See what our Experts say about this Inno Roof Rack

• Roof Rack Recommendation for a 1992 Honda Civic Hatchback
  I have a solution for you, but the Rola 59758 is not a confirmed fit for your 1992 Honda Civic hatchback. Instead you would want the Sportrack part numbers # SR1003 and # SR1116 if you are looking for an economically priced option or the Inno part # INB107,# INSUT, # INJK, and # INK130 for a custom fit rack that will fit very well.
  view full answer...
  
• Will the Thule Rapid 400XT Foot Pack Work on a 2009 Toyota Matrix
  I do have an option for you but I spoke to my contact at Thule and they said that the Thule Rapid 400XT Foot Pack that you have cannot be reused on your 2009 Toyota Matrix because the fit kits are no longer available. Therefore, if you wanted to reuse your crossbars you would need both the Thule Rapid Traverse Roof-Rack Foot Pack part # TH480R and the Thule Roof-Rack Fit Kit for Traverse Foot Packs part # THKIT1512.
  view full answer...
  
• Roof Rack Recommendation for a 1995 Honda Civic
  For your 1995 Honda Civic 3 door hatchback the Sportrack roof rack part numbers # SR1003 and # SR1116 is a confirmed fit. However, this is a semi-custom fit roof rack that doesn't always fit every vehicle perfectly since it's designed to fit as many vehicles as possible. A much better option would be the INNO part numbers # INB107, # INSUT, and # INJK, and # INK130. This is a custom fit rack that would fit much better.
  view full answer...
  
• Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting Points
  For your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
  view full answer...
• Adding Roof Rack Crossbars on a 2013 Nissan Xterra to Mount Cargo Basket
  You can add crossbars to your 2013 Nissan Xterra. The aftermarket crossbars available do fit different years of the Xterra but I can't speak to the OEM bars. To add crossbars I recommend using Inno square bars # INB107 with feet # INFR that clamp around the side rails. With the bars installed and at the proper width you can mount the Thule basket # TH859XT.
  view full answer...
• Roof Rack Recommendation for a 2005 Mazda Tribute Flush Rails
  The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts: - 42" Square Crossbars # INB107 - Feet # INTR - Fit Kit # INTR103 If you let me know what you plan on using the roof rack for I can make a recommendation for you!
  view full answer...
• Parts Needed to Carry a Bike on the Roof of a 1995 Honda Civic Coupe
  We do have a handful of roof racks that are confirmed to fit your 1995 Honda Civic Coupe. The most popular roof rack option that we have for your Civic is the Inno square bar roof rack which consists of the Crossbars # INB107, Feet # INSUT, Short Roof Adapter Kit # INJK, and Fit Kit # INK130. This system has a weight capacity of 140 lbs and will give you a roof rack spread of 24 inches. For a more economical options we have the SportRack roof rack option which consists of the SportRack...
  view full answer...
• Roof Rack and Kayak Carriers for a 2010 Toyota Matrix
  To carry kayaks, a roof rack is only part of it. You'll also want a kayak carrier, primarily because they make loading, unloading and securing the kayak significantly easier. For the roof rack, if you have a bare roof with no rails that run front to back, I recommend the Inno # INB107 square crossbars, with the # XS250 feet, and # INSU-K5 fit kit. This kit is custom fit to your vehicle and installs quickly to your roof with secure clamps. Additionally, it includes locks to secure the...
  view full answer...
• Best Method To Haul 3 Or More Bikes On A 2011 Chevrolet HHR
  I do have an option that will allow you to carry more than two bikes on your 2011 Chevrolet HHR however, the Draw-Tite Sportframe Trailer Hitch Receiver part # 24756 and Curt Trailer Hitch Receiver part # C11447 are the only two hitch receivers available for your vehicle. As they are both a Class I hitch receivers, you will be limited to carrying two bikes on the rear of the vehicle with a hitch receiver per the manufacturer's. The most cost effective options would involve the use of...
  view full answer...
• Roof Rack Options for Transporting Kayaks on 1996 Honda Civic Hatchback
  Since you intend to transport a kayak(s) on the roof of your 1996 Honda Civic Hatchback my suggested starting point is a review of your owner's manual to confirm how much weight the vehicle's roof can safely handle. If you cannot find this in your manual a local Honda dealership should be able to check this using your car's VIN number. Depending on that roof weight capacity, and the weight of your kayak(s), the very lightweight foam block type of kayak carrier may indeed be a good option...
  view full answer...
• Recommended Roof Rack for 2010 Chevy HHR
  For a square bar roof rack for your 2010 HHR with raised roof side rails we do have options from Thule and Inno which use either 42-inch or 43-inch bars. These can be seen on the linked page along with all other rack brands and rack types. For a cost effective Thule option I like the Rapid Crossroad setup with 43-inch square bars; this consists of parts # TH712100 and # TH710401. For the lowest-cost square bar rack Inno offers 42-inch bar setup using parts # INB107 and # INFR. Do note...
  view full answer...
• Inno Square Bar Roof Rack for a 2016 Chevy Trax with Factory Side Rails
  The Inno feet # INFR are a fit for the 2016 Chevy Trax if it has factory side rails that run front to back on the roof. If you have a different roof configuration let me know. The bars that are recommend for the Trax that also work with these feet are the 42 inch bars # INB107.
  view full answer...
• Which Yakima Roof Mount Bike Racks Work with Factory Cross Bars on a 2004 Subaru Baja
  Basically, the factory cross bars on your 2004 Subaru Baja are not directly compatible with Yakima roof mount accessories like the FrontLoader Wheel Mount Bike Carrier, # Y02103, because of their size and/or shape. But there is a solution. If you wanted the FrontLoader specifically, you would need to add the Inno Square Bar Roof Rack, parts # INB107, # INTR and # INTR104.. You can then add the FrontLoader.
  view full answer...
• Roof Rack Recommendation for 2000 Acura Integra Hatchback
  We do offer roof rack options for your 2000 Acura Integra Hatchback. Inno offers a custom fit rack which consists of these parts: • 42 inch square crossbars, part # INB107 • Roof rack feet for square bars, part # INSUT • Short roof adapter, part # INJK • Vehicle-specific fit kit, part # INK130 SportRack offers a semi-custom rack option, which would be made up with these parts: • Semi-Custom rack, part # SR1003 • Short roof adapter, part # SR1116 If I had to choose between the two,...
  view full answer...
• Availability Of Replacement Inno Square Crossbar For Stolen Crossbar
  Inno does not sell single square bars, so even though you only need one bar you'll need to buy a pair. You didn't mention anything about the size of your crossbar, so you'll need to measure your current crossbar and match it to one of the below lengths: 42" # INB107 46" # INB117 50" # INB127 54" # INB137 58" # INB147 65" # INB165
  view full answer...
• Will the Inno Feet for Square Crossbars Fit My 2009 Pontiac Vibe?
  I have a solution for you. Unfortunately, the Inno Feet for Square Crossbars # INXP will not fit your naked roof with fixed mounting points on your 2009 Pontiac Vibe. Although, I did confirm with Rhino-Rack that they do have crossbars that are compatible with your vehicle's rails. For the Rhino-Rack setup, you will need: - Inno Square Crossbars - Steel - Black - 42" Long - Qty 2 # INB107 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200,...
  view full answer...
• Will SportRack Vista XL Cargo Box Fit a 2010 Nissan Xterra
  The SportRack Vista XL Cargo Box # SR7018 that you referenced will fit your 2010 Nissan Xterra, providing you have either factory crossbars or aftermarket crossbars that measure less than 4 inches wide. To install the cargo box the crossbar spread should be between 23-5/8 inches and 34 inches wide. I have the installation instructions attached. If you need crossbars for your Xterra, I recommend the Inno system which consists of square crossbars # INB107 and the feet # INFR. I like Inno's...
  view full answer...
• Will the Curt Cargo Basket # C18115-117 Fit My 2000 Nissan Xterra?
  If you have factory crossbars currently on your 2000 Nissan Xterra, the Curt Basket # C18115-117 will work as long as your crossbars do not exceed 3" wide x 1-5/8" tall. In order to know for sure, I recommend measuring the width and height of your crossbars. Also, you will need to determine if your crossbars are adjustable in order to accommodate the required crossbar spread of 22"-50". The way to do this is to simply measure the space between your crossbars at different adjustable points....
  view full answer...
• Recommended Roof Rack for a 2008 Kia Sorento to Carry a Kayak
  The SportRack Semi-Custom Roof Rack # SR1098 will be able to carry your 45 lb. Kayak and will fit a 3' roof. However, I do not recommend the SportRack Semi-Custom Roof Rack for your 2008 Kia Sorento as a semi-custom roof rack will not fit your vehicle as well as a custom roof rack. For a load like a kayak we find that a custom fit rack will provide a much more secure foundation. If you have factory side rails that run front to back, I recommend the Inno Square Crossbars consisting of...
  view full answer...
• Availability of Trailer Hitch for a 2000 Acura Integra
  It looks like there are no longer any trailer hitches that fit your 2000 Acura Integra. The Curt Trailer Hitch Receiver 11147 was discontinued this year (2023) so you might try searching to see if you can find that hitch elsewhere, otherwise I recommend installing a roof rack in order to add some cargo-carrying capacity to your vehicle (if that's what you're needing to do): Sedan - 42" Square Crossbars # INB107 - Feet for Square Crossbars # INSUT - Fit Kit # INK130 Hatchback Same parts,...
  view full answer...
• Inno Square Crossbar Roof Rack that Fits 2008 Nissan Xterra
  Inno does have a roof rack that fits your 2008 Nissan Xterra that uses the # INFR you mentioned. You need just the # INFR and the # INB107 and you'd be set.
  view full answer...
• Recommendation for Roof Rack to Carry a Ladder on a 1993 Ford Festiva
  I can help you find the correct roof racks for your 1993 Ford Festiva. An economical option for you is the Sport Rack # SR1003 in combination with the short roof adapter # SR1116 will allow you to have a two bar system even though you only have two doors. This roof racks capacity is 130lbs. Another option and the one that I recommend for your vehicle, is the Inno kit made up of the # INB107, # INSUT, # INJK, and # INK148. This kit uses a short roof adapter # INJK also to accommodate...
  view full answer...
• Which Thule Roof Cargo Box Fits a 2007 Kia Rondo With Flush Roof Rails
  To use a plastic cargo box such as the Thule Force Medium # TH6356B that you referenced you will first need to install a roof rack on your 2007 Kia Rondo and the one I recommend is the Inno square bar system made of parts # INB107, # INTR and # INTR103. This rack is made for your flush rails. You can refer to the linked video for details on its design. I recommend using an accessory folding step like # TE97FR from Telesteps which gives you easier access to your cargo items. The lightweight...
  view full answer...
• Will the Inno Roof Rack Fit on a 2020 Nissan Kicks with Fixed Mounting Points
  It looks like the 2020 Nissan Kicks has flush mounted rails with fixed mounting points, which is likely what you're seeing on your Kicks with the flat plastic strips/covers; there should be slots that pop up to allow you to install roof rack legs with fixed mounting points. With that said, the Inno Roof Rack Kit using parts # INXB115-2 (bars), # INXS350 (towers) and # IN28FR (fit kit) you were looking at is a confirmed fit on your 2020 Nissan Kicks with those fixed mounting points. The...
  view full answer...
• What Feet Can I Use to Mount Older Thule Square Crossbars on My 2012 Toyota Sienna with Raised Rails
  I have the part you need! Since Thule discontinued their old feet that are compatible with the older square crossbars without a bottom channel, Thule doesn't make feet that are compatible. However, Inno uses the same exact square crossbar dimensions 7/8" tall x 1-1/4" wide as Thule. Also, since the Inno crossbars do not have a bottom channel, they work perfect with your older square crossbars. The feet you need to complete your setup on your 2012 Toyota Sienna with raised rails is the...
  view full answer...
• Will Inno Square Bar Feet Work w/ Older Thule Square Bars?
  Yes, they can so long as your Thule square bars don't have slots on the bottom. The Inno Feet for Square Crossbars item # INFR work with the Thule square bars that measure 7/8" tall x 1-1/4" wide. The Inno Feet item # INFR will fit the raised rails on a 2023 Subaru Outback wagon. What are you planning on using your roof rack for?
  view full answer...
• Rack for 2009 Dodge Durango to Carry Ladders
  The MaxxTow Van Ladder Rack MT70440 won't work with a 2009 Dodge Durango but we may have a different option for you to consider. To help carry your ladders, if your Durango has the factory installed side rails, I recommend simply adding an inexpensive roof rack, the Curt Roof Rack Crossbars for Raised Side Rails # C18118, which has crossbars that are 53-3/8" long, or the longer 58" bars of the Malone SteelTop Roof Rack # MPG202. I have added links to video reviews of both options for you...
  view full answer...
• Is There A Universal Roof Rack That Can Use Thule Load Bars?
  Hi Greg! If the 2018 GMC Acadia you entered in our fit-guide is what you are wanting to put this on, then we might have something for you. If you have factory raised rails, you could use the Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4 # INFR. We have found the Thule Square Load Bars fit Inno towers and this would clamp around the factory raised rails pretty easily. If you have a naked roof though, there will not be a way to get anything to fit properly, unfortunately....
  view full answer...
• Availability Of Replacement Set Of Keys For An Inno Roof Rack
  It looks like you are looking for a replacement key for an Inno roof rack. While we do not carry a 1254 key from Inno, we do have a T254 key # IN43RR. Is it possible the number 1 on your key is actually a letter "T"? If so, the # IN43RR will be the correct key for you.
  view full answer...
• Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails
  The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts: - 54" Square Crossbars # INB137 - Inno Feet # INFR As long as your crossbars are at least 54" you just need the feet and you're good to go!
  view full answer...
• What Foot Pack Can I Use to Fit My Older Thule Square Bars on My 2014 Subaru XV Crosstrek?
  If you have older, pre-channel Thule SquareBars, I do have some option for you. If you happen to have raised factory rails on your 2014 Subaru XV Crosstreck, a compatible foot pack that will work is the Inno Feet for Square Crossbars - Raised Side Rails # INFR. This is because the Inno Square Crossbars like # INB127 have the same 7/8" tall x 1-1/4" wide dimensions as the Thule bars. With that being said, there is no solution if you have a bare roof. The only other option is to purchase...
  view full answer...
• Are Inno Square Roof Rack Bars the Same Dimensions as Thule Crossbars
  The Inno crossbars of the roof rack you mentioned part numbers # INB117 and # INFR match the same dimensions as Thule crossbars at 1-1/4 inches wide and 7/8 inches tall. This rack will work with your Thule roof bike racks that are designed to fit square crossbars.
  view full answer...
• Thule Square Bar Roof Rack Parts Needed for a 2023 Subaru Outback Wagon
  To install a Thule square bar system on your 2023 Subaru Outback Wagon you need the following legs depending on what version of the Thule square crossbars you have: New Thule Square Bars with Limited Slot Underneath - Evo Raised Rail Feet # TH710401 Old Thule Square Bars with Slot All the Way Through Underneath - Inno Feet # INFR When Thule redesigned their square bars they made it so the bars install on the feet using the slot method instead of the brackets fitting over the bars and...
  view full answer...
• Are Thule Square Bars Compatible With Inno Feet
  Rob, the Thule square bars and the Inno square bars have the same measurements so the Inno feet would be compatible. So if you have factory raised rails then you're going to need the Inno Feet for Square Crossbars # INFR, but if you have flush mounted rails you're going to need the Inno Feet for Square Crossbars # INXP with the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR.
  view full answer...
• What Feet Can I Use with My Older Thule Square Crossbars on My 2008 Volvo XC70 with Raised Rails?
  If you have older Thule square load bars that do not have the bottom channel, there is a way to use a different manufacturer's feet with your 2008 Volvo XC70. For that route, I recommend using the Inno Feet for Square Crossbars # INFR. These feet are designed to fit Inno square bars that measure 7/8" tall x 1-1/4" wide. Since the Thule square load bars have these same dimensions, you can use the Inno # INFR on your vehicle's raised rails. We've had dozens of neighbors who have used this method.
  view full answer...
• What Inno Square Bars do You Carry over 50 Inches Long for My 2022 Chevy Equinox?
  Yes! We do carry longer Inno Square Crossbars than the # INB127. For longer sizes, here is what we carry: - Inno Square Crossbars - Steel - Black - 58" Long # INB147 - Inno Square Crossbars - Steel - Black - 65" Long # INB165 - Inno Square Crossbars - Steel - Black - 71" Long # IN434 - Inno Square Crossbars - Steel - Black - 79" Long # IN436L It is important to note that Inno recommends the 50" # INB127 maximum crossbar length for your 2022 Chevy Equinox. If you go with longer crossbars,...
  view full answer...
• Can Hullavator and J-Style Carrier be Used to Carry Two 40 lb Kayaks on a 2003 Honda Odyssey
  We do have an option for you to use a roof rack to carry your kayaks but I am unsure as to the weight capacity of the roof of your 2003 Honda Odyssey. The Inno roof rack that we carry has a weight capacity of 140 lbs which would allow you to use the Hullavator # TH898 and the Hull-A-Port # TH834, but if your roof itself doesn't have a weight capacity of at least 135 (weight of the kayaks and both carriers combined) then you will be overloading your roof. The Thule roof rack options for...
  view full answer...
• Can I Put Thule Square Crossbars On My 2018 Subaru Outback Limited Wagon?
  We do have a square bar roof rack system that will fit your 2018 Subaru Outback Limited with factory raised rails. For the Towers you will want the Thule Evo feet # TH710601. For the fit kit it will be part # TH37CE. Please note that only the new Thule square bars will work with this setup. The new bars have a channel in the bottom of the bar, and the feet attach to the bottom of the bar. Old Thule square bars do not have this channel on the bottom and cannot be used with the new Evo...
  view full answer...
• How to Install Older Thule Square Crossbars on a 2020 Subaru Impreza
  Thanks for reaching out, Peter! The older Thule Podium Roof Mounted Foot Pack TH460 worked with the older style of Thule square crossbars, which is actually a good thing! When Thule released their Evo line they changed how the square bars install but we've found that the Inno square bar feet are compatible with those older Thule square bars so you'll need the following parts depending on whether your 2020 Subaru Impreza has raised rails or a naked roof: Raised Rails - Inno Feet # INFR Naked...
  view full answer...
• Carrying A Previous Generation Thule Hullavator On A 2011 Subaru Forester
  Your least expensive option would be to go with an Inno roof rack. Your older Thule Hullavator was designed to go with either square crossbars or round crossbars. The Inno rack uses square crossbars that are the same dimension as Thule's square crossbars. Your rack will consist of the following; Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127 or Inno Square Crossbars - Steel - Black - 58" Long - Qty 2, part # INB147 and Inno Feet for Square Crossbars - Raised Side...
  view full answer...
  
• Adding Roof Rack Crossbars on a 2013 Nissan Xterra to Mount Cargo Basket
  You can add crossbars to your 2013 Nissan Xterra. The aftermarket crossbars available do fit different years of the Xterra but I can't speak to the OEM bars. To add crossbars I recommend using Inno square bars # INB107 with feet # INFR that clamp around the side rails. With the bars installed and at the proper width you can mount the Thule basket # TH859XT.
  view full answer...
• Do Inno Crossbars Work With Thule Evo Raised Rail Feet
  The Thule Evo Raised Rail Feet # TH710401 do not work with other branded crossbars, but will fit any Thule Crossbar. That includes the Thule AeroBlade, WingBar, WingBar Evo, SquareBar, and ProBar. If you have Inno crossbars already then you'll want the Through Feet # INXS150 for aero-style crossbars or the Feet # INFR if you have their square crossbars.
  view full answer...
• Clearance Between Vehicle Sunroof and Roof Rack Crossbars of Inno Square Bar Roof Rack
  Roof rack makers generally do not recommend operating a vehicle's sunroof when an aftermarket roof rack is installed. Even if there is no clearance issue between the bottom of the crossbars and the top of the sunroof there would be a lot of noise from wind turbulence at the bars that would likely make you want to keep the sunroof closed anyway. Also note that any roof-rack-mount accessory item you might install on the crossbars - say a bike rack or cargo carrier - will use some type of...
  view full answer...
• How to Transport 3 Kayaks with 2018 VW Golf SportWagen
  To transport all 3 of your kayaks with your 2018 VW Golf SportWagen you will need to go with a set of roof rack crossbars and a post/stacking style carrier that mounts to them. Starting with the roof rack I recommend an Inno Square Bar System that consists of # INB137 for two 54 inch Square Crossbars and # INFR for the Mounting Feet. This will provide you with a durable system that has a 220 pound weight capacity. The mounting feet simply clamp around the factory rails on the roof of...
  view full answer...
• Parts Needed to Install Longer Crossbar Roof Rack on 2020 Toyota Sienna
  I have a 54 inch crossbar solution from Inno that will work great on your 2020 Toyota Sienna but since the tracks on the bottom of the aero Inno bars that attach them to the rack feet only goes so far across the bar you can't go with longer bars in this style than what's recommended. However the square bar roof racks from Inno attach in a way that does not limit the length of the bars at all. So you could install the 54 inch square bars part # INB137 on your 2020 Toyota Sienna but you'd...
  view full answer...
  
• Parts Needed to Use Old Thule Square Crossbars on 2020 Toyota RAV4 With Raised Rails
  Assuming you have the older Thule square crossbars and not the SquareBar Evo, and also that your 2020 Toyota RAV4 has raised side rails, you can mount those square bars with the following: - Inno Feet for Square Crossbars - Raised Side Rails # INFR For flush rails use # INXP and # IN33FR
  view full answer...
• Are Crossbars Required for the Inno Board Locker Surfboard Carrier Part # INA744
  In order to use the Inno Board Locker Surfboard Carrier part # INA744 on your Jeep Patriot with raised side rails you would need a set of crossbars. Unfortunately, none of our watersport carriers are designed to attach directly to the raised side rails. Generally speaking, almost all rooftop carriers are designed to attach to crossbars for the exception of some ski carriers and cargo bags. For your Jeep Patriot, I recommend using the Inno Square Crossbar Roof Rack System part # INB117...
  view full answer...
• What is Needed to Install the Yakima RocketBox Pro 14 Cargo Box on a 2011 Dodge Journey
  The Yakima RocketBox Pro 14 Cargo Box, part # Y07192, will fit your 2011 Dodge Journey if you have the factory roof rack with cross bars that run from side to side. If your 2011 Dodge Journey has just the factory installed side rails that run from front to back you will need to use the Inno Square Bar Roof Rack, parts # INB127 and # INFR. These parts will attach to your factory side rails and supply the cross bars that are needed for attachment of the Yakima RocketBox cargo box. The last...
  view full answer...

Do you have a question about this Roof Rack?