or closed.
- Low-Profile Look: Flush inside-rail mount reduces drag and gives a clean, aerodynamic style.
Features to know about
Smooth Bed Access: Retractable Design with Continuous Tension Spring
Getting to your gear shouldn’t mean taking off the whole cover. The JackRabbit retracts into a canister at the front of the bed, giving you full access in seconds. A quick turn of the lock knob activates a continuous tension spring so the cover slides open smoothly and evenly. When you need to close it, the built-in pull strap lets you draw it back over the bed, and it can stop at 12-inch intervals for partial coverage. The low-profile design keeps your rear window clear and doesn’t eat up bed space, even when retracted.
Year-Round Cargo Protection: ArmorTek Construction
Rain, dust, or snow—your gear stays protected. The deck is built from vinyl bonded to rigid aluminum slats, combining the seamless look of a soft cover with the strength of a hard one. Foam seals under the rails and canister, plus a large rear seal at the tailgate, help keep water out. The weather-resistant ArmorTek surface holds up to sun and road grime without cracking or peeling, so it looks good and works hard season after season.
Secure Storage: Lockable Cover with Aluminum Panels
When closed and used with a locked tailgate, the JackRabbit keeps your bed secure. The heavy-gauge aluminum panels resist cutting or prying better than soft or folding covers. You can lock the cover at any point along the rails using the key latch—perfect for protecting tools or gear while hauling taller items like coolers or boxes near the cab. Two keys are included for convenience.
Clean Look and Better Efficiency: Flush Mount Style
This cover sits level with the bed rails for a flush, aerodynamic profile that reduces wind drag and helps improve gas mileage. The black vinyl-coated finish blends cleanly with your truck’s lines instead of sitting bulky on top. With its canister measuring just 9-1/4" tall by 9-3/4" deep, it stays compact and out of sight while still shielding the retracted panels from dirt and debris.
Easy Setup: Clamp-On, No-Drill Installation
You don’t need to drill holes or run power tools to get this cover mounted. The frame rails clamp inside your bed rails with two clamps per side, while shims ensure a proper fit on tapered beds. Drain tubes route through existing holes in the bed floor to keep water moving out. Once installed, you’re ready for secure storage without giving up full use of your truck bed.
Specs
Dimensions
- Canister dimensions: 9-1/4" tall x 9-3/4" deep
Warranty
- Warranty: 5-Year warranty
Note
- Note: The highest point of the fifth-wheel hitch must be at least 2" below the bed rails.
JRC2576 Pace Edwards Jack Rabbit Hard Truck Bed Cover - Retractable - Aluminum and Vinyl - Black
This Product Fits The Following Vehicles
- 1988 - 1998 Chevrolet C/K Series Pickup 6 Foot Bed - Stepside
- 1988 - 1998 GMC C/K Series Pickup 6 Foot Bed - Stepside
- 1999 - 2006 GMC Sierra 1500 - 6-1/2 Foot Bed - Stepside
- 2007 - 2007 GMC Sierra Classic 1500 - 6-1/2 Foot Bed - Stepside
- 1999 - 2006 Chevrolet Silverado 1500 - 6-1/2 Foot Bed - Stepside
- 2007 - 2007 Chevrolet Silverado Classic 1500 - 6-1/2 Foot Bed - Stepside
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.5
129 reviews
by:
Dennis
03/19/2026
Excellent fit on my step side. Recommend dry fitting on the floor before installing on the pickup.
by:
Jeff
08/10/2025
Came a little bent so took awhile to get it together, still making adjustments to get this to work better but looks nice
by:
Mack
08/07/2024
Not as easily done by yourself but doable though. Took me about a hour. Looks great. Had questions about the bedcovers on top edge, to leave or remove. See pics. For some reason it was a little snug at backend of truck bed.
Mack
8/8/2025
Had an issue with cover ping out but called costumer support and they were great. He reminded me to check the fasteners and he was spot on. Tighten up and cured my issues. Would buy it again. Love the look and operation.
by:
Jon
07/13/2025
Just installed but so far,I love it. Had difficulty installing the side rails while it was sitting on the box in the bed. Tried 3 times and couldn't get it. Took everything out of the bed, placed it on the ground, rotated 90 degrees. This way the rails were installed vertically. Fell into place. Obviously, this way took an additional person, but it worked.
Jon
7/15/2026
Bed cover is still working great after a year. Only downside is the amount of space that it takes up in the bed.
by:
Howard
10/11/2025
The bed cover is great. The instructions not to much. They were quite confusing. And the Allen key and socket/wrench sizes in the tools required section were not the correct sizing.
I did the whole install in around 2.5 hours all by myself. It’s doable, but would be much much easier with a second person.
I did the whole install in around 2.5 hours all by myself. It’s doable, but would be much much easier with a second person.
Lazer S.
10/14/2025
Good choice with the JackRabbit, Howard! I've had one on my Silverado since 2018 and it's still holding up quite well. One piece of advice though, don't shove something like a bookcase into it when it isn't opened up all the way. I sorta kinda maybe did that and have to finesse it to get it completely open now. It still works though. : P I have heard they can be a bit of a pain to install, but I had our installers handle that. So I guess I cheated a little. What are you keeping in your bed?
by:
Keith
10/15/2026
I like this cover way more than Truxedo Sentry because I can see my fifth wheel hitch to hook it up! I like the sleek design and really doesn’t effect my room in the bed!
by:
Don
10/07/2026
Excellent product, sliding the rails through the blanket guides was a little tricky On one side until I realized the blanket shifted in the canister during shipping. That could be stated in step 3 to check for proper alignment before trying to install rails.
Love the cover
Love the cover
by:
James
05/15/2024
I like it much better than my old Flip Pac. It seems about as sturdy as the Flip Pac as well, I anticipated it would be more rigid, but that was only my perception so I did not knock a star off. Very easy to use. The instructions need an update, it looks as though they are now doing a step during assembly. Would have been much easier to install with a second person, like stated in the instructions, but I did manage by myself. Realy like the look and fitment, haven't tested the water tightness yet.
James
5/16/2025
Still looks and works great. The rubber seal at the rear is easy to knock out of the track, Ive done it three or four times now, and it is a little bit of a pain to get it back in the track. I may RTV it in place. The truck rarely sees rain, Ive road tripped it to Colorado twice, Texas once, and Phoenix once with this tonneau on. Everything in the bed stayed dry and clean. I caught snow twice on those road trips, once in Steamboat and once in Flagstaff. Usually if the truck is not on the road it lives in the garage, but it did spend two months outside this winter when I had two dailies breakdown, washed it and Armoralled it and it looks good as new again.
by:
Peter
05/27/2026
I was really disappointed in this cover. I've had retractable ones on other trucks and this one is cheaper than ones I've had in the past. It has a plastic drum where as better ones are made of stainless steel. The locking mechanize is really difficult to turn and I have already had problems with it. The installation directions are useless.
I would not recommend this cover. If it wasn't so heavy I would have returned it.
I would not recommend this cover. If it wasn't so heavy I would have returned it.
by:
Michael
08/17/2026
2024
Ram
3500
I like the look and fit, getting the rails to slide in to the canister was a little challenging - but over all it works well. I will say the clamps have grooves in them to slide in for locking - I had a really hard time getting those to slide into place.
by:
Gregory
10/26/2025
2026
Ford
F-350 Super Duty
Had a small cut in the vinyl but I didn't have time to return it. Instructions are basically near ridiculous. I had to reread 5 times and photos are worthless. Ultimately it's installed and working as advertised. Kinda of expensive.
by:
Jose
09/17/2026
Had to use parts from my old retractable cover to complete the project .
by:
Larry
05/27/2023
2022
Chevrolet
Silverado 2500
Great service from etrailer! Was backordered, they kept me updated well. When it came in, I was headed out of town so ONE call placed it on hold until I returned. It was queued up to ship when I returned, and that is exactly what happened. I missed the notes in reviews about the video, so I went with the paper. Did a little figuring-out and got it installed, but one side would not roll out. Cant see the mechanics of it in the cannister, so I called Pace-Edwards. They connected me with an engineer who correctly diagnosed the problem, sent the needed part, told me the procedure to effect the corrections, and it is now the best top I've had (and there have been many...). So, the shims that are on the clamps are on the clamps already installed on the rail, not the ones you install. And you need to be sure both sides of the mat are in front of the guide before you install the rails. If you read this review, the take-away is watch the video, heed the advice, and yes, the new tow-beast DOES fit in the garage. If only just...
Larry
6/7/2024
Still good, but tough to keep it sliding smoothly, it leaks a lot fore and aft, has a tendency to be hard to unlock binds on the passenger side, but still gets out of the way for the fifth wheel, covers front part of bed while towing, and still looks great. I am not aware of a better product that will do what I need and fix the issues I have with this one.
Kevin C.
6/7/2024
@Larry You lubricate the rails with part # RM-747 to help the cover slide without attracting any dirt or debris that could end up binding the cover. The tailgate seal can be replaced with # PE99CV if it's worn out.
by:
Greg
11/26/2024
Dodge
Ram Pickup
This is the second Pace Edwards Tonneau cover I’ve owned. My first was on my 2021 Ram and the second went on my 2024 Chevrolet 3500 High Country. Both cover have worked flawlessly and I have no regrets purchasing these two covers.
Greg
11/27/2025
Great, this is my second Tonneau cover from etrailer. The first cover was sold on a 2021 Ram and my Second tonneau cover is on a 2024 Chevy Silverado 3500 that currently up for sale. Both covers worked flawlessly.
by:
Dale
10/01/2026
dodge
Ram Pickup
Have not installed it yet but I am very happy with the one I had on my ram truck and will be installing this one on my Ford this weekend
Mike L.
10/1/2026
Please let us know how you like it, Dale!
by:
Too expensive, left with doubt.
07/28/2026
2024
Dodge
Caliber
The directions seem attempted but, not updated or clear at all. The screws and bold threads were cheap, strip out easy. It looks sharp but, if a tight seal is needed, this is not it at all. It is for “locking/hiding items, monsoon or snow main protection but, stuff is going to get wet 100%. For a product of the caliber and cost, these types of things create doubt in a product and longevity.
by:
Mike
05/06/2026
I just love the Tonneau cover! It was easy to install and keeps everything dry and clean. My son and grandson are jealous and want one for their pickups.
by:
Steve
07/28/2025
2025
Ford
F-350 Super Duty
product arrrived when it was suspossed too. Works good. Had to partially redo the install has one side was stuck. got it to work fine.
Steve
7/29/2026
its been a year. I like the cover but it does have some issues with the latch not connecting correctly. I would rate the cover a 7.5 out of 10. Mostly keeps items dry unless it is a hard rain.
by:
Michael
05/20/2026
Ram
2500
Great product!! Installation was pretty easy. Attaching the side rails were a little tricky at first, but once you figure out how they attach, pretty easy from there. Looks good on my Chevy 2500 HD! Highly recommend it!
by:
Mark
01/19/2026
Cover works as advertised and it’s a great option for a long bed truck with a fifth wheel hitch. Going to order a second cover for my wife’s truck.
The included instructions are lame so make sure you watch the etrailer install videos. They are so
Much better and answer most of the questions.
The included instructions are lame so make sure you watch the etrailer install videos. They are so
Much better and answer most of the questions.
by:
Kevin
12/26/2024
2009
Ram
3500
On a 2009 GMC Sierra 3500 HD it was a straight forward installation. 2 people a few hours. The old cover was shot. I'm very pleased with this cover, as it opens/closes and latches easily.
Kevin M.
12/27/2025
After a year of service the tonneau is still working like new. No mechanical issues and I do clean it and apply 303 every month. Im very pleased with it.
by:
Timothy
11/18/2025
2026
GMC
Sierra 1500
RECEIVED THE COVER IN A TIMELY FASHION, OPEN MAIN BOX AND NO DAMAGE , SLID THE RAILS OUT OF THE CARDBOARD , THEY WERE WRAPPED IN PLASTIC THEY LOOKED FINE BUT A FEW DAYS LATER WHEN i STARTED THE INSTALL THE RIGHT RAIL AND A MAJOR BLEMISH ON THE INSIDE RAIL. DURING INSTALL HAD A MAJOR PROBLEM INSTALLING TH RIGHT RAIL WOULD NOT SLIDE ONTO THE BOX WITH THE COVER VERY EASILY TOOK ABOUT HALF HOUR TO FINALLY SLIDEING IT ON. WHEN I WENT TO INSTAL THE REAR RIGHT SIDE RAIL THE CLAMP WOULD NOT SLIDE INTO THE GROOVE AT ALL. HAD TO JUST HAVE IT SLIDE ABOUT A 1/2" INTO THE SLOT BUT THEN THE LEVELING RAIL SCREW WOULDNT WORK BECAUSE THE CLAMP WASN'T GOING INTO THE SLOT IN THE PROPER PLACE. THE RIGHT RAIL WASN'T MANUFACTURED VERY WELL AT ALL. ALSO THE TOP COVER OF THE BOX WHICH WAS WRAPPED VERY WELL BUT THE TOP RIGHT SIDE FINISH WAS NOT IN GOOD CONDITION HAD A FADED LOOK TO IT.
by:
Gene
04/05/2022
2015
Ford
F-150
The Jack Rabbit is a great Tonneau cover. It looks great and the installation process is pretty straight forward. I like the fact that it is very low profile. It provides the security of a hard cover but is very easy to retract and get out of the way for hauling.
by:
James
04/19/2024
2017
GMC
Sierra 3500
Looks great. Protects items stored in the bed. Opens up to use fifth wheel hitch. Just what we needed. That's the positive side. It took a long time to get it. It was quite a bit of work to install it. But it does fit well and it appears to be excellent.
25
129
true
Show More Reviews
See what our Experts say about this Pace Edwards Tonneau Cover
- Best Low Profile Hard Tonneau Cover For 2004 GMC StepsideHello Denville, thanks for getting in touch. We do have a cover for the 2004 GMC stepside that is not a vinyl cover. Take a look at the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC2576. The cover itself is made of aluminum panels that retract into a canister behind the cab. This is considered a low profile cover. It installs inside and flush with the bed rails. If security is your concern the cover is also lockable. It is going to take a lot more than a knife to get...
view full answer... - Recommended Hard Tonneau Cover for a 1993 GMC Sierra w/a 6' Long Stepside BedThanks for the information Cesar. To add a hard tonneau cover to your 1993 GMC Sierra's Stepside 6' long bed, I recommend the Pace Edwards JackRabbit item # 311-JRC2576. This is a retractable cover made of aluminum and vinyl. It comes with clamps that will attach to your Sierra's bed rails without drilling to secure the cover. The Pace Edwards JackRabbit item # 311-JRC2576 is a low profile cover that can be used in the closed or open position. The cover can be locked at 12" intervals...
view full answer... - Tonneau Cover Recommendation for 1990 Chevy C1500 6ft Bed StepsideHey Jason, yes the Pace Edwards Jack Rabbit Hard Truck Bed Cover # 311-JRC2576 is a confirmed fit for your 1990 Chevy C1500 6 foot bed with a stepside. I really like this cover for you as it's very secure and also easy to open and close. This is a more expensive type of tonneau cover for sure so while really nice if you were wanting a soft cover instead that is easier on the wallet we have the Access Original part # 834532000210 that fits as well. Have you had tonneaus before?
view full answer... - Is There Pace Edwards JackRabbit that Fits 2006 Chevy Silverado Long BedHey Scott, I have a solution for you but the Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC2576 only fits the 6-1/2 foot beds. For a JackRabbit that fits the 8 foot bed version of your 2006 Chevy Silverado we have the part # 311-JRC0404 instead.
view full answer... - Retractable Hard Tonneau Cover That Fits 1997 Chevy C/K Series Stepside With 6-1/2 Foot BedThere are a couple of great options for retractable hard tonneau covers that fit your 1997 Chevy C/K Stepside with a 6-1/2 foot bed, both of which are from Pace Edwards. - Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC2576 - Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover # 311-FMC2576 There is just one difference between these tonneaus; the Full-Metal JackRabbit has all aluminum panels with a black powder coat finish, while the standard JackRabbit...
view full answer... - What Retractable Cover will Work on My 1994 GMC Sierra 1/2 Ton with a Stepside Bed?Hello Louis, Congrats on the 1994, that’s a truck you can still work on, and honestly the older trucks are way cooler than the spaceships we drive around today. For your 1994 GMC 1/2 ton Sierra with a stepside bed, the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover - Aluminum - Black # 311-FMC2576 you were looking at is confirmed to fit your bed, so you’re good there. This is the all-aluminum option and gives you a really solid, low-profile cover that keeps things protected...
view full answer... - Will The Pace Edwards JackRabbit 311-JRC2576 Fit A 2003 Chevy Silverado Short Bed Stepside?The Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC2576 will definitely fit your 2003 Chevy Silverado with a 6.5 foot stepside bed. I have actually had a JackRabbit on my 2016 Silverado, though not a stepside, for a few years now and absolutely love it. These are very sturdy and completely secured when the tailgate is locked. I really like how it retracts into the canister as well so the back window isn't blocked like the hard folding covers tend to do.
view full answer... - Drilling A Pace Edwards JackRabbit Tonneau Cover Installation On A 2001 GMC Sierra StepsideLet me start by apologizing. I check our website and I did not find any disclaimer saying the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black, part # 311-JRC2576, for your 2001 GMC Sierra stepside, required drilling. I did speak with someone at Pace Edwards and they did offer some trouble shooting advice for your installation. They suggested to use the area just to the side of the slots to attach the rails. They also recommended to align everything properly,...
view full answer... - Correct Pace Edwards JackRabbit Retractable Hard Tonneau Cover for a 1999 GMC Sierra StepsideThe correct Pace Edwards JackRabbit Retractable Hard Tonneau Cover for a 1999 GMC Sierra Stepside is part # 311-JRC2576.
view full answer... - Pace Edwards JackRabbit Retractable Hard Tonneau Cover For a 1994 Chevrolet K1500 PickupThe Pace Edwards JackRabbit Retractable Hard Tonneau Cover # 311-JRC2576 will fit your 1994 Chevrolet Silverado K1500 4x4 as long as you have the 6-1/2' step-side bed. If you have a 6-1/2' bed which is not the step-side you will need the Cover # 311-JRC0303 or the Cover # 311-JRC0404 for an 8' long bed.
view full answer...
Do you have a question about this Tonneau Cover?
Used Items Available
Condition: Missing Parts
Notes: Item is missing the side rails. Otherwsie new and unused.
Info for this part was:
Video by:
Andrew K
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Dustin K
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Mark S
Written by:
Denise W
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
3/1/2025
Thanks for including a photo and video with your feedback, Denville! I agree with you, it does look great!