See what our Experts say about this Rhino Rack Roof Rack

• Higher Weight Capacity Ladder Rack that Fits 2019 Ford F-250
  Since your plan is to install the Retrax PowerTrax Pro XR # RTT-80384 if you have a long bed or # RTT-80383 for if you have a short bed all you'd need to install a Yakima OverHaul HD part # Y01151-58 ladder rack which has a 500 lb capacity would be the adapter # Y01155 and that would be covered. Now if you do need more weight capacity the TracRac sliding ladder racks like the # TH43003XT-785 for short bed or # TH43003XT-000 for a long bed and these do have a weight capacity of 1,250 lbs....
  view full answer...
• Comparison of Rhino-Rack Heavy-Duty and Rhino-Rack Vortex Aero Roof Racks
  The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets # RRRCB-RSHB-RJHB as an example. That's the purpose of the name, and the advantage of the rack. This rack is made up of the following parts: Rhino-Rack Heavy-Duty Roof Rack Crossbars: # RB1375 Qty 2 Rhino-Rack Quick Mount Legs: # RRRLT600 Qty 4 Roof Rack Leg Spacer Blocks: # RRQMHD05-2 Qty...
  view full answer...
• Rhino-Rack Roof Rack Recommendation for a 1989 Mitsubishi Montero with a Naked Roof
  You are correct, the Rhino-Rack Roof Rack Legs that you need for your 1989 Mitsubishi Montero are part # RL280S4. These are the gutter mount feet and they are 11 inches tall. For crossbars, you can use their Heavy-Duty Crossbars, # RB1375B-2 for black or # RB1375 for silver. I have attached the installation instructions for you to check out.
  view full answer...
  
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Roof Rack Recommendation for 2019 Hyundai Elantra and iKamper
  For a 2019 Hyundai Elantra with a naked roof, I suggest the Thule SquareBar Evo Crossbars, 53" Long, # TH712400. These will mount to a GT model with or without a glass roof using using the Evo clamp feet, # TH710501 and the fit kit, # TH145112. Or, if you have a sedan, use the Evo clamp feet, # TH710501 and the fit kit, # TH145069. These crossbars have a weight capacity of 220 lbs. The weight a roof rack can support is also limited by the roof capacity for the vehicle, this is outlined...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Roof Rack Recommendation For 2005 Scion xB
  I understand how it can be a bit confusing so I will do what I can to help out. We do offer several different roof racks that are designed to fit your 2005 Scion xB. The main differences you will find are due to the design of the crossbars. Square crossbars can be quite a lot noisier than some of the more aerodynamic crossbars we offer. For a nice roof rack for your vehicle, I recommend the Rhino-Rack RS 2500 Roof Rack for Naked Roofs, part # RRRS434B. This system has aerodynamic aluminum...
  view full answer...
• 2017 Hyundai Santa Fe Sport with Panoramic Sunroof and Flush Rails
  Rhino Rack does offer roof racks that fit the low profile flush rails you have on the roof of your 2017 Hyundai Santa Fe Sport with the part numbers # RRVA137B-2 and # RRSX032 but the HD bar kit you mentioned would only fit the versions of your vehicle without the flush rails. This is an aero bar style rack too which means you'd have minimal wind noise as well as better fuel mileage. The sunroof you have won't be an issue for sure when it's closed, but Rhino Rack recommends checking for...
  view full answer...
• Roof Rack, Canoe Carrier and Bike Carrier for 2007 Ford Edge w/ Panoramic Roof
  The Rhino Rack Heavy Duty Crossbar Roof Rack, which consists of the # RB1375 crossbars, the # RRRLKHD roof rack legs and the # DK228 clamp kit would be a fit for a 2007 Ford Edge. You'll want to be careful about opening the sunroof with the roof rack in place. The rack or accessories mounted on it might interfere with the operation of the sunroof. Although the crossbars themselves have a 140 lb weight capacity, you might be limited by the roof capacity of the vehicle if it's capacity...
  view full answer...
• Roof Rack / Crossbar Options For 2020 Ford Escape With Or Without Existing Rails
  I have a solution for you, however, my contact at Rhino-Rack confirmed that the Rhino-Rack Heavy-Duty Roof Rack Crossbar # RB1375 is not compatible with your 2020 Ford Escape. It looks like you have a naked/bare roof, in which case you will want to use Rhino-Rack # RR86TB. This kit comes with everything necessary for installation and is going to be your best option for your vehicle with the naked roof and no factory rails of any kind. This setup has a weight capacity of 165lbs and comes...
  view full answer...
• What Parts do I Need with My Rhino-Rack 54" HD Crossbars to Fit on My 2012 Ford Edge with Bare Roof?
  According to my research of your Rhino-Rack part number 1375, I think you are most likely referring to the Rhino-Rack Heavy Duty Crossbars -54" Long # RB1375B-2 (black) or # RB1375 (silver) which are confirmed to fit a bare-roof 2012 Ford Edge. If this is what you have, you need the Rhino-Rack 2500 Series Legs # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK228. With both of these components, you will have a full roof rack system on your...
  view full answer...
• Recommended Roof Rack For A 2012 GMC Sierra W/ Extended Cab On A Naked Roof
  I do have a roof rack option that will fit your 2012 GMC Sierra Extended Cab. Unfortunately, it will not be a Thule Rack because the fit kit has been discontinued. I do have a Rhino-Rack alternative that has a maximum weight capacity of 130 lbs with their heavy duty crossbar. This rack will consist of the following items: Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 54" Long - Qty 2, part # RB1375 Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting...
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Avalanche for Transporting Ladder
  For your 2004 Chevy Avalanche the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK227 has been confirmed as a fit and would work well. Your sunroof wouldn't be an issue either. I would recommend keeping it closed since it will be very loud transporting a ladder up there from the wind noise. However, I have a better solution for you in terms of a roof rack for securing a ladder. Instead I would recommend the Rhino Rack HD bar roof rack part numbers # RB1375, # RRRLKHD,...
  view full answer...
• Roof Rack Recommendation for a 2015 Hyundai Santa Fe Sport with Naked Roof
  The factory side rails on vehicles usually can't be installed on models that did not originally come with them but that would be a question best handled by a Hyundai dealer who will then probably steer you towards an aftermarket roof rack. So we can cut out the middle man and go right to an aftermarket roof rack. The addition of the clamps on a roof rack does not add any extra wind noise compare to models that don't have a clamp style roof rack. In fact, it is entirely possible, even likely,...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2011 GMC Sierra 3500 Crew Cab with Naked Roof
  For your 2011 GMC Sierra 3500 Crew Cab with a naked roof, the Rhino-Rack Heavy-Duty Roof Rack referenced in your question is indeed confirmed to fit the roof of your truck. This system consists of # RB1375 for the two 54 inch Heavy-Duty Crossbars, # RRRLKHD for the 2500 Series Legs, and # DK227 for the Custom DK Fit Kit. This system will provide you with extremely durable aluminum crossbars with built-in C-channels for mounting Rhino-Rack, contractor-grade accessories. The bars themselves...
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Does the Rhino-Rack HD Crossbars # RB1375 Fit a 2021 Nissan Sentra?
  I have a great alternative for you. Unfortunately, the Rhino-Rack Heavy Duty Crossbars # RB1375 will not fit your 2021 Nissan Sentra. For heavy-duty bars that are confirmed to fit your 2021 Nissan Sentra with a bare roof, I recommend the following parts: - Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 -...
  view full answer...
• Roof Rack Mounted Fork Mount Bike Rack Recommendations for a 2016 Toyota Highlander
  A popular roof rack mounted bike rack, fork mount, that is very stable is the Rhino-Rack MountainTrail # RBC035. This carrier is also compatible with disc brakes, accommodates bike wheels up to 3" in diameter, and uses a 9mm skewer. I have linked a video review of this carrier for you. If your bike has a through-axle then I recommend the Yakima HighSpeed, # Y02115. It is designed to hold a bike with a 12-mm, 15-mm, or 20-mm thru-axle fork without an adapter. I have linked a video review...
  view full answer...
• Will Rhino Rack HD Roof Rack Fit 2012 Honda CR-V with Moon Roof
  The Rhino Rack HD Roof Rack part numbers # RB1375, # RRRLKHD, and # DK284 is a confirmed fit for your 2012 Honda CR-V. It will fit your vehicle with the moonroof, but if your moonroof angles up when opening it could potentially interfere with the bars. You should note that crossbars typically add quite a bit of wind noise. You won't end up wanting to have the moonroof open with the bars installed as it will be quite noisy.
  view full answer...
• Would Two Sets of Rhino Rack Heavy Duty Bars Double Roof Rack Capacity
  You would be doubling the weight capacity of the roof rack components of the setup but most likely you'd be limited by the roof capacity as the HD Rhino Rack roof rack components do have a capacity of 220 lbs. You'd need a set of tracks like the part # RTC16, four sets of the feet part # RLT500, and two sets of the 65 inch Rhino Rack bars part # RB1650B-2.
  view full answer...
• Roof Rack, Bike Rack, and Trailer Hitch Recommendations for a 2015 Ford Transit Connect
  You can add a roof rack to your 2015 Ford Transit Connect. If your van does not have the factory side rails then I recommend a Rhino-Rack roof rack using the following parts: Vortex bars # RRVA137B-2 Feet # RRRLKVA Fit kit # DK417 If you prefer the heavy duty rectangular bars then you would need bars # RB1375, legs # RRRLKHD, and fit kit # DK417. For any roof rack check the vehicle owner's manual or with Ford to determine the capacity of the van roof and go by whichever is lower. For...
  view full answer...
• Longer Crossbar Roof Rack that Fits 2022 Chevy Colorado
  The crossbars of the Rhino Rack and other roof racks that fit your 2022 Chevy Colorado don't have channels on the underside that run the full length of the bar. Since this is what the rack uses to attach to the feet of the rack it means you can't use longer bars as the feet won't attach. So the best option would be the 54 inch long Rhino Rack HD bar system part numbers # RB1375, # RRRLKHD, # DK330 which is the longest bar setup that fits your truck.
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• What Is The Load Bearing Capacity Of The RRRLKHD Legs And DK498 Fit Kit?
  Hello Larry, thanks for reaching out. The Rhino-Rack 2500 Series Legs # RRRLKHD have a 165 lb capacity. The # DK498 does not have a specific capacity assigned to it, meaning the capacity will be determined by the legs, so 165 lb capacity. As with any roof rack system, make sure you observe your vehicles maximum roof load capacity.
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Are Feet and Fit Kit Available for Rhino Rack HD Rack RR28DP for Silverado
  Hey Jonathon, we do have just the replacement feet of the # RR28DP available with the part # RRRLKHD and the fit kit # DK427. I'd definitely brag to your wife how much money you saved just getting the feet and reusing your current bars haha.
  view full answer...
• Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
  I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
  To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
  view full answer...
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
  I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
  The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Mounting the Rhino-Rack Batwing Awning to a 2013 Toyota Tacoma
  The Rhino-Rack Batwing Awning, # RR33200 is designed to bolt to a Rhino-Rack Pioneer platform or crossbars with top channels, using hardware sold separately. For your 2013 Toyota Tacoma, you will need the Batwing and Foxwing Awning Relocation Kit for Rhino-Rack Heavy-Duty Crossbars, # RR31102 and note that this awning is only compatible with crossbars that extend past the roof rack's legs. I suggest the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 54", # RB1375B-2 with the Rhino-Rack...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• Ladder Rack Recommendation for Camper Shell on 2002 Toyota Tacoma
  We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part # TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to the cap. See picture. I also attached an install video link for you to check out as well.
  view full answer...
  
• Roof Rack, Canoe Carrier and Bike Carrier for 2007 Ford Edge w/ Panoramic Roof
  The Rhino Rack Heavy Duty Crossbar Roof Rack, which consists of the # RB1375 crossbars, the # RRRLKHD roof rack legs and the # DK228 clamp kit would be a fit for a 2007 Ford Edge. You'll want to be careful about opening the sunroof with the roof rack in place. The rack or accessories mounted on it might interfere with the operation of the sunroof. Although the crossbars themselves have a 140 lb weight capacity, you might be limited by the roof capacity of the vehicle if it's capacity...
  view full answer...
• Recommended Roof Rack and Kayak Carriers for 2018 Nissan Frontier Crew Cab
  For your 2018 Nissan Frontier Crew Cab, I recommend the Rhino-Rack roof rack consisting of: Rhino-Rack Vortex Aero Crossbars -54" Long # RRVA137B-2 Rhino-Rack 2500 Series Legs # RRRLKVA Custom DK Fit Kit # DK108 Locking Endcaps for Vortex Aero Crossbars - Metal Cores # RRVA-LEC4 Then I recommend the Rhino-Rack J-Style Kayak Carrier # S510 and # RRS512X for your two kayaks. Finally you may want to consider the Rhino-Rack Universal Load Assist # RR-RUSL to help you safely load your kayaks.
  view full answer...
• Where Do The Feet For A Rhino Rack ROC25 Roof Rack Need To Be On A 2009 Nissan Frontier Crew Cab
  When installing the Rhino Rack ROC25 Roof Rack # RR26ZR on your 2009 Nissan Frontier Crew Cab, you will want to mount the center of the front clamp 260mm forward of the center of the door pillar. The center of the rear clamp will then need to be installed 750mm back from the center of the front clamp. The easiest way to do this is get both the front and rear bars installed loosely and then slide them into the correct positions. I included a diagram of where these will install as well for...
  view full answer...
  
• Roof Rack and watersports carriers for 2017 Nissan Frontier naked roof
  The roof rack systems that attach to the door jam / gutter of your vehicle are actually very reliable and sturdy. This is a common setup and I am confident you won't have issues with this mounting style; and this way you won't be drilling into the roof of a newer vehicle. For your 2017 Nissan Frontier with naked roof, I recommend going with Rhino-Rack Vortex Aero Crossbars 54" # RRVA137B-2 and Mounting Legs # RRRLKVA. These crossbars are aerodynamic which means less wind noise than other...
  view full answer...
• Roof Rack Solution for 2010 Nissan Frontier
  Since the Q-tower racks have been phased out Yakima does not have any fits for the 2010 Nissan Frontier. For a great rack at a great price the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK108 would work well. This is a square bar roof rack at a price that is much lower than the Yakima racks yet gives you a very high quality rack.
  view full answer...
• Can Two Yakima DeepSpace Cargo Boxes Fit On A 2019 Nissan Frontier Roof Rack?
  It looks like you were checking out the Yakima DeepSpace 10 Rooftop Cargo Box - 10 cu ft - Black # Y65RR. This fits most crossbars and will have no problem fitting on your 2019 Nissan Frontier. Since you don't have a roof rack yet, I recommend looking into the Rhino-Rack Vortex Aero Crossbars Black - 54" # RRVA137B-2 that you were looking at. You will also need Legs # RRRLKVA and Fit Kit # DK108. The box is only 23" wide, so if you used two of them side by side you would need a minimum...
  view full answer...
• Compatibility of the Rhino-Rack 2500 Series Roof Rack on a 2016 Nissan Frontier Crew Cab
  For your 2016 Nissan Frontier CrewCab I recommend the Rhino-Rack Vortex Aero Crossbars, # RRVA137B-2, Rhino-Rack 2500 Series Legs, # RRRLKVA, and the Rhino-Rack Fit Kit for the 2016 Nissan Frontier, # DK108. This is a complete kit with everything you need for roof rack. Let me know what you plan to use it for and I can make some recommendations on accessories to help.
  view full answer...
• Roof Rack Options for a 2011 Nissan Frontier Crew Cab
  If your 2011 Nissan Frontier Crew Cab has a naked roof, there are some options for adding a roof rack that are not permanent installations. You can use the Rhino-Rack 2500 Vortex Roof Rack with Aero Crossbars, # RRVA137B-2, feet # RRRLKVA, and the Custom DK Clamps and Pads, # DK108. If you have another type of roof (tracks that run front to back or raised rails that run front to back) there are other roof rack options. I have included a link to the roof rack main page for your vehicle....
  view full answer...
• Correct Channel Strip Lengths for Installing the # DK108 on a 2017 Nissan Frontier Crew Cab
  I went ahead and double checked with Rhino-Rack, and you are correct that the recommended strip channel length is 107mm for the front and 102mm for the rear crossbar when using the DK Fit Kit # DK108 on your 2017 Nissan Frontier Crew Cab. With your current fitment, there are a few different reasons to consider when mounting: - The front and rear measurements were not accurate when you measured - The front and rear crossbars were accidentally flipped so that the rear is at the front and...
  view full answer...
  
• Roof Rack and Fairing Recommendation for a 2014 Nissan Frontier
  For your 2014 Nissan Frontier the Rhino Rack roof rack part numbers # RRVA137B-2, # RRRLKVA, and # DK108 is a confirmed fit. Since the bar is 54 inches long you would want the fairing part # RRRF4 which is 50 inches long.
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform Rack to Bare Roof of 2018 Nissan Frontier
  Great question! The Rhino-Rack Pioneer Platform Rack # RR57AB is designed for vehicles with raised side rails so since you have a bare roof on your 2018 Nissan Frontier you can either use the 60" Long x 54" Wide Pioneer Platform Rack # RR39QX which comes with tracks you'll install on your roof OR you can use the 58" Long x 47" Wide Rack # RR42115BF with a roof rack that clamps to the frame of your truck. If you choose to go with the roof rack option I recommend picking up a Vortex roof...
  view full answer...
• Roof Rack and Kayak Carrier Recommendation for a 2016 Nissan Frontier Crew Cab
  Yes, the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK108 will fit your 2016 Nissan Frontier 4-door. The Crew Cab models are the 4 door models. The Rhino Rack Kayak Carrier part # S510 would then be a great option for carrying your kayak as well. It has a 99 lb capacity. Be sure to check the owners manual of your truck for the roof capacity.
  view full answer...
• Photo Of Fit Kit Clamps Appears To Be Shorter Than Clamps Used On Video Of 2016 Nissan Frontier
  I understand how the photos are a bit deceiving when looking at the brackets that are used to secure the roof rack to the door jambs. I have attached a couple of photos that show how the brackets look with the door on the vehicle open and also what it looks like when the door is closed. The clamps are actually shaped to fit the contour of the inside of the door jamb. The Rhino-Rack 2500 Series Vortex roof rack is a nice aerodynamic roof rack. The c-channels on the crossbars help reduce...
  view full answer...
  
• Will 59 Inch Rhino-Rack Vortex Aero Crossbars Fit on a 2016 Nissan Frontier Crew Cab without Rails
  Rhino-Rack recommends the 54 inch Vortex Aero Crossbars # RRVA137B-2 on your 2016 Nissan Frontier but that doesn't mean you can't go longer. The 59 inch, part # RRVA150B-2, will work and just be longer. You should check with your local laws to make sure you're not violating anything if they stick out too much. For your truck you'll also need the Legs # RRRLKVA and Fit Kit # DK108. I've included some videos for you as well.
  view full answer...
• Single Bar Roof Rack and Hitch T-Load for 2019 Nissan Frontier Crew Cab
  To do a single bar Rhino Rack roof rack for your 2019 Nissan Frontier you'd need the # RRVA137B, # RRRLKVAH, and the fit kit # DK108. Then for a hitch mounted T-Load you could use the # RTL002 and you'd be set. There isn't a way to do a single bar roof rack using the square bar Rhino Rack you mentioned.
  view full answer...
• Roof Rack Recommendation for a 2016 Nissan Frontier
  If you have a set of raised siderails on your 2016 Nissan Frontier you would want the part # MPG216 to complete a roof rack. If you have a naked roof you instead would want the part numbers # RRVA137B-2, # RRRLKVA, and # DK108.
  view full answer...
• Rhino-Rack Roof Rack and Roof Tray/Platform for a 2016 Nissan Frontier Crew Cab Naked Roof
  I spoke with my contact at Rhino-Rack and apparently the Pioneer trays do not attach to roof rack crossbars. They only attach to certain feet/leg kits. The set up for your 2016 Nissan Frontier is # JA8190 which requires attaching tracks to the roof. There is a Pioneer Platform, not a tray, that attaches to crossbars. It is # RR42115BF. For that you will need the following parts: Crossbars # RRVA137B-2 Leg kit # RRRLKVA Fit kit # DK108
  view full answer...
• Roof Rack and Cargo Box for 2017 Nissan Frontier Crew Cab Naked Roof
  Rhino Rack has a great roof rack that fits your 2017 Nissan Frontier Crew Cab with a naked roof with the part numbers # RRVA137B-2, # RRRLKVA, and # DK108. This is a higher quality aero bar roof rack that rivals Yakima and Thule roof racks in terms of quality but is offered at a lower price. For load stops when carrying lumber the part # S602 would be a great option and then for a cargo box something like the Thule Force XT part # TH6357B is easy to install and use as well as can carry...
  view full answer...
• How To Use Rhino-Rack Pioneer Platform Rack on a 2014 Nissan Frontier Crew Cab
  I have two great option for you to use the Rhino-Rack Pioneer Platform Rack on a 2014 Nissan Frontier Crew Cab, the first is our best option but it requires drilling. This will allow you it use the biggest size tray possibly, the Rhino-Rack Pioneer Platform Rack part # RR39QX. If you don't want to drill then you can use the Rhino-Rack Universal Pioneer Platform Rack part # RR42114BF you would also need the Rhino-Rack Vortex Aero Crossbar System part # RRVA137B-2, part # RRRLKVA, and part...
  view full answer...
• Will the Rhino-Rack Vortex Aero Crossbars Fit a 2012 Nissan Frontier Crew Cab
  Yes, the Rhino-Rack Vortex Aero Crossbars, # RRVA137B-2, will fit your 2012 Nissan Frontier Crew Cab with a bare roof. To mount the crossbars, you will need the 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK108. This roof rack has a weight capacity of 165 lbs, however, you will want to verify the weight capacity of your trucks roof before loading any cargo on the roof rack. The vehicles roof weight capacity is often lower than the roof racks weight capacity, so...
  view full answer...

Do you have a question about this Roof Rack?