SeaSucker Ridge Ready Monkey Bars Roof Rack - Round Bars - Oval Vacuum Cup Mount - 60" Long

See what our Experts say about this SeaSucker Roof Rack

• Roof Rack For Carrying a Kayak on a 2021 Toyota Venza XLE With Roof Side Rails
  While I cannot find anyone who makes a roof rack specific to your 2021 Toyota Venza XLE having the side rails we do have the SeaSucker Ridge Ready Monkey Bars Roof Rack # SEA66VR. This universal rack uses vacuum cups to attach to the roof. For a rack to secure your kayak there are several options. Personally I prefer the Thule Hullavator # TH898 as it allows you to load the kayak onto the rack and then raise onto the roof. If you have no problem lifting the Kayak then you could look at...
  view full answer...
• Dimension of the Cups for the SeaSucker Monkey Bars Roof Rack
  Hey Matt. The round cups measure 6" in diameter on the 60" SeaSucker Monkey Bars Roof Rack item # SEA99FR you were looking at. The oval cups measure 7-1/4" long x 3-1/8" wide on the same size 60" SeaSucker Ridge Ready Monkey Bars Roof Rack item # SEA66VR. I recommend going with the round cup item # SEA99FR. They have close to a 25% stronger pull strength rating. What are you planning on using a roof rack for?
  view full answer...
• 2025 GMC Yukon AT4 Roof Rack Recommendation for Low-Clearance on Garage Door
  Hey Thomas, thanks for reaching out! The lowest-profile roof rack that fits the flush rails on your 2025 GMC Yukon is the Thule WingBar Edge # TH47WG and it sits roughly 4-1/4" above your roof. A possible alternative for you is the SeaSucker Ridge Ready Monkey Bars Roof Rack # SEA66VR because it can be removed pretty easily whenever you need to take it off of the Yukon. I've used a SeaSucker roof rack before and not only was it super easy to install, but it took literally a minute to...
  view full answer...
• Roof Rack Options For a 2008 Toyota Sequoia With Naked Roof
  While I do see your 2008 Toyota Sequoia is available without the raised side rails the only roof rack option we have custom fit for your roof is the Front Runner Slimline II Platform Rack # FR72XJ. This rack attaches using the same mounting points the factory raised rails would attach to. As a universal option we do have the SeaSucker Ridge Ready Monkey Bars Roof Rack # SEA66VR if you are only wanting the crossbars. I cannot verify any rack for a Tundra would also fit your Sequoia but since...
  view full answer...
• Is The SeaSucker Ridge Ready Monkey Bars Roof Rack Compatible With Textured Roofs
  I reached out to SeaSucker and they confirmed that the SeaSucker Ridge Ready Monkey Bars Roof Rack # SEA66VR would still work even though your Wrangler has a textured roof. I've attached a short video below where Evangeline will walk you through the installation process.
  view full answer...
• Recommendation For Reducing Wind Resistance On Enclosed Trailer Pulled By Honda Odyssey
  Using a Rooftop Cargo Box # Y07334 would only provide a slight reduction in wind resistance since the box is only 24" wide. A better solution would be to use a Fairing # Y05019. This particular fairing is 52" wide and will attach to round, square, aero, elliptical, and most factory crossbars. If your Honda Odyssey does not have a roof rack we can help you find one or you can look at a universal option like the SeaSucker # SEA66VR. This roof rack would allow you to easily move the fairing...
  view full answer...
• Is There a Roof Rack For a 2017 Chrysler Pacifica With Side Rails To Carry a Rooftop Cargo Box?
  It appears no one manufactures an aftermarket set of crossbars for your 2017 Chrysler Pacifica so your best bet is going to be finding a set of the factory crossbars to mount to your side bars. If you cannot locate these we do offer the SeaSucker Ridge Ready Monkey Bars Roof Rack # SEA66VR which will vacuum cup to the roof and then let you attach the Thule Motion XT Rooftop Cargo Box # TH629806,
  view full answer...
• Best Roof Rack for a 2023 Ford Bronco Hard Top w/ No Side Rails
  I would be happy to! I checked with our vendors and since your 2023 Ford Bronco's hard top does not have roof rails you're going to have to go with a universal option. There are no custom fit ones since you don't have those rails. I recommend the SeaSucker Ridge Ready Monkey Bars Roof Rack item # SEA66VR. These Ridge Ready mounts are specifically designed to work with Bronco hard tops that have ridges on the roof and not completely flat surfaces. They attach with oval vacuum cups that...
  view full answer...
• Roof Rack Confirmed To Work On a 2023 Ford Transit T350 Bare Roof
  The Rhino-Rack RLTP Legs for Factory Fixed Mounting Points # RRRLTPFC-2 are confirmed by Rhino-Rack to fit the factory mounting points you should have in the roof of your 2023 Ford Transit. If you do not have the access holes for the factory mounting points you will need to use a rack like the SeaSucker # SEA66VR which uses vacuum cups to hold to your roof.
  view full answer...

Do you have a question about this Roof Rack?