A cracked skylight or worn interior trim can leave you with leaks and an unfinished ceiling. This complete kit fits 14" x 22" openings with a white skylight, heavy-duty inner garnish, and approved sealant for a finished look inside and out.
When the skylight needs replacing, worn or damaged trim inside can leave you with another project waiting after the roof work is finished. This kit gives you the 14" x 22" white polycarbonate skylight, heavy-duty inner garnish, and approved sealant together. You can replace the exterior skylight and finish the opening from inside without piecing together the main components separately.
Replacing the outer skylight only solves half the problem when the opening still looks unfinished from inside your RV. The included garnish uses heavy-duty, injection-molded ABS plastic that is built to stay strong and UV-stable over time. White walls finish the edges around the ceiling opening, while the clear top lets natural light continue into the space.
Finding out a replacement does not match your opening after the old skylight comes off can bring the whole project to a stop. This kit is designed for a 14" x 22" roof opening. The outer skylight has a 17-1/2" x 25-1/2" flange, while the inner garnish measures 17" x 25" at the flange, giving you the key dimensions to check before starting the job.
A skylight can brighten a small RV bathroom or living space, but direct sunlight can feel harsh when it pours through the roof. The white outer skylight and lightly frosted inner garnish both diffuse incoming light, softening its intensity while still allowing natural light to pass through. The result is a brighter interior with a softer, more even feel overhead.
Roof thickness can make replacement more complicated when the interior trim does not have enough depth to finish the opening properly. The contoured inner garnish is designed for roofs at least 1-1/2" thick, giving you more flexibility across compatible RV ceiling depths. Check your roof thickness and opening dimensions before ordering so you know the kit matches your setup.
Get a waterproof install using the included sealant approved for use with polycarbonate plastic. Remove the old skylight, then clean and prep the roof surface so it's dry and debris-free. For added sealing, apply butyl tape (sold separately) along the skylight flange before setting it in place. Secure it with 1" zinc or stainless steel screws (not included), then seal over the flange edges and fasteners with the included sealant. Install the garnish from the inside using 1" screws (not included) to complete the setup. If you need hardware or additional sealant, an install kit is available separately (SR76RR). If you'd like help installing your skylight, check out our Installer Locator to find an installer near you.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steven here with etrailer. Today we're taking a look at our Specialty Recreation Heavy-Duty Skylight Kit for a 14 by 22-inch common opening. So folks, I mentioned again, that 14 by 22-inch. This is compatible with that style or that size opening. So, what you're getting here is the outside piece.
And then, of course, the interior garnish. Bear with me as my backdrop wants to fall. So as you can see, this is your main cutout here. That's that 14 by 22 where they're getting that measurement. And of course, you have all your holes pre-drilled and everything on there.
And then this other piece, this is the other piece that marries up to it. On this, I got 26 inches outside to outside by 18. But once again, this is the main part that needs to match up with that 14 by 22-inch application. Now, this is an injection-molded design. It's gonna provide a clean finish interior appearance.
And it's also considered a universal design. So, it's gonna support a wide range variety of different RV models and campers. Again, as long as you have that compatible cutout size that we we inchesre talking about before. And everything here, OEM construction, it's very reliable as a replacement or if you're adding one from the start. Now, if you're adding one and you don't wanna do the installation, or even if you already have one and you don't wanna tackle the installation, you can reach out to us here at etrailer.
On our website we have a dealer locator tool. You can find someone in your area based on your zip code that can do the installation for you if you don't wanna tackle it. And as always, you can reach out to us here at etrailer for more questions about this or any other product. And that will wrap up our quick look together. I'm Steven. Thanks for watching.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Quality seems par as far as rv parts go. Would had given 4 stars but it did not come with fasteners. Maybe it said that in the description but I missed that.
Better than expected, I especially like that the inside portion had a wider lip than the original and the outside (on top of trailer) had more mounting holes and spaced adequately so I didn't have to try and use the holes from the old skylight.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.