See what our Experts say about this Inno Roof Rack

• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• Do the Inno Square Crossbars fit the Thule Pass Through Foot Packs
  Yes the Inno Square Crossbars part # INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part # TH450. As you know they are a pass through style bar so you have the option of using any length cross bar you would like. I generally stay inside the vehicle mirrors because it gives you a good reference point of how wide they are on the rooftop.
  view full answer...
• Replacement Square Bar Solution for Older Thule Square Bar Roof Rack
  The older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the # INB137 for a set that is 54 inches long. The new Thule square bars attach to the feet with a track on the bottom side of the bars instead of the feet grabbing around the bars.
  view full answer...
• Can I use Inno Aero Crossbars on Thule Towers?
  I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa. When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower...
  view full answer...
• FIt and Compatibility of Inno Roof Rack on a 2014 Ford Fusion
  The front feet should sit flush just like the back feet do on your 2014 Fusion. The first thing to check is that you received the correct pad kit for your vehicle. After that you will want to check the orientation of the rubber pad into the foot of the carrier, I have linked an image of how to tell if this is installed properly for you to better see. Finally you will want to consult the mounting position measurements that were included with the mounting hooks. I have also linked these...
  view full answer...
  
• What are the Dimensions of the Thule Square Bars
  I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like # INB137.
  view full answer...
• Square Crossbars Compatible with Older Thule Crossroad 450 Feet
  The old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the older 450 feet so we need to look to a different manufacturer. We have actually found that the Inno Square Crossbars have the same dimensions as the older Thule crossbars so they will be compatible with the older Thule feet like what you have. I have...
  view full answer...
• Will the Thule Hullavator Pro Kayak Carrier Work W/ Inno Square Crossbars?
  I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898 is compatible with both the Inno Crossbars # INB137 you were looking at as well as your Thule crossbars that have the channel down the middle. Since you already have crossbars you don't need to use the Inno bars . The only reason you'd need to swap your bars out would be if you don't have 4"-8" of overhang past your...
  view full answer...
• Roof Rack Recommendation for 2018 Hyundai Tucson to Carry Thule Hullavator
  To install a Thule Hullavator on your 2018 Hyundai Tucson with a naked roof (thanks for picture), you will first need to install a roof rack. For that you'd want the Inno Square bar roof rack part numbers # INB137, # INSUT, and # INK680 which is a confirmed fit and will give you bars that the Hullavator can attach to.
  view full answer...
  
• Solutions for Carrying Spare Tire on 2009 Toyota RAV4 Sport
  From what I understand, the 2009 RAV4 Sport was originally equipped with run-flat tires which explains why they typically didn't come with a spare tire or a good place to store one. The Buyer's Products # 3375201010 spare tire carrier is a universal fit item, so Buyer's Products doesn't offer specific mounting instructions or guidance. It would be up to the end user to determine the best placement and do the measuring to determine if the tire and mount would fit in the desired location....
  view full answer...
• Recommendations on How to Safely Carry 12 Foot Jon Boat on Roof of 2013 Hyundai Tucson
  A great choice would be a Inno Square bar roof rack, which would be made up of the following parts: 54 inch square profile crossbars part # INB137 Inno Feet for Crossbars, part # INSUT Vehicle specific clamp kit, part # INK605 To secure the boat to the roof, using ratchet straps like # IMF14256 hooked over the crossbars would provide a secure hold for the boat. Using foam blocks like # MPG152 would protect the roof rack from the boat and vice versa, as well as adding some friction to...
  view full answer...
• Recommended Kayak Carrier for 3 Kayaks on 2008 Toyota Highlander
  I envy your choice of lakes for your kayaking, but I can relate to the convenience of nearby water since I have to go only 1/4-mile to hit the lake in my kayak! If your 2008 Toyota Highlander has a factory-installed roof rack with crossbars that run side-to-side then you can use the Thule Kayak Stacker # TH830. The Stacker handles up to 4 kayaks up to 10-feet in length and holds them on their sides. Please click on the video link provided. If you don't have a factory roof rack but do...
  view full answer...
• How to Use Surco Safari 5.0 Cargo Basket on Roof of 2015 Chevy Suburban with OEM Roof Rack
  Hey Michael. so the Surco Safari Cargo Basket # S5072 can be used on the roof of your 2015 Chevy Suburban that has factory crossbars but not to them directly. The only way is to use the square bar adapter part # SPT400 and then install the Inno square bar roof rack # INB137, # INXP, # INTR154. I wish there was a simple way to attach it to your factory rack but that's not how the rack works unfortunately.
  view full answer...
• Will SportRack Roof Rack # SR1002 Fit a 2017 Civic EX 4Dr
  We do carry roof rack systems that fit your 2017 Honda Civic but the SportRack, part # SR1002, is not one of them. It only fits the Civic through 2013. Instead I recommend the Inno square bar system consisting of parts # INB137, # INSUT, and # INK684. This is the most cost effecient rack that fits your car.
  view full answer...
• Roof Rack and Kayak Carrier for 2020 Honda Civic Hatchback
  Yes the Inno Roof Rack system consisting of the 54" bars # INB137, Inno Feet for Square Crossbars # INSUT and the custom fit kit # INK684 will fit the 2020 Honda Civic Hatchback. The etrailer J-Style Kayak Carrier also fits this roof rack. It is not just as economical choice. The fold down feature is normally found in higher end carriers and I really like the included straps and anchors. This makes securing your Pelican Trailblazer 100 NXT much easier on your vehicle. I attached a video...
  view full answer...
• Fitment of Older Yakima and Thule Systems on a 2014 Nissan Frontier and 2015 Ford C-Max
  Thank you for all of the info and the pictures! When I looked at everything it sadly looks like none of your current older equipment will fit your newer vehicles save for the Thule bars on the C-Max. For your 2014 Nissan Frontier you can either use a 1 or 2 bar roof rack with a load extender or a ladder rack (or by itself) if you want. Here is a list of the following: 2-bar roof rack: 54" Vortex Crossbars - # RRVA137B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK374 1-bar roof rack: 54"...
  view full answer...
  
• Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails
  The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts: - 54" Square Crossbars # INB137 - Inno Feet # INFR As long as your crossbars are at least 54" you just need the feet and you're good to go!
  view full answer...
• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Replacement Lock Cover for Inno Feet
  Hi Scott; sorry for the delay on this it took a while to hear back from Inno. The part you need is the Replacement Lock Cover Set for Inno Roof Rack Feet Stays for Bare Roofs # IN97YV. This replaces the lock and cover on the # INSUT. However, this will be a random lock so more than likely it won't match the others on your roof rack. We don't have a way to get a specific lock core for it to remain keyed alike.
  view full answer...
• Parts Needed to Install Older Thule Square Bars 2012 Toyota Camry
  Hey Brian, you are on the right track for a solution to allow you to continue to use the older Thule square bars on your 2012 Toyota Camry as thankfully Inno decided to make their square bar racks to fit the exact same bar size. I am not sure how Thule feels about this haha... So what you need is the feet kit part # INSUT and the fit kit part # INK872 and you'd be set!
  view full answer...
• Thule Roof Rack Recommendation for 2012 Toyota Camry
  For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Parts Needed to Install Old Thule Square Bars on 2000 Toyota Tundra Access Cab SR5
  Hey Chris! To install your Thule square bars on the roof of your Tundra you will need the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK153. What will you be using the solar for?
  view full answer...
• Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak Carrier
  For your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
  view full answer...
• What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?
  Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
  view full answer...
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
  Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
  view full answer...
• How to Use Older Thule Square Bars with 2017 Toyota Highlander with Naked Roof
  Hey John, I do have a solution for you but the Thule square bar roof racks changed a few years ago and now their current feet don't work with the older style of crossbar. The new crossbar has a channel that runs along the bottom of it whereas old style did not have this. But we have found is that the Inno square bars are exact same dimensions so you can use their feet and fit kit with the bars you have now. For that you'd need the part numbers # INK666 for the correct fit kit and part...
  view full answer...
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• How To Determine Crossbar Placement On A 2024 Ford Maverick
  Hello Warren, I can definitely help. Roof rack manufacturers test vehicle roofs to determine the strongest points. They develop their fit kits to fit in this predetermined spot. So, this measurement will vary from vehicle to vehicle. For a 2024 Ford Maverick, the front crossbar will be placed 12-1/4" back from the top edge of the front windshield. The rear crossbar will be placed about 27-1/2" behind the front crossbar. There may be a bit of front/back wiggle room, but generally you will...
  view full answer...
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• Roof Rack Recommendation for 2006 Chevy Uplander
  Thule does not make a roof rack solution that fits the naked roof versions of the 2006 Chevy Uplander. Closest thing would be the Inno brand roof rack that consists of part numbers # INB127, # INSUT, and # INK585. This won't reuse any of your Thule roof rack but your roof carriers will fit this same square bar style of rack that you had.
  view full answer...
  
• Cost Effective Roof Rack Recommendation for 2011 Honda Accord
  What we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
  view full answer...
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Parts Needed To Mount Thule Square Crossbars On 2016 Honda CR-V
  Hello Chad, thanks for reaching out. I do have a solution for you, but first I will need to know exactly what kind of Thule square bars you have. Basically there are new-style and old-style bars. The new-style bars have a bottom channel for mounting the towers. The old-style bars are just a solid bar and do not have a bottom channel. We have solutions for both, just select from the following depending what kind of bar you have. New Style bars: - Evo Clamp Feet for Thule Crossbars - Naked...
  view full answer...
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• How to Mount Old Thule Square Bars to 2020 Toyota Camry
  Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
  view full answer...
  
• How to Adapt Old Thule Square Bars to 2015 Toyota Prius V
  Hello KMc; I don't think a fit kit is available but you can still install those old Thule bars on your Prius. The Thule square bars match the current Inno square bars. You can use the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK870. The full Inno roof rack # IN54XR comes with 50" bars so I would double check the length of your current crossbars to make sure they're appropriate for your vehicle.
  view full answer...
• Roof Rack Recommendation for 2018 Hyundai Tucson to Carry Thule Hullavator
  To install a Thule Hullavator on your 2018 Hyundai Tucson with a naked roof (thanks for picture), you will first need to install a roof rack. For that you'd want the Inno Square bar roof rack part numbers # INB137, # INSUT, and # INK680 which is a confirmed fit and will give you bars that the Hullavator can attach to.
  view full answer...
  
• Recommended Roof Rack for a 2021 Hyundai Tucson With Bare Roof
  I have great news, there are plenty of options for hauling kayaks, cargo boxes, cargo baskets, etc. on top of a 2021 Hyundai Tucson without factory side rails. If you have a bare roof without side rails then I recommend the Inno Aero Crossbar System part # INXB130-138, part # INXS250, and part # INK680. This system has aero crossbars and a custom fit a sleek look. It can then be used for pretty much any kayak carrier or cargo box/basket you like which I have attached lists of below.
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2021 Hyundai Tucson with Bare Roof
  The Inno Aero Crossbar Roof Rack part # INXB138-145, part # INXS250,and part # INK680 is an excellent option for a 2021 Hyundai Tucson with bare roof. This is an aero bar system so there will be reduced wind noise and mpg affects. The extended crossbars will be great for kayaks, giving you more space and making loading much easier. In order to secure a kayak you'll still need a carrier, the etrailer J-Style Kayak Carrier part # e98878 is what I recommend. It has all the tie-downs you need...
  view full answer...
• Recommended Solution for Carrying 2 Kayaks on Roof of 2017 Hyundai Tucson
  Inno makes a great roof rack solution for your vehicle. You might be more familiar with names like Thule or Yakima, but Inno is very well known on the west coast for making high quality roof racks at reasonable prices. You can construct a roof rack using the following parts: Crossbars, item # INXB138-145 Roof Rack Feet, item # INXS250 Vehicle Specific Clamp Kit, item # INK680 The crossbars used on the rack system above would be perfectly compatible with the Rhino Rack item # S512-S512X...
  view full answer...
• Recommended Load Stops for Inno Aero Bar Roof Rack on 2018 Hyundai Tucson
  The Inno Aero Bar Roof Rack that you referenced, which consists of # INXB108-115 for the two 42 inch Aero Crossbars, # INXS200 for the Flush Feet, and # INK680 for the Custom Fit Kit, is confirmed to fit your 2018 Hyundai Tucson and will work great. I have attached a short video demonstration that you can also check out.
  view full answer...
• What Size Crossbars Do I Need for the Thule Hullavator on My 2019 Hyundai Tucson?
  For a crossbar kit that will allow you to fit the Thule Hullavator # TH898 on you the roof of your 2019 Hyundai Tucson with factory flush rails involves the following components: - Inno Aero Crossbars - Aluminum - Black - 54" Long and 57" Long - Qty 2 # INXB138-145 - Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4 # INXS250 - Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK680 With this Inno system, you will be able to use the top channels in the crossbars...
  view full answer...
• Factory Look Roof Rack Recommendation for a 2017 Hyundai Tucson
  For your 2017 Hyundai Tucson I recommend the Inno roof rack consisting of the crossbars # INXB108-115, flush feet # INXS200, and custom fit kit # INK680. This will look the most like a factory roof rack of any option we carry. It will have crossbars that end into the feet so they won't stick out.
  view full answer...
• Flush Mounted Roof Rack Fit For 2020 Hyundai Tucson With Naked/Bare Roof
  We do have an option for a flush-mounted roof rack that fits your 2020 Hyundai Tucson with a naked roof, but I verified with Rola that there is not a fit for their rack on your '20 Tucson. What will fit instead is an option from Inno, which has the same flush-mounted style as the Rola for a streamlined look. The correct parts for your Tucson are the following: - Inno Aero Crossbars # INXB108-115 - Inno Flush Feet for Aero Crossbars - Naked Roofs # INXS200 - Custom Fit Kit for Inno #...
  view full answer...
• Roof Rack and Board Carrier for 2019 Hyundai Tucson
  To carry your boards on the roof of your 2019 Hyundai Tucson the first thing you'd need is a roof rack like the Inno aero bar rack part # INXB130-138, # INXS250, and # INK680 which is a confirmed fit and a higher quality rack at a lower price point. Then for a carrier for the boards the Thule SUP Shuttle part # TH811XT would be a really great option that is easy to use and works well.
  view full answer...
• Recommended Parts Needed to Carry a 12 Jon Boat on the Roof of a 2019 Hyundai Tucson
  We do have a solution for you via installing a roof rack on your 2019 Hyundai Tucson. If your Tucson has flush mount rails that run front to back then I recommend the Thule WingBar Evo roof rack which consists of 47" # TH711220 WingBar Evo Bars, the Evo Flush Foot Pack # TH710601, and Fit Kit # TH186013. If you just have a naked roof (no rails) then I recommend the Inno Aero style roof rack which uses Crossbars # INXB138-145, Through Feet # INXS250, and Fit Kit # INK680. The Thule roof...
  view full answer...
• Inno Roof Rack Recommendation for 2019 Hyundai Tucson
  For your 2019 Hyundai Tucson the Inno Roof Rack I'd recommend is the aero bar kit part numbers # INXB130-138, # INXS250, and # INK680 because it will give you the quietest ride quality over the square bar options from Inno.
  view full answer...
• Recommended Roof Rack With Square Load Bars For 2017 Hyundai Tucson
  I have just what you are looking for but Thule doesn't make a compatible system. My recommendation is the Inno roof rack consisting of the Inno Square Crossbars - Steel - Black - 54" Long - Qty 2 # INB137, the Inno Feet for Square Crossbars # INSUT and Custom Fit Kit # INK680. I've attached a video of a similar fit to assist. This roof rack is rated for 120 lb capacity.
  view full answer...
• Which Inno Rack Do You Recommend for a 2018 Hyundai Tucson?
  If you used the etrailer.com fit guide to find an Inno roof rack for your 2018 Hyundai Tuscon with a bare roof, all of those crossbar lengths will work for your vehicle. The racks that we have confirmed on our fit guide are confirmed to securely fit onto your vehicle properly. For a recommendation of an Inno roof rack, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 51" Long and 54" Long - Qty 2 # INXB130-138 - Inno Through Feet for Aero Crossbars - Naked...
  view full answer...
• Will The SportRack Roof Rack SR1002 Fit A 2017 Hyundai Tucson With Naked Roof?
  Hi David! I do have an option that I can guarantee to fit your 2017 Hyundai Tucson with a naked roof, but since the SportRack SR1002 was discontinued a while back, I can't say whether or not it will fit. It wasn't listed as a fit on SportRack's site and was more for late 80s and early 2000s vehicles when we had it on our site, so I am leaning towards it not being a fit for your vehicle, unfortunately. So with that said, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty...
  view full answer...