See what our Experts say about this Rhino Rack Roof Rack

• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Roof Rack Recommendation for a 2007 Chevy Trailblazer for Carrying Ladders
  I would recommend going with the Rhino Rack HD crossbar roof rack as it will have plenty of strength for your ladders. You would need the part numbers # RB1250B-2, # RLTP-2, and # RRVA-FK2-2 which have been confirmed as a fit for your 2007 Chevy Trailblazer raised side rails.. For load stops for the ladders you would then want the part # RRRLH. For 10 foot cinch straps you could also use the part # RTD3. Be sure not to exceed the roof weight capacity of your vehicle.
  view full answer...
• Will Yakima SkyBox 21 Fit on Rhino-Rack Heavy-Duty Roof Rack Crossbars
  The max dimensions for a crossbar that the Yakima SkyBox 21 # Y07337 can accommodate is 3-1/2" x 1-11/16". The Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250B-2 are a little too tall for that so if you want to stick with Rhino-Rack you need the Vortex crossbars like part # RRVA137B-2. If you let me know the year/make/model of your vehicle I can make a roof rack recommendation for you. The Rhino-Rack HD bars are much taller than typical crossbars so none of the Yakima boxes will work,...
  view full answer...
• Roof Weight Capacity of 2005 Toyota Highlander Fitted with Rhino-Rack Heavy Duty Roof Rack
  The Rhino-Rack Heavy Duty Roof Rack for your 2005 Toyota Highlander, which consists of parts # RB1250B-2 and # CXB, does carry a 200-lb weight rating. Your vehicle itself will also have a roof weight capacity that could be more, the same or less. Your manual's indicated weight limit of 100-lbs could be for an OEM roof rack, or it could be for the overall roof structure itself. If Toyota says the roof itself can handle 100-lbs and no more, then you will have to abide by that lower rating....
  view full answer...
• What Setup Do I Need to Install a Rhino-Rack Pioneer Platform Rack on My 2005 Porsche Cayenne?
  I have a solution for you. Unfortunately, the Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 58" Long x 47" Wide # RR42115BF does require crossbars, but it is not compatible with HD crossbars. With that being said, we do carry the Rhino Rack Aero Crossbars # RRVA126B-2 that have a maximum weight capacity of 175 - pounds when mounted on your 2005 Porsche Cayenne. This is the exact weight rating as the Rhino-Rack HD bars # RB1250B-2. For a compatible roof rack with...
  view full answer...
• Recommended Roof Rack And Ladder Mounting Kit For 2016 Nissan Versa Note
  The roof rack I recommend for your 2016 Versa Note is the Rhino-Rack Heavy-Duty Roof Rack. This roof rack has 50-inch long crossbars that have a rubber strip in the crossbar channel to help cushion any items you carry on the roof rack. The roof rack has a 165-lb weight capacity. To order this roof rack you will need part # RB1250B-2, part # RRRLKHD, and part # DK382. to make it easier to secure the ladder on your roof rack I recommend part # REGLK2B. This kit fits the C-channels on...
  view full answer...
• Will the Rhino-Rack HD Crossbars Allow Me to Transport 2 Kayaks on My 2014 Kia Sorrento LX?
  Yes, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 50" Long - Qty 2 # RB1250B-2 (black) and # RB1250 (silver) are compatible with the bare roof on your 2014 Kia Sorrento LX without a vista roof. For a complete roof rack system, you will need the following parts: - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK179 For a J-style carrier...
  view full answer...
• Recommended Roof Rack for 2000 Honda CR-V
  Ladder racks are only for trucks, so your 2000 Honda CRV will instead utilize a roof rack. I recommend the Rhino Rack roof rack consisting of the following that are confirmed to fit your vehicle: Vortex Aero Crossbars - Aluminum - Black - 46" Long # RRVA118B-2 2500 Series Legs # RRRLKVA Custom DK Fit Kit # DK053 This rack is rated for 110 lb capacity maximum. I recommend also using the metal lock cores # RRVA-LEC4 for security when utilizing the top channels of the bars. If you want...
  view full answer...
• Roof Rack Recommendation for 2010 Toyota Corolla with Naked Roof for Snowboard Carrier
  For your 2010 Toyota Corolla sedan with a naked roof we have the 2010 Toyota Corolla Roof Rack by Rhino Rack which includes part numbers # RB1250B-2, # RRRLKHD and # DK152 as a confirmed fit which would work great for a snowboard rack like the Rhino Rack # RR574 which can carry up to 4 pairs of skis or 2 boards.
  view full answer...
• Roof Rack to Carry Ladders on a 2001 Ford Escape
  Your 2001 Ford Escape could have 1 of 3 possible roof configurations. I will provide recommendations for each type. Since you are using the rack to carry ladders it doesn't have to be a fancy rack so I will provide good economical options. First, if your Escape does not have any rails or bars at all on the roof the most quality option is going to be a Rhino-Rack using the following parts: Vortex Crossbars # RRVA126B-2 Feet # RRRLKVA Fit kit # DK099 If your Escape has factory tracks,...
  view full answer...
• Do Rhino-Rack Roof Rack Tracks Fit 2015 Chevy Equinox
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW will fit your 2015 Chevy Equinox; they are a universal fit so you just need to mount the tracks to your roof and add the correct feet and crossbars. Here is what you will need for an entire rack system: - Rhino-Rack RTC-Style Roof Rack Tracks # RTC8JW - Track Mount RLTP Legs # RLTP - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1250B-2
  view full answer...
• Roof Rack for 2013 Mazda 3 Five Door to Carry a Rowing Shell
  The most cost effective and aerodynamic (thus quiet) roof rack would be a Rhino Rack system, that would consist of the following: 44 inch Silver Vortex Aero Crossbars # RRVA118S-2 (also available in black as # RRVA118B-2) Leg Kit # RRRLKVA Vehicle Specific Fit Kit for vehicles with fixed roof mounted attachment points, # DK289 The rack would be easily removable when needed. Rather than resting your rowing shell directly on the crossbars, I'd recommend using a foam block system like the...
  view full answer...
• Does Rhino Rack HD Roof Rack Fit 2011 BMW X3 with Naked Roof and Sunroof
  The Rhino Rack HD part numbers # RB1250B-2, # RRRLKHD, and # DK295 is a confirmed fit for your 2011 BMW X3 with a naked roof and would not interfere with the sunroof. You aren't going to want to open the sunroof with this rack installed though as it will make quite a bit of noise. If you keep the roof clean as well as the mounting pads of the feet there would not be any long term damage done to the vehicle.
  view full answer...
• Bike Rack Options on a 2009 Porsche Cayenne?
  There is a confirmed fit for a trailer hitch on your 2009 Porsche Cayenne, so long as it does not have a rear-mounted spare tire. The Curt Trailer Hitch Receiver, # 13220, is a two-inch hitch with a class III rating, which will be more than adequate for the use of a bike rack. I have included a link to a video install of this hitch. If you are looking for a bike rack to attach to your hitch, I recommend the Kuat NV 2.0 2-Bike Platform Rack, # NV22G. This is a platform-style rack which...
  view full answer...
• Rhino Rack Roof Rack Fits for 2015 Infiniti Q40
  Rhino Rack's online fitguide isn't always up to date. We know for certain that the Rhino Rack part # RR47SR that you referenced and the # RB1250B-2, # RRRLKHD, and # DK211 is a confirmed fit.
  view full answer...
• Using Rhino Rack 50 Inch Crossbars on 2011 Honda Accord
  You can certainly use 50 inch load bars on your Accord. Rhino Rack offers a Heavy Duty rack system that uses 50 inch load bars. You can assemble a system by using the following parts: Heavy Duty 50 Inch Crossbars, part # RB1250B-2 Leg Kit, part # RRRLKHD Vehicle Specific Clamp Kit, part # DK184 The rack has a 110 lb capacity, which might be limited by the capacity of your Accord's roof if it is less.
  view full answer...
• Can I Use My Existing Rhino-Rack Crossbars From Gutter Mounted Leg With SX Series Legs
  If your existing Rhino-Rack crossbars are the 49" Vortex Aero Crossbars, part # RRVA126B-2, all you will need is the Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4, part # RRSX100. If your roof rack has the Rhino-Rack Heavy-Duty Roof Rack Crossbars Black - 50" Long - Qty 2, part # RB1250B-2, you will need to add the aforementioned Vortex Aero Crossbars to the SX Series Legs to complete your roof rack. I have included product description links and...
  view full answer...
• Rhino-Rack Heavy Duty Roof Rack for 2018 Volkswagen Passat
  The Rhino-Rack # Y01-140B-NT is designed to fit roof mounted tracks such as what would be found on a camper shell, it's not typically used on a vehicle roof. You can install a similar rack using the following parts: • Rhino-Rack Heavy Duty 50 inch crossbars, part # RB1250B-2 for black or # RB1250 for silver • Series 2500 Legs, part # RRRLKHD • Vehicle-Specific fit clips, part # DK323 This rack has a 165 lb capacity and is custom designed to fit your vehicle.
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Will the Heavy Duty Rhino-Rack Roof Rack Fit a 2015 Nissan NV 3500?
  I have a great alternative for your crossbar setup. Unfortunately, the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT is not confirmed to fit your 2015 Nissan NV 3500. However, we do carry a similar heavy duty bar setup by Rhino-Rack that does fit your 2015 Nissan NV 3500. For this setup, I recommend the following parts: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit for 4 Rhino-Rack...
  view full answer...
  
• Do Parts of Rhino Rack Roof Rack From 2012 Ford Escape Fit 2014 Ford F-150 SuperCrew Cab?
  I checked with Rhino Rack and the square bar roof racks that fit a 2012 Ford Escape and 2014 Ford F-150 do share the same # RRRLKHD 2500 Series legs which are for HD crossbars, so if that's what you have you would be able to use those legs on your F-150. If you have different legs there is NOT going to be a fit. Apart from that you are correct that you would need new crossbars and a new fit kit. The correct crossbars for the '14 F-150 would be the Rhino-Rack Heavy-Duty Roof Rack Crossbars...
  view full answer...
• Are Feet and Fit Kit Available for Rhino Rack HD Rack RR28DP for Silverado
  Hey Jonathon, we do have just the replacement feet of the # RR28DP available with the part # RRRLKHD and the fit kit # DK427. I'd definitely brag to your wife how much money you saved just getting the feet and reusing your current bars haha.
  view full answer...
• Rhino-Rack Heavy-Duty or Vortex Crossbars for 2019 Ford Transit Connect
  The primary difference between the Rhino-Rack Heavy-Duty Crossbars and the Rhino-Rack Vortex Aero Crossbars has to do with what they are designed to carry and what accessories work well with them. The Heavy-Duty Crossbars feature built-in C-channels that are made specifically for Rhino-Rack Heavy-Duty accessories like the Hi-Lift Jack Mounting Brackets # RJHB. Because the bars are larger than most other systems they will not be compatible with a lot of accessories that aren't specifically...
  view full answer...
  
• Recommended No-Drill Roof Rack System To Attach A Rhino Rack Pioneer Platform On 2017 Ram 1500
  To attach the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR42113BF to your 2017 Ram 1500 Crew Cab without drilling you'll need to first install the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long - Qty 2 # RB1500B-2, Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 # RRRLKHD, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK043. This system will clamp onto...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Which Heavy Duty Crossbar Setup Should I Use On My 2015 Ford F-350 Super Duty?
  I am showing that the correct Rhino-Rack heavy duty crossbar setup for your 2015 Ford F-350 crew cab is Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 59" Long # RB1500B-2. You will also need Leg Kit # RRRLKHD and Fit Kit # DK190 to install this onto your roof. This has a 165lb weigh capacity and is 59" long. You can install accessories by clamping onto the crossbars or by using the T-slot track. I have attached an installation video showing this roof rack being installed on a different...
  view full answer...
• Can I Carry Two Kayaks Side by Side on My Roof Rack?
  The roof rack you're asking about is a Rhino-Rack System with parts # RB1250, # RRRLKHD, # DK376 which has 50" long crossbars. As for if you can carry two kayaks lying down side by side, it's unlikely, but depends on your kayaks. Kayak widths can range from 22" to 30". If you have saddle-style kayak carriers like the Malone SaddleUp Pro # MPG110MD and your kayaks are less than 24" in width, then you can set them up side by side. If your kayaks are too wide though, you can get two J-style...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Roof Rack and Platform Recommendation for Roof of 2013 Toyota Highlander
  I have a solution for you, you'd want the Rhino Rack HD roof rack part # RB1375B-2, # RRRLKHD, and # DK138 which will allow you to use a Pioneer Platform Tray part # RR42112BF with the adapter part # RR43105. This has a lower capacity listed for what you are wanting to do but that's based on the application of it being used on the highway. For a situation like yours where the weight won't be bouncing around this would work well assuming your Highlander also has a similar weight capacity....
  view full answer...
• Carrying Plywood Sheets on a 2011 Subaru Forester
  I have a solution for you, but we do not carry large enough roof baskets for this application. Instead, I'd choose a rack that is at least a little wider than the lumber you're intending to carry. This will give you ample room to support the sheet itself, and give you additional room for the tiedowns you'll need in order to keep the panels secure. I've included a link to the range of 54 inch and wider bar kits that fit a 2011 Subaru Forester, but I have a recommendation based on compatibility...
  view full answer...
• Tonneau Cover and Rack Options for 2007 Honda Ridgeline
  The tonneau cover manufacturers do offer some covers for other trucks that have the T-slots in the side rails that can be used tor installing a ladder rack like the Yakima OverHaul HD, but unfortunately they don't offer anything like this for your 2007 Honda Ridgeline. If the 165 lb capacity of a standard roof rack would work for you, your best bet would be to go with a tonneau cover like the BAK BAKFlip F1 you'd looked at, part # BAK72601 and use a roof rack on the vehicle. I'd recommend...
  view full answer...
• How to Mount Putco 40 LED Light Bar on 2006 Honda Ridgeline
  The Putco Luminix Off-Road LED Light Bar # P10040 is a fit for your 2006 Honda Ridgeline as long as you have the Bumper Mounting Bracket # P2255 installed, yes. In order to install something without modifying anything on your Ridgeline we'll have to install a roof rack, like the Rhino-Rack HD model listed below, and then use same-brand LED light mounting brackets like what we find with part # RR43174. 59" HD Crossbars - # RB1500B-2 2500 Series Legs - # RRRLKHD Fit Kit - # DK155 Since...
  view full answer...
• Ladder Rack Recommendation for Camper Shell on 2002 Toyota Tacoma
  We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part # TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to the cap. See picture. I also attached an install video link for you to check out as well.
  view full answer...
  
• Weight Capacity and Comparison of Rhino Roof Racks for a 2011 Acura RDX
  I spoke with my contact for Rhino Rack and he said the weight capacity for all Rhino-Rack roof racks for your 2011 Acura RDX is 110 lbs. I think you were looking at the Rhino-Rack Heavy-Duty roof rack with the Heavy-Duty crossbars, # RB1375, the leg kit, # RRRLKHD, and Custom DK Clamps and Pads, # DK177. The Heavy-Duty crossbars will have a higher weight capacity, but once they are installed on a 2011 Acura RDX, the entire roof rack capacity drops to 110 lbs due to the limitations on the...
  view full answer...
• Roof Rack and 2-Kayak Carrier for 2016 Honda Accord Sport Sedan
  The Rhino-Rack ROC25 Series Heavy-Duty roof rack for your 2016 Honda Accord Sport Sedan that is made of parts # RB1375, # RRRLKHD and # DK359 is indeed a confirmed fit for your car. But note that this rack's unusual bar profile means reduced compatibility of accessory items like kayak carriers. You will have fewer kayak carrier choices with this rack. Instead I suggest their Vortex Aero rack # RR32SR which features quieter aerodynamic crossbars that will generate much less wind noise than...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for a 2008 Chevy Silverado
  A Rhino Rack Roof Rack that includes the part # RRRLKHD would do an excellent job for carrying a 15 foot canoe on your 2008 Chevy Silverado. The rest of the parts needed to complete the roof rack would be the part # RB1375B-2 and # DK227. This is one of the strongest racks we offer so it would definitely take a lot of abuse. It would be great for carrying your canoe. For securing a canoe upside down on the crossbars I would recommend the Ratchet Grab part # RRRRG. I spoke to my contact...
  view full answer...
• Sturdy Roof Rack Recommendation for 2008 Chevy Cobalt
  For a vehicle like your 2008 Chevy Cobalt I would not want to recommend a track style of rack as the best option. The tracks aren't going to flex enough to fit well and the clamp style racks are much sturdier than one might think so even though that's not the option you listed wanting it would be your overall best option still. Rhino Rack does offer a heavy duty roof rack that fits your vehicle with the # RB1250, # RRRLKHD, and # DK181 if you have a sedan or part # DK182 for a coupe but...
  view full answer...
• Do I Have To Drill Afer Installing The Tracks On The Rhino Rack Roof Rack System # Y01-120-NT?
  The foot # RRRLKHD to crossbar # RB1375B-2 is adjustable along the bar with the kit you're looking at # Y01-120B-NT. The only drilling required is to install the tracks so if they are already installed no need to do any more drilling.
  view full answer...
  
• Kayak Carrier Recommendation for 2009 Ford F-150 With Factory Folding Tonneau Cover
  A ladder rack is one option for transporting your kayak on your F-150 that has the dealer-installed folding tonneau cover, but note there can sometimes be interference between the common mounting requirements for tonneau covers and ladder racks since both install on the bed rails. I can offer you a simple and very cost-effective option IF your tonneau cover can handle the weight of your kayak. We offer foam block carriers that are very inexpensive, simple to install and that weigh very...
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• Aero Bar Style Roof Rack for 2011 Toyota Tacoma
  If you have a naked roof on your 2011 Toyota Tacoma the Rhino Rack 2500 Series Roof Rack is a nice option. The locks included with the roof rack system are for the covers on the legs of the roof rack. Once the roof rack has been fit to the roof of your Tacoma you place the locking cover in place so the roof rack cannot be removed from the vehicle. To order this roof rack you will need part # RRVA137B-2, part # RRRLKVA, and part # DK046. I have included a link to an in-depth product review...
  view full answer...
• Recommended Roof Rack for a 2012 Toyota Tacoma
  Thanks for the picture! I can't tell if your 2012 Toyota Tacoma has the double, access, or regular cab so I am going to recommend parts that fit each. If you just have the regular cab Tacoma you will need a couple of the Rhino-Rack ROC25 Roof Rack for Naked Roofs item # RR62VR. These are sold individually and mount inside your door frame for a secure fit. This system will give you a 165 lbs capacity. If your 2012 Tacoma is an access cab or double cab you will need the following parts: Rhino-Rack...
  view full answer...
  
• Are Rhino-Rack Clamps SUB0144 Available
  While we have an option for you, the SUB0144 clamps are not available as a standalone part. What you can do if you like is get the Fit Kit, which does include those clamps as well as the rubber pads,, with the following: - Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK046 This would be the only way to get the clamps if you are looking for replacements, and I have added a link below to a video review for you to check out as well.
  view full answer...
• Is There a Roof Rack That Bolts Onto Ditch Channel for 2014 Toyota Tacoma Access Cab
  I do have an option for you but there aren't any roof racks for a 2014 Toyota Tacoma Access Cab that attach to hardware under the ditch molding (if present). Therefore, you can either go with a rack that hooks onto the door jambs or you can drill into the roof to install tracks. The option is up to you but these are your only two choices for this vehicle in regards to carrying anything over the cab. Door Clips (No Drilling Required): Rhino-Rack Vortex Aero Crossbar System part # RRVA137B-2,...
  view full answer...
• Roof Rack that Fits 2015 Ford Fiesta Hatchback 5-Door
  Yes, the Rhino-Rack 2500 roof rack is a confirmed fit for your 2015 Ford Fiesta 5-door hatchback so it would fit and work well. This rack consisting of # RRVA118B-2 for crossbars, # RRRLKVA for feet, and custom fit kit # DK046. I've attached an installation video to assist.
  view full answer...
  
• Will the Rhino-Rack 2500 Roof Rack Fit on a 2016 Ford Fiesta Without Scratching the Paint
  The Rhino-Rack 2500 roof rack consisting of # RRVA118B-2 for crossbars, # RRRLKVA for feet, and custom fit kit # DK046 is a confirmed fit for your 2016 Ford Fiesta. It will do well to not scratch your paint since it is secured by coated stainless steel clips and uses molded rubber pads to mount. This roof rack has a weight capacity of 110 lbs and has built-in security hardware to deter theft.
  view full answer...
• Roof Rack for 2014 Toyota Tacoma Quad Cab to Carry Thule Force XT Cargo Box XXL
  For your 2014 Toyota Tacoma quad cab with a naked roof you will need a roof rack with crossbars to carry the Thule Force XT part # TH6359B which for that I'd recommend the Rhino Rack roof rack part # RRVA137B-2, # RRRLKVA, and # DK046. This is a higher quality roof rack that fits your truck that costs less than the competition in terms of quality.
  view full answer...
• Does Rhino-Rack Roof Rack Need to Remove After Each Use
  You could leave the Rhino-Rack 2500 Series Roof Rack consisting of # RRVA118B-2 for crossbars, # RRRLKVA for feet, and custom fit kit # DK046 on for extended periods of time without issue. You wouldn't need to worry about taking it off after every use. I'd take it off periodically to clean the pads and the roof where it installs but that's the only time you'd need to have it removed with the exception of going through automated car washes.
  view full answer...
• Adding A Single Bar Rhino-Rack Roof Rack With A HD Bar To My 2012 Toyota Tacoma Access Cab
  I do have a workable solution for your 2012 Toyota Tacoma Access Cab . You will use the following items for your crossbar on the roof of your vehicle: Rhino-Rack Heavy-Duty Roof Rack Crossbar - Black - 54" Long - Qty 1, part # RB1375B Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars - Naked Roofs or Fixed Mounting Points - Qty 2, part # RRRLKHDH Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof, part # DK046 I have included product description links below.
  view full answer...
• Hitch and Cargo Carrier Recommendation for a 2012 Ford Fiesta
  I have a solution for you, but there are no hitches available for your 2012 Ford Fiesta hatchback so the cargo carrier you reference would not be able to be carried with your vehicle. If you are interested, you could instead add a roof rack using parts # RRVA118B-2, # RRRLKVA, and # DK046 which would fit if you don't have any crossbars currently. You could then add a rooftop cargo carrier. I attached a review video for both products I mentioned as well.
  view full answer...
• Bike Rack Recommendations While Towing Tear Camper with 2011 Ford Fiesta
  I do have a couple of possible solutions for you, however I cannot recommend using a hitch extender along with the Ultra-Fab 2" Motor Home Trailer Hitch Receiver # UF35-946401 or something similar, to tow your tear camper with a hitch mounted bike rack. Using a hitch extender is going to reduce the weight capacity of your trailer hitch by 50%, so you will simply not have enough capacity for the camper and bike rack when the extender is used. Also, the Ultra-Fab Motor Home Hitch Receiver...
  view full answer...
• Roof Rack & Ski/Snowboard Carriers for Elliptical Bars on 2016 Ford Fiesta with Bare Roof
  The Rhino-Rack 2500 roof rack that fit your 2016 Ford Fiesta with a bare roof consists of # RRVA118B-2 for crossbars, # RRRLKVA for feet, and custom fit kit # DK046. This rack features elliptical-shape crossbars that are quieter than round or square bars and these reduce the need for a wind fairing. Still, if you want one use # RRRF2 for greater reduced wind noise. Most rack makers recommend NOT opening the sun roof/moon roof on a vehicle when a roof rack is installed since some mounted...
  view full answer...
• Roof Rack Needed to Carry Kayaks on a 2014 Toyota Tacoma with a Truck Cap
  If you are looking for a roof rack for the truck cap on your 2014 Toyota Tacoma then the only option we have available is the TracRac CapRac Ladder Rack # TA29200XT. This will install permanently on your truck cap but you can remove the crossbars and the legs leaving just the mounts for a clean look when you do not want to use the roof rack. If you are looking for a roof rack for the cab of your Tacoma then a great option for you would be the Rhino-Rack square bar roof rack. This consists...
  view full answer...
• Roof Rack Recommendation for 2013 Toyota Tacoma Access Cab
  There's a very good option for a roof rack (short rack) for your 2013 Toyota Tacoma Access Cab; I strongly recommend the Rhino-Rack Aero Bar Roof Rack because it is a functional, strong and quiet rack that is high-quality but more economical than some of its competitors. The rack consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK046 The crossbars of this rack give have 54" of usable space to ensure you have plenty...
  view full answer...
• Recommended Rhino-Rack Roof Rack for Both a 2015 Mitsubishi Mirage and 2016 Ford Fiesta
  I do have a solution for you, but the Rhino Rack RS 2500 bars are custom fit lengths and will not work for both your 2016 Ford Fiesta and 2015 Mitsubishi Mirage. Instead, if you like the Aero Bar look of the Rhino Rack crossbars I would instead suggest going with the Rhino Rack Vortex System that is made up of black crossbars # RRVA118B-2, Vortex foot # RRRLKVA, and custom DK clamp kit # DK367 for your 2015 Mitsubishi Mirage. The only thing you will need to do to adapt this Vortex roof...
  view full answer...
• Economic Priced Roof Rack and Cargo Basket Recommendation for 2012 Toyota Tacoma with Naked Roof
  For your 2012 Toyota Tacoma with a naked roof and fixed mounting points for a roof rack the most affordable rack option we have is going to be the Rhino Rack part numbers # RRVA137B-2, # RRRLKVA, and # DK046. This is a high quality rack at an affordable price so it would be your best option. Then for an economical cargo basket to fit this rack we have the Thule part # TH859XT which would be a great option. It measures 49 inches by 40 inches and is 6 inches deep.
  view full answer...
• Rhino Rack Legs and Custom Fit Kit for 2006 Toyota Tacoma Access Cab
  The Rhino-Rack RLCP Front Leg Kit for OEM Fixed Mounting Points - Pad Mount - Qty 2 # RRRLCP02F are not a fit for your 2006 Tacoma Access Cab. You will instead need the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA which are compatible with vortex aero or heavy duty crossbars and then the Custom DK Fit Kit # DK046. Based on what you stated, I believe your crossbars will work but the clamps will not.
  view full answer...
• Rhino-Rack Roof Rack Options for a 2008 Dodge Avenger
  The Rhno-Rack legs that fit your 2008 Dodge Avenger are the 2500 Series Legs # RRRLKVA. To complete the roof rack you need crossbars # RRVA126B-2, and fit kit # DK046 to install on your Avenger. The Rapid Traverse foot pack # TH480R, will require AeroBlade bars # THARB53 , and fit kit # THKIT1539. The Vortex aero bars are much quieter and aerodynamic than square bars. Plus they look a whole lot better than the square bars, more OEM, in my opinion. I've linked a video of the system...
  view full answer...
• Aero Crossbar Rhino Rack Roof Rack Recommendation for 2009 Toyota Tacoma
  We have an aero crossbar roof rack by Rhino Rack that is a confirmed fit but it does not use the RLT600 feet. Instead you would want the part numbers # RRVA137B-2, # RRRLKVA, and # DK046 which is a fit for the naked roof of your 2009 Toyota Tacoma.
  view full answer...
• Will Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 Fit on 2011 Ford Fiesta SES Hatchback
  Yes, the Rhino-Rack Vortex Aero Crossbars, # RRVA118B-2 will work on your 2011 Ford Fiesta SES Hatchback. To complete the roof rack set-up, you will just need 2500 Series Legs, # RRRLKVA, and Custom DK Clamps and Pads, # DK046.
  view full answer...
• Using Car Pod Cargo Carrier on Front Mounted Hitch of 2015 Toyota Tacoma
  It would initially seem that a front mounted cargo carrier is a good idea, but it's not a practice I recommend for three pretty good reasons. • Having the carrier at the front restricts airflow into the radiator, which could cause the engine to overheat. Which would be bad. • The carrier can interfere with the truck's headlights. Which would also be bad. • The carrier can interfere with the driver's vision of the road, leading to an unsafe situation. Which could be really bad. I'd...
  view full answer...

Do you have a question about this Roof Rack?