See what our Experts say about this Inno Roof Rack

• Roof Rack for 2022 Chevy Traverse with Naked Roof
  For your 2022 Chevy Traverse that has a naked roof we have the Inno roof rack part numbers # INXB123-2, # INXS200, and # IN63FR which would work great. It clamps around the door frame so it's pretty easy to install and remove as well. It would be great for a temporary install or to be left on for a decent amount of time. The bars are aero shaped too which means there would be minimized wind noise.
  view full answer...
• Recommended Roof Rack And Cargo Box For 2020 Ford Explorer ST With Factory Roof Rails
  The Inno Aero Crossbars - Aluminum - Black - 48" Long # INXB123-2 with Inno Flush Feet # INXS100 that you mentioned are confirmed to fit the roof of your 2020 Ford Explorer ST with factory raised rails running front to back. These crossbars meet the requirements for the Yakima CBX Rooftop Cargo Box - 18 Cubic Ft - Black # Y86FR so it will be a nice setup for you. The cargo box will simply clamp around the crossbars with the included clamps. This is a very nice box which has an integrated...
  view full answer...
• Can I use Inno Aero Crossbars on Thule Towers?
  I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa. When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower...
  view full answer...
• Using a Yakima SkyBox 16 on a 2013 Ford Explorer
  I have a solution for you, but the Yakima Skybox NX 16, part # Y95AV won't fit the factory crossbars on the 2013 Ford Explorer. The factory bars are too far apart when installed, and a little too wide to use safely with the Skybox NX 16. You'll want to go aftermarket and pick a rack that is quickly removed when not in use (And secure when it is) so you can remove them and avoid the "Double crossbar" look on the vehicle. I recommend Inno's FlushBar system, consisting of: Flush Bar Foot...
  view full answer...
• What Roof Rack Works with My 2004 Honda Accord Sedan to Use the Inno Locker # INXA445?
  I have a great crossbar solution for you to use the Inno Locker # INXA445! For your 2004 Honda Accord 4-door with a naked roof, the Inno Locker will attaches as long as you have aero crossbars that have top channels that extend the length of the crossbar. For 100% definite compatibility with the Inner Locker on your roof, I recommend the following crossbar setup: - Inno Aero Crossbars - Aluminum - Black - 48" Long # INXB123-2 - Inno Through Feet for Aero Crossbars - Naked Roofs # INXS250 -...
  view full answer...
• Roof Rack And Tent Combo For 2000 Honda CR-V
  If you're wanting to get the Inno roof rack system on your 2000 Honda CR-V, you will need the Inno Aero Crossbars # INXB123-2, Inno Through Feet # INXS250 and the custom Fit Kit # INK146. These have a dynamic weight capacity of 165 lbs. This Yakima SkyRise Tent # Y07437 requires a minimum of 165 lbs of dynamic weight capacity. Dynamic is the weight in motion and static is the weight when sitting still. So you will be good to put a Yakima tent on top.
  view full answer...
• Will Inno Gravity Ski and Snowboard Carrier with Channel Mount fit a 2014 Subaru Forester?
  The Inno Gravity Ski and Snowboard Carrier will fit on your 2014 Subaru Forester if you have aftermarket crossbars. The OEM crossbars did not have the top channel so if you have those bars I recommend the Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 6 Fat Skis or 4 Boards # INA951 for a similar rack. If you don't already have crossbars, I recommend the following options that will be compatible with the Inno Gravity carrier: If you have the factory side rails that run...
  view full answer...
  
• Best Roof Rack for 2006 Range Rover HSE
  A great all around roof rack for your 2006 Range Rover HSE with no overhang is the Inno Aero Roof Rack system with part numbers # INXB123-2, # INXS200, # INK263. I recommend this over the other roof racks that fit your vehicle because this system uses 48" crossbars # INXB123-2 compared to the other longer 60" crossbars. If you need more space, then get a roof rack with longer bars, but if your priority is a low-profile and sleek look, then the Inno Rack is ideal. The Inno Aero Crossbars...
  view full answer...
• What Kayak Rack will Work with My Tonneau Cover on My 2022 Ford Maverick?
  I have a great kayak carrier solution for you that works with your trifold tonneau cover. Unfortunately, I confirmed with our ladder rack manufacturers that we currently do not have a fitment of a ladder rack that will allow you to simultaneously install the rack with the cover installed. However, we do have a great roof rack option that allows you to transport your kayaks on the roof of your 2022 Ford Maverick to allow you to have a fully-functional tonneau cover. For that route, I recommend...
  view full answer...
• Recommended Roof Rack Crossbar Options for 2017 Chevy Equinox With Factory Roof Side Rails
  We can't have the family going hungry! Yakima and Thule do make a high quality product, but they do get every penny for it. Another brand name you might not be so familiar with is Inno. They are very well known on the west coast, but not necessarily in the rest of the country. Inno offers high quality roof roof rack components at a lower price than their main competitors. I'd recommend the Inno Aero Crossbar system, which would consist of the following parts: Inno Aero Crossbars, in black...
  view full answer...
• What Roof Rack Fits Both My 2011 Volkswagen Jetta and My 2007 Toyota Matrix?
  I have a great solution for you. While we don't have a complete interchangeable roof rack that fits both your 2011 Volkswagen Jetta (bare roof) and your 2007 Toyota Matrix (bare roof), we do have a system that can use the exact same crossbars and mounting feet. The only difference between the two sets of roof racks are the fit kit that connects the feet to the roof of the vehicles. The difference parts are needed because fit kits are designed for specifically to fit the contours of roofs...
  view full answer...
• Tent Rooftop Rack For 2015 Scion xB
  Rhino Rack does not make a Pioneer Platform for the 2015 Scion xB. Yakima makes a similar 55" long x 49" wide platform, but the weight limit is 165 pounds, well under your needs. It also requires a fit kit that is not compatible with the Scion roof. Further, you will need to check your owners manual for your vehicles roof weight limit. I suspect it is below well below 165 as well. The only similar thing we offer is the Inno Roof Rack that supports 120 pounds – the most of all the Scion...
  view full answer...
• DK Fit Kit for Rhino-Rack 2500 Series Legs on a 2004 Toyota Matrix
  The correct fit kit for installing the Rhino-Rack 2500 Series Legs # RRRLKVA (for crossbars like # RRVA126B-2) to your 2004 Toyota Matrix is part DK062. This has been discontinued though so if you aren't able to find it somewhere like on a marketplace then I recommend going with the Inno roof rack instead since it's similar to Rhino-Rack both in price and in quality. Here are the parts you'll need for your Matrix: - 48" Crossbars # INXB123-2 - Through Feet # INXS250 - Fit Kit # INK501
  view full answer...
• Measuring the Front and Rear Bar Stay Dimensions for Inno Roof Rack on 2009 Scion xB
  I have the exact measurements to fit the Inno Roof Rack with part numbers # INXB153-2 (or # INXB123-2), # INXS250 ( or # INXS200), and # INK300 on your 2009 Scion xB. It sounds like the confusion comes from how there are different install instructions for the different parts and they must be used simultaneously. What will help you out here is the install guide for your fit kit # INK300. These are the clamps and pads that were designed specifically for your 2009 Scion xB. What you're looking...
  view full answer...
• Will the Inno Feet # INXS150 Work with my Inno Aero Crossbars # INXB123-2 on My Honda Pilot?
  Yes, the Inno Through Feet for Aero Crossbars # INXS150 will work with the Inno Aero Crossbars - Aluminum - Black - 48" Long - Qty 2 # INXB123-2 on your 2008 Honda Pilot.
  view full answer...
• Inno Roof Rack Fit for a 2020 Infiniti QX80
  The Inno Roof Rack consisting of the # INXB123-2 48 inch crossbars and the # INXS100 flush roof rack feet would be a fine choice for your 2020 Infiniti QX80, and is a confirmed fit per Inno. The Inno Aero Crossbars measure 3-1/8 inch wide by 1-1/8 inch tall and the Rhino-Rack # RMCB is compatible with crossbars up to 3-1/2 inches in width and 1-1/2 inches tall, so they'll work just find together. I've linked to a demonstration video showing the features of the Inno Aero flush roof rack.
  view full answer...
• Inno Roof Rack Recommendation for 2016 Honda HR-V with Factory Flush Rails
  For your 2016 Honda HR-V with factory flush rails the Inno fit kit part # INTR159 can be used but you need to use the Inno roof rack components part numbers # INXS450 and # INXB123-2. This will attach through the factory fixed mounting points of your roof and does not clamp around the door frame. It can't be used with Honda brand crossbars.
  view full answer...
• Confirmed Roof Rack Fits for 2012 Infiniti QX56 with Raised Roof Side Rails
  We have already done the work for you! If you click on the page link provided you will see all aftermarket roof rack products confirmed for your 2012 Infiniti QX56 that has raised roof side rails that run front-to-back. These various roof racks have crossbar lengths that vary considerably, from 48-inches as with the Inno Aero rack made of parts # INXB123-2 and # INXS100, up to 65-inches as with the Malone Universal Rack # MPG203. The choice depends on your budget, preferred appearance...
  view full answer...
• Will the SportRack Vista Cargo Basket Mount to Inno Aero Crossbars
  The SportRack Vista Roof Mounted Cargo Basket # SR9035 will fit the Inno Aero Crossbars # INXB123-2 (you will also need the Inno Flush Feet for Aero Crossbars # INXS100 to mount these to your 2021 Ford Explorer). The SportRack Vista Roof Mounted Cargo Basket # SR9035 will fit crossbars up to 3-1/2" wide and the Inno Aero Crossbars # INXB123-2 are 3-1/8" wide, so you are good to go.
  view full answer...
• Roof Rack Recommendation for 2000 Honda Civic Sedan
  We have roof racks that are a fit for your 2000 Honda Civic sedan but Sportrack does not have any fits for the sedan models of your vehicle. Also worth mentioning is that the Sportrack roof racks don't generally fit well so we try not to recommend them since they are only a semi-custom fit and not a full custom fit. Instead the Inno roof rack part # INXB123-2, # INXS250, # INK707 would be your best option. This the best priced option that fits your vehicle, it's a custom fit rack so it...
  view full answer...
• Inno Roof Rack that Is Guaranteed to fit 2008 Mazda RX-8 Roof
  Inno test fit their roof rack part numbers # INXB123-2, # INXS250, and # INK163 on a 2008 Mazda RX-8 just like yours and they determined it fit well. While we haven't had the chance to test the fit we can guarantee it will fit your vehicle and work great! I attached a link to this page for our return policy but you wouldn't need to worry.
  view full answer...
• Roof Rack for a 2014 Mini Countryman S R60 to Use Clamp on and Channel Mounted Accessories
  I can definitely help you out in finding the best roof rack option for your 2014 Mini Countryman S R60. Any of the below options will allow you to use your Inno box and Yakima bike/kayak accessories. 2014 Mini Countryman Roof Rack by Inno - Inno Aero Crossbars # INXB123-2 - Inno Through Feet for Aero Crossbars # INXS450 - Custom Fit Kit for Inno # INTR142 2014 Mini Countryman Roof Rack by Thule - Thule WingBar Edge Crossbars # TH96FE - Edge Flush Rail Feet for Thule Edge Crossbars #...
  view full answer...
• Recommended Crossbars for a 2003 Toyota RAV4
  Yes, for your 2003 Toyota RAV4 I'd recommend checking out the Inno Aero Crossbars # INXB115-2, with the Inno Through Feet for Aero Crossbars # INXS250, and the Custom Fit Kit # INK244. These crossbars measure 45" long, 3 1/8" wide, 1 1/8" tall, and have a maximum dynamic weight capacity of 165 lbs. This system is designed to be used with a naked roof, which is what I assume you have but If you have factory rails already then you'd want the Inno Aero Crossbars # INXB123-2 with the feet...
  view full answer...
• Roof Rack Confirmed to Fit a 2010 Ford Explorer with Raised Factory Side Rails
  The Thule AeroBlade Edge Roof Rack 7501B is not a confirmed fit for your 2010 Ford Explorer. For a compatible roof rack on your 2010 Ford Explorer with raised rails, you can use the 2010 Ford Explorer Roof Rack by Inno which consists of the: - Inno Aero Crossbars # INXB123-2 - Inno Through Feet for Aero Crossbars # INXS150
  view full answer...
• Looking For Replacement Base Pads For The Inno Flush Feet INXS300
  Hello Christoph, thanks for reaching out. It sounds like you are looking to replace the base pads from the Inno Flush Feet # INXS300. I am sorry to say that we do not offer this part separately. You may want to try reaching out directly to Inno to see if they can provide one, otherwise the only solution I can offer you is to get a whole new set of feet since they come with the base pads.
  view full answer...
• How to Carry 2 Kayaks and a Canoe With 2000 Chevy Suburban
  To carry a pair of kayaks and that large of a canoe with your 2000 Chevy Suburban you are going to need a roof rack and trailer. The roof rack that will work for your vehicle depends on if it has the factory installed raised rails that run front to back or the factory installed tracks, and please be sure to look in your owner's manual to determine if your roof can handle the weight capacity of your canoe. If your Suburban has the raised side rails and is NOT the Z71 model, the roof rack...
  view full answer...
• Recommended Roof Rack System for a Yakima SkyRise HD Tent on my 2016 Lexus GX 460
  I recommend using a rack system like the Inno system which consist the Inno Aero Crossbars part # INXB93-100, the Inno Flush Feet for Aero Crossbars part # INXS300 and the Custom Fit Kit for Inno Roof Rack Feet part # INTR152. The reason we can use tents like the Yakima SkyRise HD Tent for Roof Rack Crossbars part # Y07436 is because the weight ratings are for a moving load when the vehicle is parked they rate the rack a bit higher allowing us to get up to the capacity of the tent. The...
  view full answer...
• What Roof Rack Should I Buy for My 2021 Toyota RAV 4 with Flush Factory Rails?
  For a great economical Inno rack that is compatible with your 2021 Toyota RAV4, has an aerodynamic design that lessens wind noise, includes an easy installation, and has locks, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 39" Long and 42" Long - Qty 2 # INXB100-108 - Inno Flush Feet for Aero Crossbars - Fixed Mounting Points - Qty 4 # INXS300 - Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR I went ahead and attached...
  view full answer...
• Low Profile Roof Rack For 2004 Yukon Denali
  The Carr Low-Profile Light Mounting Bar # CARR210501 will not fit. But I have something that will! If you have factory installed raised rails on your 2004 Yukon Denali the lowest profile crossbars would be the Yakima FlushBar Crossbars # Y00444-2 and you'll need this custom fit kit # Y00158. If you don't have raised rails the lowest profile option would be the Inno Aero Crossbars # INXB115-2 with the flush feet # INXS300 and the custom fit kit # INTR501. We don't have a roof rack that...
  view full answer...
• Aluminum Roof Rack for Carrying Surfboards on 2018 Subaru Forester
  We can offer you aluminum bar aero roof racks for your 2018 Subaru Forester for both of its possible roof setups, either raised side rails or a bare roof without fixtures. All appear on the linked page where you can click on the roof type you have to then see only the options that work with that specific roof configuration. Do please note that while the crossbars are all-aluminum there are still some steel components in the foot assemblies because that stronger material is essential in...
  view full answer...
• Roof Rack Recommendation for 2014 Subaru Impreza with Naked Roof
  For your 2014 Subaru Impreza wagon there are no roof rack options that will attach with a factory fixed point style attachment as that's not a current option for your vehicle. My solution for you will work as long as you do not have the WRX model. Since your vehicle has a naked roof, you'd need to use a roof rack that uses clamps to attach to the door frame. For that you'd want the INNO part # INXB100-108, # INXS300, and # INTR145.
  view full answer...
• 2014 Subaru Forester Roof Rack Recommendation
  To complete a roof rack on your 2014 Subaru Forester all you would need are the components that you referenced: Inno Aero Crossbars # INXB100-2 Inno Stays for Multi Systems # INXS300 Inno Fit Kit Hooks # INTR145
  view full answer...
• Recommended Inno Roof Rack on a 2017 Subaru Forester w/o Factory Side Rails
  For your 2017 Subaru Forester without the factory side rails, I recommend the Inno Aero Crossbars # INXB100-2, the Inno Flush Feet # INXS300, and the Custom Fit Kit # INTR145. This roof rack has a low-profile design and along with the elliptical crossbar design makes the Inno rack aerodynamic. The aerodynamic design will cut down on wind drag and noise will the vehicle is in transit.
  view full answer...
• Roof Rack and Cargo Basket for 2016 Lexus GX 460 to Carry Cargo Bag
  Your best solution is going to be to install a roof rack on your 2016 Lexus GX 460 like the Inno part numbers # INXB93-100, # INXS300, and # INTR152 so that you can then mount a basket to the bars like the Thule Canyon XT # TH859XT and easily carry your cargo bag.
  view full answer...

Do you have a question about this Roof Rack?