Rhino-Rack Vortex Roof Rack for Tracks - Aluminum - Black - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Does Thule Motion XT Rooftop Cargo Box Fit Rhino Rack Roof Rack
  The Rhino Rack Vortex Crossbars # RRVA137B-2 you referenced measure 3-1/8" wide x 1-3/16" tall. The Thule Motion XT Rooftop Cargo Box # TH629806 will fit crossbars that are up to 3-1/2" wide and 1-11/16" tall so they will work on these bars! If you let me know the year, make and model of your vehicle I can confirm for you which Rhino Rack roof rack will fit and the parts you will need.
  view full answer...
• Roof Rack or Ladder Rack for Trailer For Roof Top Tent
  There are a couple options to add a rack system to your trailer, depending on what type of trailer you have. For an enclosed trailer with rain gutters you can install the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28. Another option is to use a track-mounted system from Rhino-Rack. You will need the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128, Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600 and crossbars,...
  view full answer...
• Recommended Roof Rack For 2015 Honda CR-V With Naked Roof
  We do have a roof rack that will work for your 2015 Honda CR-V. What we have found is that you cannot have factory side rails added to a vehicle after it has been delivered but we have a solution for you. I recommend the Rhino-Rack Vortex Roof Rack. This features anodized aluminum aerodynamic crossbars with a rubberized Vortex strip in the crossbar top channel to disrupt airflow for a quiet ride. Along with the crossbars the system uses the Series 2500 Legs that include locks to secure...
  view full answer...
• Roof Rack for a 2016/2017 Ford Edge Sport with Panoramic Glass Roof
  I would be happy to make some recommendations for you but I need to know the year of your Ford Edge Sport to select the proper products. Just let me know.
  view full answer...
• Roof Rack Recommendation for 2018 Land Rover Discovery Sport to Carry Basket and Bag
  Since your roof is glass I would recommend installing crossbars on your roof so that you can carry luggage. Could you get me the year of your Discovery so that I can see what you'd need for that?
  view full answer...
• Roof Rack Kit for a 2015 Ford Escape With a Naked Roof
  You have a lot of great options for a 2015 Ford Escape with a bare roof. I recommend the Rhino Rack Vortex kit, consisting of: Rhino Rack Vortex Aero Crossbars # RRVA137B-2 Rhino Rack 2500 Series Legs, part # RRRLKVA Rhino Rack Fit Kit 2500, part # DK375 These are a great balance of compatibility, ease of installation and value. Their aero shape is quieter than other crossbar designs and with the included T-Channel, can use some accessories with low profile channel mounts for better...
  view full answer...
• Recommended Roof Rack and Kayak Carriers for 2018 Nissan Frontier Crew Cab
  For your 2018 Nissan Frontier Crew Cab, I recommend the Rhino-Rack roof rack consisting of: Rhino-Rack Vortex Aero Crossbars -54" Long # RRVA137B-2 Rhino-Rack 2500 Series Legs # RRRLKVA Custom DK Fit Kit # DK108 Locking Endcaps for Vortex Aero Crossbars - Metal Cores # RRVA-LEC4 Then I recommend the Rhino-Rack J-Style Kayak Carrier # S510 and # RRS512X for your two kayaks. Finally you may want to consider the Rhino-Rack Universal Load Assist # RR-RUSL to help you safely load your kayaks.
  view full answer...
• Best Roof Rack for 2018 Ford Edge with Vista Roof
  There is absolutely an option for you! The best roof rack for your 2018 Ford Edge with the Vista glass roof is the Rhino-Rack RS 2500 Roof Rack because it gives your car a rack that is extremely functional while maintaining a clean, refined look. The Rhino-Rack RS 2500 made up of Vortex crossbars # RRVA137B-2, Leg kit # RRRLKVA, and Fit kit # DK432 uses aerodynamic bars to ensure you have a quiet ride. The rack's aero bars combine with the rubber vortex strips in their top channels to...
  view full answer...
  
• Is Rhino-Rack Roof Rack for 2018 Subaru Forester Secure to Use With Yakima SkyRise Tent
  The Rhino-Rack Locking Endcaps for Vortex Aero Crossbars - Metal Cores # RRVA-LEC4 are going to be what you need if you use any accessories that go into the channels of your roof rack crossbars; if you only use accessories that clamp around the bars then the metal cores would not be needed. In regards to the Rhino-Rack roof rack for your 2018 Subaru Forester, you mentioned you have the 59" Rhino-Rack Vortex Crossbars # RRVA150B-2, though that length may not work for your vehicle. The...
  view full answer...
  
• How to Transport a 90 lb Canoe on the Roof of a 2017 Dodge Durango
  I do have a solution for you but unfortunately there are no adapter kits available to carry your 38" wide canoe. You need to use a different roof rack system or use a canoe carrier. For a roof rack system I recommend the Rhino-Rack Vortex Aero Roof Rack which includes 54" crossbars # RRVA137B-2, the 2500 Series Legs # RRRLKVA, and the DK Fit Kit # DK299. This gives you longer crossbars that have a max weight capacity of 165 lbs. To carry your canoe just on the crossbars will also require...
  view full answer...
  
• Recommended Roof Rack For A 2017 Subaru Forester To Mount A Thule Tepui Rooftop Tent
  Hi Jacob, The Malone AirFlow2 Roof Rack # MPG215 would work capacity-wise for holding your Thule Tepui rooftop tent, but I've seen the connection between the feet and crossbar on these wear quickly enough that I personally would not use this crossbar for a tent. Once that connection wears down the crossbar can slide side to side on the feet as the weight shifts when making turns and there's no way to fix it. These are good for smaller applications and limited use. If you plan on using...
  view full answer...
• 2018 Jeep Grand Cherokee Altitude Roof Rack Recommendation
  I have a great roof rack solution that fits your 2018 Jeep Grand Cherokee that has black flush rails on the roof but Rola does not offer anything that fits your roof configuration. Instead you'd want the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK234 which is a confirmed fit and gives you a set of aero shaped crossbars that will minimize wind noise and are very easy to install.
  view full answer...
  
• Can Replacement Roof Rack be Added to 2018 Infiniti QX60 That Already Has Factory Roof Rack
  There are no aftermarket crossbars that will work on your 2018 Infiniti QX60 that already has a roof rack. The only way to add a roof rack is to have your entire factory roof rack assembly removed - the crossbars and rails - and convert your QX60's roof ro a naked roof. Only if you did that would you be able to utilize a roof rack, and there is one with 54 inch crossbars that would fit a 2018 Infiniti QX60 with a naked roof; the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2. To complete...
  view full answer...
  
• Best Value Roof Rack For 2017 BMW X5 With Flush-Mounted Rails For Cargo Box & Skis/Snowboards
  Thanks for the photo of your 2017 BMW X5, which shows it has flush-mounted rails, and roof rack that is the best value for your BMW is from Rhino-Rack. The reason why is that Rhino-Rack roof racks give you the same amount of quality as similar name brands, but at a more economical price. The parts that make up the rack for your '17 X5 are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack SRB Legs for Vortex Aero Crossbars - Flush Factory Side Rails # RRSX026 Those...
  view full answer...
  
• Best Roof Rack and Water Sport Carrier for 2 Kayaks or Paddle Boards on 2014 Ford Edge
  The combination you mentioned works great for your setup! On a 2014 Ford Edge without rails or crossbars, the Rhino-Rack Vortex Aero Crossbars, part # RRVA137B-2, is a highly-rated crossbar with a lot of versatility. They're aerodynamic and extend past the roof rack legs, giving even more space for mounting your accessories. They also have built-in C-channels for channel-mounting accessories. I've included a link to an installation video for you. Keep in mind that in order to use these...
  view full answer...
• Best Way to Transport 4 Kayaks on 2015 Chevy Traverse
  Without knowing the length of the crossbars and the weight of the kayaks, I would have some doubts that you're going to be able to carry 4 kayaks on the roof of a 2015 Chevy Traverse-but if you were going to do it the Thule Stacker # TH830 would be the way to go since they don't take up a ton of space. You're going to need roughly 50" (the Stacker takes up about 3" of bar space) of crossbar space to successfully do this. I would also recommend checking your owner's manual to find out the...
  view full answer...
• Recommended Roof Racks for a 2017 Chevrolet Traverse
  I am not sure what you mean by channels. The 2017 Chevrolet Traverse has two options of roofs: one with flush rails and the other with a naked roof. If you have the flush rails, I recommend the Rhino-Rack Vortex Aero Crossbars, part # RRVA137B-2. These are aero-style crossbars, so they are compatible with most accessories while cutting down on wind drag and noise. They're 54" long and have a weight capacity of 165 pounds. I've linked to a video review of these for you to look at. To attach...
  view full answer...
• What Roof Rack and Kayak Carrier Package is Recommended for a 2019 CRV?
  I recommend the Rhino rack package including the Vortex Aero Crossbars # RRVA137B-2, Rhino-Rack Legs for Vortex Aero Crossbars # RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack Roof Rack Legs # DK284. The Rhino-Rack is sturdy, has an attractive design to compliment your CRV, and the aero bar design reduces wind noise and is also a great value. If you want a premium rack option for a newer vehicle like your 2019 Model CRV, the Thule package Thule WingBar Evo Crossbars # TH711400, Evo...
  view full answer...
• Rhino-Rack Aero Bar Roof Rack for a 2014 Honda CR-V with Naked Roof
  Yes, Rhino-Rack roof rack # RRVA137B-2 will fit your 2014 Honda CR-V as long as it has a naked roof (no rails that run front to back or crossbars that run side to side). You will also need fit kit # DK284, and legs # RRRLKVA to install the roof rack. The bars are indeed 54 inches long overall.
  view full answer...
  
• Rhino-Rack Roof Rack Compatibility for 2019 Toyota Tacoma
  Your 2019 Toyota Tacoma Rhino-Rack system consists of: -Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # RRVA137B-2 -Rhino-Rack 2500 Series Legs # RRRLKVA -Custom DK Fit Kit # DK174 The 2008 Nissan Frontier system consists of the same crossbars and legs, so you will just need to get the new fit kit # DK174.
  view full answer...
• Correct Selection of Roof Rack Systems for a 2019 Mitsubishi Outlander Without Roof Rails
  That is correct. In our roof rack fit guide for your 2019 Mitsubishi Outlander you will choose the category "with no existing rails or crossbars" which I've linked for you to filter through. I recommend checking out one of the Rhino-Rack aero-style roof rack system. We have the ROC25 which has more of an OEM look as well as the Vortex crossbar system which has the overhang past each leg. Below is a list of the parts you'll need for either setup: ROC25 Kit - # RR65GR Vortex Aero 54" Crossbars...
  view full answer...
• Naked Roof Rack Recommendation for 2013 Honda CRV to Carry Longer Roof Box for Skis
  The naked roof racks that fit your 2013 Honda CR-V do put the front bar significantly closer to the windsheild like with the Rhino Rack part # RRVA137B-2, # RRRLKVA, and # DK284 we have installed on a 2013 CR-V so this would be the way to go. I attached a picture that shows the front bar is more than the amount of inches forward that you would need plus an install video on a similar 2014 CR-V as well.
  view full answer...
  
• Best Roof Rack Options for a 2016 Land Rover Discovery/LR4
  Absolutely! A Land Rover Discovery is referred to as the Land Rover LR4 here in North America. This is not to be confused with the Land Rover Discovery Sport which is an entirely different vehicle altogether. The Discovery/LR4 came with two different roof options which were a bare roof and roof with factory installed tracks. If you have the factory installed track system then you can use the Rhino-Rack Vortex Aero Crossbar System which is composed of the the crossbars part # RRVA137B-2,...
  view full answer...
• Roof Rack, Bike Rack And Kayak Carrier Recommendations For 2008 Scion xB
  If your 2008 Scion xB has no rails or crossbars I recommend the Rhino-Rack Vortex roof rack system. This roof rack features the low profile aerodynamic aluminum crossbars with the rubberized Vortex strips in the channel that help disrupt the airflow for a quieter ride. To order this roof rack you will need part # RRVA137B-2, part # RRRLKVA, and part # DK152. If you prefer Black crossbars you can order part # RRVA137B-2. The bike rack I recommend for this roof rack is the SQR Quick-Release...
  view full answer...
  
• Additional Feet and Crossbar For Rhino-Rack Heavy Duty Roof Rack on 2013 Land Rover LR4
  Hey John! We don't have a variation that comes with three but you can add an additional crossbar and feet to the # RR59QE. You will need the Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 54" Long # RB1375S along with the Track Mount RLTP Legs # RLTP. What do you plan on using the roof rack for?
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Rhino-Rack Pioneer Platform Recommendation for Sunseeker Awning on Leer Camper for 2019 Sierra 2500
  I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500. This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions: 43 Sq Ft - # RR32112 48 Sq Ft - # RR31101
  view full answer...
• 2008 4 Runner Sport Rhino Rack Roof Rack Options
  Hello Howard. If you're planning on removing your roof rack completely you will need to drill into your roof to install another type of rack. The Rhino-Rack RT Style Roof Tracks # RRRTS502F will give you a lot of options for roof racks once installed. You will need to get the # RLTP Legs and of course the bars of your choosing. You could get the Rhino Rack HD Bars # RB1650B-2 or a Pioneer Platform Rack # RR27AP. These will mount directly to the RLTP feet. If it were me, I would 100%...
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Are Rhino-Rack Adapters or Spacers Required for RLTP Legs to Bolt Onto a Pioneer Platform?
  I reached out to my contact at Rhino-Rack and there are no adapters or spacers required to use the Rhino-Rack Track Mount RLTP Legs for Factory Roof Rack Tracks - 2" Tall - Qty 2 # RLTPMV with the Pioneer platform. They said instead you may want to use a pioneer platform like # RR35TB and legs # RLTP (x2) which would work well with the roof tracks.
  view full answer...
  
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Fitting Larger Rhino Rack Pioneer Platform to Leer Topper with Thule Tracks
  You could use the Rhino Rack Pioneer Platform # RR35TB which is 60 by 49 inch and then for feet that would attach it to your Thule roof rack tracks all you'd need is two sets of the Rhino Rack RLTP Legs part # RLTP and you'd be set.
  view full answer...
• Can Rhino Rack Pioneer Platform Fit on Top of Truck Bed Camper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR75TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Will Thule AeroBlade Crossbars Fit Rhino-Rack RLTP Legs for a Range Rover Sport
  The Thule AeroBlade crossbars will not fit the Rhino-Rack RLTP legs, # RLTP. These legs are designed for Rhino-Rack heavy duty square bars. Also, different vehicles take different length bars so there is no guarantee that the length of the AeroBlade bars is sufficient for the Range Rover Sport. If you could tell me the year of your Range Rover Sport I could determine the length of the bars you would need and then you could get the appropriate Rhino-Rack feet and bars.
  view full answer...
• Rhino-Rack Pioneer Platform Cargo Carrier For Rails On Truck Topper
  The Quick Mount Leg Spacers for Rhino-Rack Pioneer Platforms - Qty 4 # RRQMPS10-4 are designed to be used with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600. You can then add a pioneer platform like # RR42115BF. If you want to forgo the pieces, the Rhino-Rack Pioneer Platform Rack - Track Mount - 60" Long x 49" Wide # RR35TB along with # RLTP (x 2) to mount the platform directly to the track rails. If your truck topper doesn't...
  view full answer...
• Parts Needed to Mount a Rhino Rack Pioneer Platform to a Truck Topper
  I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks.
  view full answer...
• Rhino Rack Roof Rack System for 1992 Chevy Suburban with Naked Roof
  Part # RRRTV208 works for your application. You need part # RLTP and part # RRVA137S-2. This is a universal roof rack system and most people don't like drilling into the roof. Personally I would go with part # 298-SX6000B for your Suburban. This is a universal system and can be used on other vehicles you might have.
  view full answer...
• How to Use the Rhino-Rack Pioneer Platform Rack on the Roof of a Truck Bed Topper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR35TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• Can I Install Heavy Duty Rhino-Rack Crossbars on a Pop Up Camper Roof
  To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 2 leg options that we...
  view full answer...
• Correct Rhino Rack RTC Style Track System For A 2016 Chevrolet Silverado 1500
  If you're wanting to put these tracks # RTC16 on your 2016 Chevrolet Silverado, you can get these legs # RLTP that will fit into the tracks. These will work with the Rhino Rack Heavy Duty Crossbars # RB1650B-2.
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...
• Additional Feet and Crossbar For Rhino-Rack Heavy Duty Roof Rack on 2013 Land Rover LR4
  Hey John! We don't have a variation that comes with three but you can add an additional crossbar and feet to the # RR59QE. You will need the Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 54" Long # RB1375S along with the Track Mount RLTP Legs # RLTP. What do you plan on using the roof rack for?
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Rhino-Rack Pioneer Platform Recommendation for Sunseeker Awning on Leer Camper for 2019 Sierra 2500
  I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500. This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions: 43 Sq Ft - # RR32112 48 Sq Ft - # RR31101
  view full answer...
• 2008 4 Runner Sport Rhino Rack Roof Rack Options
  Hello Howard. If you're planning on removing your roof rack completely you will need to drill into your roof to install another type of rack. The Rhino-Rack RT Style Roof Tracks # RRRTS502F will give you a lot of options for roof racks once installed. You will need to get the # RLTP Legs and of course the bars of your choosing. You could get the Rhino Rack HD Bars # RB1650B-2 or a Pioneer Platform Rack # RR27AP. These will mount directly to the RLTP feet. If it were me, I would 100%...
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Are Rhino-Rack Adapters or Spacers Required for RLTP Legs to Bolt Onto a Pioneer Platform?
  I reached out to my contact at Rhino-Rack and there are no adapters or spacers required to use the Rhino-Rack Track Mount RLTP Legs for Factory Roof Rack Tracks - 2" Tall - Qty 2 # RLTPMV with the Pioneer platform. They said instead you may want to use a pioneer platform like # RR35TB and legs # RLTP (x2) which would work well with the roof tracks.
  view full answer...
  
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Fitting Larger Rhino Rack Pioneer Platform to Leer Topper with Thule Tracks
  You could use the Rhino Rack Pioneer Platform # RR35TB which is 60 by 49 inch and then for feet that would attach it to your Thule roof rack tracks all you'd need is two sets of the Rhino Rack RLTP Legs part # RLTP and you'd be set.
  view full answer...
• Can Rhino Rack Pioneer Platform Fit on Top of Truck Bed Camper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR75TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Will Thule AeroBlade Crossbars Fit Rhino-Rack RLTP Legs for a Range Rover Sport
  The Thule AeroBlade crossbars will not fit the Rhino-Rack RLTP legs, # RLTP. These legs are designed for Rhino-Rack heavy duty square bars. Also, different vehicles take different length bars so there is no guarantee that the length of the AeroBlade bars is sufficient for the Range Rover Sport. If you could tell me the year of your Range Rover Sport I could determine the length of the bars you would need and then you could get the appropriate Rhino-Rack feet and bars.
  view full answer...
• Rhino-Rack Pioneer Platform Cargo Carrier For Rails On Truck Topper
  The Quick Mount Leg Spacers for Rhino-Rack Pioneer Platforms - Qty 4 # RRQMPS10-4 are designed to be used with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600. You can then add a pioneer platform like # RR42115BF. If you want to forgo the pieces, the Rhino-Rack Pioneer Platform Rack - Track Mount - 60" Long x 49" Wide # RR35TB along with # RLTP (x 2) to mount the platform directly to the track rails. If your truck topper doesn't...
  view full answer...
• Parts Needed to Mount a Rhino Rack Pioneer Platform to a Truck Topper
  I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks.
  view full answer...
• Rhino Rack Roof Rack System for 1992 Chevy Suburban with Naked Roof
  Part # RRRTV208 works for your application. You need part # RLTP and part # RRVA137S-2. This is a universal roof rack system and most people don't like drilling into the roof. Personally I would go with part # 298-SX6000B for your Suburban. This is a universal system and can be used on other vehicles you might have.
  view full answer...
• How to Use the Rhino-Rack Pioneer Platform Rack on the Roof of a Truck Bed Topper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR35TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• Can I Install Heavy Duty Rhino-Rack Crossbars on a Pop Up Camper Roof
  To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 2 leg options that we...
  view full answer...
• Correct Rhino Rack RTC Style Track System For A 2016 Chevrolet Silverado 1500
  If you're wanting to put these tracks # RTC16 on your 2016 Chevrolet Silverado, you can get these legs # RLTP that will fit into the tracks. These will work with the Rhino Rack Heavy Duty Crossbars # RB1650B-2.
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...
• Roof Rack for 2023 Jeep Wrangler Unlimited With Sky One-Touch Top
  For your 2023 Jeep Wrangler Unlimited we have the Rhino-Rack Vortex Aero roof rack. This has the additional clearance needed to still allow you to use your Sky One-Touch top with the crossbars in place. To complete the roof rack you will need the following: -Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 -Rhino-Rack Roof Rack Legs # RL210S2 (Two of these) -RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 I have attached a review video which shows how your automatic...
  view full answer...
• Can I Fit the Rhino-Rack RTC Tracks # RTC16 on My 2022 Kia Telluride with Naked Roof?
  If you are looking for a permanent solution to mount to your 2022 Kia Telluride, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long # RTC16 is a viable solution. We have had neighbors who report that these tracks do flex to fit the contours of their roofs/camper shells. With that factor, you should be fine with mounting the tracks to your 2-inch channel. Also, since the # RTC16 measures 2 inches wide, they will fit the width. To complete this system, I recommend the following...
  view full answer...
  
• How to Add Rhino-Rack Pioneer Platform to Rhino-Rack Roof Rack on 2022 Jeep Wrangler 4xe
  You can easily add a Rhino-Rack Pioneer Platform to the Rhino-Rack Vortex Aero Crossbars # RRVA150S-2 or # RRVA150B-2 on your Jeep Wrangler 4xe. All you need is the Pioneer that mounts directly to crossbars, which is the following: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The # RR42115BF mounts to your Rhino-Rack crossbars with the included clamps, or directly into the channels of your crossbars with the included channel-mounted hardware.
  view full answer...
• Recommended Roof Rack for 2023 Jeep Wrangler 4xe To Carry Kayaks Above Sky One Touch Soft Top Roof
  For your 2023 Jeep Wrangler 4xe with the Sky One Touch soft top I recommend using the Rhino-Rack Vortex roof rack. For this you will need the Crossbars # RRVA150B-2, Legs # RL210S2 and Adapters # RRVA-FK1-2. I have included an image below on how this rack will look with your particular roof opening. Do understand this image shows their square bars and not the Aero bars I listed above. I recommend using the Thule Hullavator Pro Kayak Roof Rack # TH898 as this allows you to lower the mounts...
  view full answer...
  
• Rhino-Rack Roof Rack Fitment with Sky One Touch Roof on a 2021 Jeep Wrangler Unlimited
  Yes, you can use the Rhino-Rack SG Roof Rack for Rain Gutters # RRSG59 with the Sky One Touch roof on your 2021 Jeep Wrangler Unlimited as long as you don't open up the roof with the roof rack installed. If you wanted an option with enough clearance that you don't have to worry about it making contact with the Sky One Touch then we have that as well with the following parts: 59" Vortex Aero Crossbars - # RRVA150B-2 Gutter Mount Legs - # RL210S2 Fit Kit - # RRVA-FK1-2 Attached are review...
  view full answer...
• Recommended Cargo Box for Roof Rack with 42 Inch Crossbar Spread
  I have a solution for you, but you're not going to be able to use the # TH27PQ to accomplish this. You'll need to find a cargo box that can be used on roof rack systems with a 42" crossbar spread and the only option we have for that is the Yakima SkyBox 21 # Y07337 -which has a maximum allowable crossbar spread of 42" and will mount to round, square, aero, elliptical, and most factory crossbars (maximum dimensions of 3-1/2" x 1-11/16"). The Yakima SkyBox does come equipped with locks for...
  view full answer...
• Recommended Roof Rack for a Hullavator on a 2019 Jeep Wrangler Hard Top
  Yes, there is a Thule roof rack that will accommodate a Thule Hullavator but you will need one with longer crossbars. The Thule Hullavator item # TH898 requires crossbars that extend 4" - 8" past the legs to allow the lift assist function to work. You will need the following parts: Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 item # TH713600 Rapid Gutter Feet for Thule Crossbars - Rain Gutters - 5" Tall - Qty 4 item # TH65BJ This system is compatible with the Thule Hullavator...
  view full answer...
• Recommended Roof Rack for a 2021 Jeep Gladiator Using a Hullavator
  Yes, we do. To carry the Thule Hullavator item # TH898 on your 2021 Jeep Gladiator Sport, I recommend the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 item # RRVA180B-2 RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Track Mount - Qty 4 item # RRVA-FK1-2 Rhino-Rack Roof Rack Legs - Gutter Mount - 4-5/16" Tall - Qty 4 item # RRRL110S5-2 These crossbars are 12" longer than the item # RRVA150B-2...
  view full answer...
• Which Rhino-Rack Roof Rack Will Mount To The Gutters On My 2021 Jeep Wrangler?
  I have a solution for you, but the Rhino Rack Track Mounted Roof Rack 54" # Y02-480B-NT that you were looking into is actually for roof tracks, not roof gutters. Also, the 54" crossbars are not the recommended setup according to Rhino-Rack. For your 2021 Jeep Wrangler you will want to go with Rhino-Rack Vortex Aero Crossbars Black - 59" Long # RRVA150B-2, Adapters # RRVA-FK1-2, and Gutter Mount Legs # RRRL110S5-2. Another option is to go with the flush-mount system: Rhino-Rack SG Roof...
  view full answer...
• Comparing Rhino-Rack Vortex Aero and Heavy-Duty Crossbars for a 2023 Jeer Wrangler
  I recommend using aero style crossbars on a 2023 Jeer Wrangler. The Rhino-Rack Vortex Aero Crossbar System part # RRVA150B-2, part # RRVA-FK1-2, and part # RRRL110S5-2 in particular. The aero style bars are most versatile with rooftop accessories and they will be the quietest. They can also be used for lumber but for this I do also recommend the Load Stops for Rhino-Rack Vortex Aero Crossbars part # RRRLH2. I don't recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars since they don't...
  view full answer...
• Roof Rack for 2022 Jeep Wrangler Unlimited for Roof Top Tent
  All of the roof racks we offer for your 2022 Jeep Wrangler Unlimited with the sky top roof have a 100 lb dynamic (when in use on highway) roof capacity including the Yakima Round Bar Rack # Y00409 and # Y00101 as well as the Rhino Rack roof rack part # RRVA150S-2, # RL210S2, and # RRVA-FK1-2. In general I prefer the Rhino Rack as you get a higher quality roof rack that has aero shaped bars which do better with wind noise as a better price than the similar quality racks that cost a lot more.
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Roof Rack and Cargo Carrier for 2017 Winnebago Travato on Ram ProMaster 3500 Chassis
  Does your 2017 Winnebago Travato on a Ram ProMaster 3500 chassis already have a roof rack? If not Rhino Rack has an option that is a fit for this chassis which consists of Crossbars # RRVA180B-2, RLTP Legs for Factory Fixed Mounting Points # RRRLTPFD and RLTP Leg Adapters # RRVA-FK1-2. If the solar panel on your Winnie is in the middle of the rig and can potentially interfere with installing this roof rack another option to consider is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B...
  view full answer...
• How to Reduce Wind Noise for Rhino-Rack Vortex Roof Rack on 2021 Jeep Wrangler
  I think your issue is twofold; you are using the taller 8-1/4" Tall Legs # RL210S2, and you aren't using the RLTP Leg Adapters # RRVA-FK1-2 (according to what was on your order with us.) The correct parts for the gutter mount roof rack for your 2021 Jeep Wrangler includes the following: 59" Vortex Aero Crossbars - # RRVA150B-2 RLTP Leg Adapters - # RRVA-FK1-2 4-5/16" Tall Gutter Mount Legs - # RRRL110S5-2 Normally I would say you can just add a fiairng to help direct the wind over your...
  view full answer...
• How to Add Awning to 2022 Jeep Wrangler Unlimited With Sky One-Touch Top
  So you can definitely add an awning to your 2022 Jeep Wrangler Unlimited with the Sky One-Touch top, but not with the direct-mount Hideaway; you'd need to add a roof rack and then an awning that attaches to the crossbars of the rack. So first, for the roof rack, here is what you'd need: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA150S-2 or Black # RRVA150B-2 - Rhino-Rack Roof Rack Legs - Gutter Mount # RL210S2 - RLTP Leg Adapters # RRVA-FK1-2 You will still be able to open the...
  view full answer...
• Roof Rack That Fits A 2018 Ram ProMaster 1500
  I took a look at the picture you're referencing and it appears to be similar to the Rhino-Rack RTC-Style Roof Rack Tracks # RTC18 with the RLTP Legs # RRRLTPFD. I do have have a solution, however the roof rack mentioned above with the feet will not fit your ProMaster. If you're still wanting a roof rack, the Rhino Rack Vortex Aero Crossbars # RRVA180B-2, with the legs # RRRLTPFD, and the leg adapters # RRVA-FK1-2 is confirmed to fit your vehicle, and has a maximum weight capacity of 165-lbs.
  view full answer...
  
• Will A Gutter Mounted Rhino-Rack Roof Rack Clear A 2023 Jeep Wrangler Sky Top
  Hi Nathan, The Rhino-Rack Roof Rack Legs # RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up 4-5/16" from the lip of the gutter and see if the sky top sticks up enough to catch where the crossbar would sit. If you haven't had crossbars on any of your vehicles with the roof open then I do want to note that the wind hitting the crossbars is annoying loud...
  view full answer...
• Rhino-Rack Roof Rack for a 2017 Chevrolet Express Van to Mount Solar Panels
  I would not recommend going with the Rhino-Rack Roof Rack Legs # RRRL110S5-2 over the # RRRL150GMC-2. While both are gutter mount options, the # RRRL150GMC-2 have been confirmed to fit and provide the proper roof clearance for adding crossbars to your 2017 Chevrolet Express Van. As for the crossbars themselves, they are an "overhang" style. So if the roof of your van is only 59", then you can use the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 (59" black) or # RRVA150S-2 (59" silver)....
  view full answer...
• Roof Rack for 2023 Jeep Wrangler 4xe with Sky One-Touch Roof
  The Rhino-Rack Vortex Aero Crossbars part # RRVA150B-2 will work great on a 2023 Jeep Wrangler 4xe with Sky One-Touch Roof when combined with the Rhino-Rack Roof Rack Legs part # RL210S2 and RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars part # RRVA-FK1-2. In regards to security, there aren't traditional locks for the mounting feet but they will require a security tool for install and removal which is not something everyone has therefore there is actually built-in security. There...
  view full answer...
• What Is The Weight Capacity Of The Rhino Rack Gutter Mount System On A 2022 Jeep Wrangler Unlimited?
  Installing a Rhino Rack gutter mount roof rack system on your 2022 Jeep Wrangler Unlimited will give you 88 pounds of carrying capacity. The Vortex Aero Crossbars # RRVA150B-2 will give you 59" of usable space as well. To complete this set up, you will need the Rack Legs - Gutter Mount - 4-5/16" Tall # RRRL110S5-2 and RLTP Leg Adapters # RRVA-FK1-2 to attach the bars. Just as a side note, if you have the Sky One-Touch Power Top, we have found that the Gutter Mount - 8-1/4" Tall # RL210DS8...
  view full answer...
• Picture and Video of Rhino Rack Roof Rack Installed on 2017 Ford Transit T150
  The Rola roof rack you mentioned is not a fit for your 2017 Ford Transit T150 which means it wouldn't work on your vehicle and we definitely don't have pictures of it installed. The most similar roof rack we have for your 2017 Ford Transit T150 is the Rhino Rack roof rack part numbers # RRVA180S-2, # RRRLTPFC-2, and # RRVA-FK1-2 which we had the chance to install on a similar T150 as yours. I attached an install video as well as an install picture for you to check out as well. When the...
  view full answer...
  
• Rhino-Rack Roof Rack Gutter Mount Fit For 2021 Jeep Wrangler Sky One-Touch Roof
  I checked with Rhino-Rack for you in order to confirm the correct parts you will need for your 2021 Jeep Wrangler with the Sky One-Touch roof, and what you will need are gutter mounts that are 11 inches high. With that height you will be able to utilize your Jeep's Sky One-Touch without interference from the rack. The parts that you will need are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 - RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 - Rhino-Rack...
  view full answer...
• Roof Rack Recommendation for 2019 Wrangler Rubicon Unlimited with the Black Hard Top
  The vacuum cups of the SeaSucker roof rack part # 298-SX6000B that you referenced are 6 inches in diameter so based on the picture you sent in the ridges would interfere with this kit installing. So you'd have to go with a roof rack that uses a universal style gutter-mount like the Rhino-Rack Vortex Aero Kit part # RRVA150B-2, # RRVA-FK1-2, and # RRRL110S5-2 which is a confirmed fit.
  view full answer...
  
• What Crossbar System Fits My 2021 Jeep Wrangler with a OneTouch Skytop Roof?
  For a roof rack system that fits on your 2021 Jeep Wrangler with a OneTouch Skytop roof, you need gutter mounts that are 11 inches high. With that height you will be able to utilize your Jeep's Sky One-Touch without interference from the rack. For a great rack that has 11-inch gutter mounts, I recommend the following parts: - Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 - RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 - Rhino-Rack Roof Rack Legs - Gutter Mount - 11"...
  view full answer...
• What are Dimensions of Replacement M8 x 16.5 mm Stainless Steel Rectangular T-Bolt
  The rectangular bolt head of RR72XB is 1 13/16" long x 7/8" tall x 1/8" thick. The type of track nuts that would fit into the # RTS507 would be the part # RRQMFK11 though. The # RR72XB is for fitting into the top channel of the crossbars.
  view full answer...
• Adding Rhino Rack Tracks to a 2017 Ford F-150 with Camper Shell
  The Yakima Tracks part # Y01126 and Rhino Rack Tracks part # RTS507 and very similar so you can use their mounting feet on each other's rails. In order to use a Rhino Rack Crossbar System with the Yakima Tracks, I recommend the Rhino-Rack Quick Mount Legs part # RRRLT600 with the Rhino-Rack Vortex Aero Crossbars part # RRVA150B-2. For your 2017 Ford F-150, I recommend the Rhino-Rack Vortex Aero Crossbar System which is composed of part # RRVA150B-2, part # RRRLKVA, and part # DK427. This...
  view full answer...
• Recommendation for Bolt on Roof Rack System for 2008 Ford Ranger
  Rhino Rack offers the RT-Style Roof Rack Track that would mount directly to the roof of your 2008 Ford Ranger with pop rivets. You will need a rivet gun to install this track so if you do not have one already, you could purchase one from a local hardware or auto parts store. We offer the # RTS507 which is our shortest RT track and it measures 43-1/2 inches long. These tracks are offered in different lengths and can be cut if necessary. You will want to measure the roof of your Ranger...
  view full answer...

Do you have a question about this Roof Rack?