Video Transcript for Complete Breakdown of the West Virginia Chrome Logo Emblem 2" Hitch Cover

Today we're going to be taking a look at the West Virginia two inch hitch cover from AMG. The hitch covers going to allow you to show your school pride. It adds a clean finish look to your hitch. It's going to help keep dirt and grime out of the receive tube of your hitch. The hitch cover's made from a steel construction. It's going to feature a really nice black powder coat finish which is going to great job at resisting rust and corrosion.

Here at the front we have a chrome plated metal emblem. It's got a nice rustproof and fade proof design. The product is made right here in the U.S.A. On the back side, it's got a foam gasket that goes around the piece that slides into the receiver tube of our hitch. The foam gasket hitch is going to really reduce rattle in between the hitch and the hitch cover.

This is an officially licensed product. It does require a hitch pin and clip or a hitch lock to get it fully installed in the hitch. Those items are sold separately but if you in need of one you can find them here at etrailer.com. The pin holes on the cover will accept the standard 5/8 inch diameter pin. Taking a few measurements, beginning here at the hitch cover face, it's going to give us an overall width of around five inches, with an overall height measurement of around three and half inches. Then the distance that we have from the back of the foam pad to the center of the hitch pin hole, it's going to be pretty close to two and half inches.

This is designed for a two inch by two inch hitch. Very simple installation, slide it into the received tube of your hitch until your pin holes lined up and it's secure with a hitch pin and clip or a hitch lock. That's going to do it for today's look at the West Virginia two inch hitch cover from AMG.