bing tracking image
  1. Ladder Racks
  2. DeeZee
  3. Over the Bed
  4. Truck Bed
  5. 500 lbs
  6. No Drilling Required
Invis-A-Rack Folding Ladder Rack - Black Powder Coated Aluminum - 500 lbs
DeeZee

Invis-A-Rack Folding Ladder Rack - Black Powder Coated Aluminum - 500 lbs

Part Number: DZ951800
In Stock
$1,079.66
Retail:$1,360.02
You Save: $280.36
Ladder Racks

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

This ladder rack is there when you need it and out of the way when you don't. The rustproof aluminum rack hauls long loads and then folds down for storage on your truck bed side rails. Great if you use a fifth-wheel or gooseneck hitch. Fastest Shipping and Great prices for Invis-A-Rack Folding Ladder Rack - Black Powder Coated Aluminum - 500 lbs. Read our customer reviews of DeeZee ladder racks. Call 1-800-940-8924 for expert service or order your ladder racks part number DZ951800 by DeeZee online at etrailer.com.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Photos

DeeZee Ladder Racks - DZ951800

Highlights

  • Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
  • Folds Out of the Way: Rack collapses into bed-rail cases for full bed access in seconds.
  • Handles Heavy Loads: 500-lb capacity carries ladders, lumber, kayaks, or pipes with ease.
  • Rustproof Build: Extruded aluminum with black powder coat resists corrosion and wear.
  • Clamp-On Install: Secures with included heavy-duty clamps—no drilling required.
  • Built-In Storage: Two small boxes on each rail keep straps and tools within reach.
Made in USA

Features to know about

Pop-Up Utility Rack: Folds Away When You Don’t Need It

The Invis-A-Rack Folding Ladder Rack is built to be there when you need it and disappear when you don’t. The uprights fold down and store inside the built-in bed rail cases, so you can switch from work to play in seconds. When raised, the rack supports up to 500 lbs, giving you room for ladders, lumber, or long gear. When folded, it stays flush with the rails for a clean, low-profile look that won’t get in the way of hooking up a fifth-wheel or gooseneck trailer.

DeeZee Invis-A-Rack ladder rack showing right front upright raised on truck bed

DeeZee Invis-A-Rack ladder rack with right front upright and crossbar raised on truck bed

DeeZee Invis-A-Rack ladder rack with both front uprights raised on truck bed

DeeZee Invis-A-Rack ladder rack with both front uprights raised and crossbars connected

DeeZee Invis-A-Rack with front and rear uprights raised on truck bed

DeeZee Invis-A-Rack fully assembled with front and rear uprights raised and crossbars connected

Strong Yet Lightweight: Rustproof Aluminum with Black Powder Coat

This rack is made from extruded aluminum that’s both sturdy and lightweight, so it won’t weigh your truck down or rust out over time. The textured black powder coat adds another layer of protection and blends in neatly with your truck bed trim. It’s tough enough for job-site use but refined enough that it doesn’t stand out when folded away.

Built-In Storage: Handy Rail Cases Keep Gear Within Reach

Each bed rail case hides more than just the folding arms. Inside the center of each case is a small storage box—perfect for keeping bungee cords, tie-downs, or small tools ready to go. The cases measure 3-1/2" wide x 3" tall, with center storage boxes that are 27-3/4" long x 3-1/4" wide x 2-3/4" deep, so there’s room for all the small essentials that usually rattle around your bed.

Inside view of DeeZee Invis-A-Rack bed rail storage cases showing folded uprights

Outside view of DeeZee Invis-A-Rack bed rail storage cases mounted along truck bed rails

Better Efficiency and Easy Setup: No-Drill Installation

Because the rack folds down flat, it cuts drag and helps keep fuel efficiency higher than fixed racks. The lightweight aluminum design adds strength without adding extra fuel weight. Installation is quick with the included heavy-duty clamps—no drilling required. Foam strips cushion the rack bases against your truck’s bed rails, and one person can install it in about 10 minutes.

Work or Weekend Ready: 31" Uprights with 69" Crossbars

At full height, the uprights rise 31" above the bed rails and the crossbars span up to 69", giving you the reach and clearance to handle long materials or outdoor gear. Strap down a kayak, canoe, or hunting equipment with compatible accessories (sold separately), then fold it all away when it’s time to relax.

Pickup truck using DeeZee Invis-A-Rack to carry ladder and pipe

Pickup truck using DeeZee Invis-A-Rack ladder rack to carry a canoe

Specs

Application

  • Application: pickup trucks with 8' beds

Animated demonstration showing DeeZee Invis-A-Rack Folding Ladder Rack raising and lowering on a pickup truck bed

Weight and Capacity

  • Weight capacity: 500 lbs

Dimensions

  • Bed rail storage case dimensions: 3-1/2" wide x 3" tall
  • Upright height (above bed rails): 31"
  • Center storage box dimensions: 27-3/4" long x 3-1/4" wide x 2-3/4" deep

Warranty

  • Limited lifetime warranty

Note

  • The Invis-A-Rack can't be used with accessories that mount in your truck's stake pockets or on your truck bed side rails. Certain tonneau covers, toolboxes, and bed rail caps will not be compatible with this ladder rack.

DZ951800 Invisarack Fold Down Truck Bed Rack - Black Powder Coated Aluminum - 500 lbs Capacity - Invisirack, Invisi-Rack



This Product Fits The Following Vehicles




Ratings & Reviews

4.4

16 reviews
Review sort icon
This ladder rack is there when you need it and out of the way when you don't. The rustproof aluminum rack hauls long loads and then folds down for storage on your truck bed side rails. Great if you use a fifth-wheel or gooseneck hitch.

by:



by:



by:



by:



by:



by:



by:

1 year and still love it. Quality product



by:

This Rack is Awesome, loaded a bunch of 16'x7" board's from the lumber yard. And it didn't squeak, Rattle or flex around one bit. As if they were not even up there. Very pleased with it!



by:

The direct shipment was boxed much more carefully and did not appear to have any shipping and handling damage like the previous delivery.
It is very unfortunate though, that at this price point, the product requires so much hand tuning to make work.
I realize now upon further inspection that the "in use" pictures show the black mounting hardware and the factory pictures show the unpainted bare aluminum hardware..... So all the mounting hardware had to be painted black to match the rack.
Again, half of the plastic in place arrived broken.
The keyhole slots in which the plastic end/joining plates insert into were not milled or formed correctly on any of the four pieces of the folding rack, all had to be hand tooled to fit and then repainted.
The product is advertised as black powder coated, but not only is the interior but also parts of the exterior are not fully powder coated.
Lastly there are nicks and dings on the exterior casing of the rack.
So all in all... After two shipments and $xxx I guess this is simply the level of quality we get.... It's unfortunate and I'm unpleased with the product in general. I need this product though at the moment, so it is now installed.



by:

So far, so good. It arrived on time. The only things broken were two of the plastic "insert" pieces that go between the rails, but thankfully I only have a 5 1/2' bed, so I didn't really need them. I had it installed by the mechanics I was taking my truck to for other work and they said it installed pretty easily and one of the mechanics is going to get one for his own personal truck. We practiced setting it up and taking it down before I left. I can definitely do this on my own. I absolutely LOVE this product. I didn't want something that "whistled in the wind" or created drag every day even when I wasn't hauling the kayaks, so this is perfect. Thank you!



by:

Great product. I use it to haul kayaks and lumber. It's surprisingly strong and sturdy. I put 300 lbs of lumber on it and never heard so much as a squeak. Installation was straightforward. I'll definitely buy another one for my next truck.



by:

I love that I don’t have to find a place in my garage to store this rack, and remove and replace it with each use. It’s fairly easy to load and tie down my canoe single-handed. The loaded rack is quiet and feels secure at highway speeds and on rough roads. Set up and take-down is quick and easy, and the bed-rail look is unobtrusive. The product has met my expectations in every way. Thanks.



by:

Very pleased. Exactly what we expected. Only issue is the driver side back plate that is glued on came off and is gone.



by:

Easy to install and looks clean!



by:

It will do the job. The fastening leaves a lot to be desired. I will have to put additional fasteners (bolts or screws) to make it a secure mount. the Center pieces are only held in place by little plastic end caps which are cheap and will not work. With the additional fasteners I feel like it will be fine but a bit overpriced for what it is.



by:

Super product! Well constructed, sturdy, and easy to put together/install. Looking forward to receiving/using my other etrailer purchases and future sourcing from them.

Captain A. profile picture

Captain A.

8/28/2019

Couldnt be more pleased. Two end caps fell off due to inadequate gluing but DeeZee, after a single call, promptly mailed me two more. Great product support!!


16
16

See what our Experts say about this DeeZee Ladder Racks

  • Is DeeZee Invis-A-Rack Compatible With Tonneau Cover on 2018 Ram 2500
    Hi Adrian; the Invis-A-Rack # DZ951550 (6-1/2' bed) and # DZ951800 (8' bed) are not compatible with any available tonneau covers. There was a time where TruXedo made one for this rack but it has been discontinued for a while now. If you want to use this ladder rack on your 2018 Ram 2500 you won't be able to use a tonneau cover. If you want a ladder rack that is tonneau cover compatible it needs to be one that mounts to the top of the bed rails. I recommend one of the following: -Adarac...
    view full answer...
  • Can The DeeZee Invis-A-Rack Ladder Rack Be Paired With A Retractable Tonneau Cover
    Hey chancy, The Invis-A-Rack Folding Ladder Rack # DZ951800 uses clamps to mount to the inner lip of the bedrails, which is where the tonneau cover would need to sit. With this style ladder rack you would not be able to use a tonneau cover. There are other options though like the Pace Edwards JackRabbit Retractable Tonneau Cover w Contractor Rig Rack # JEF3042-CR4005. Is this something you'd be interested in or is there a certain style of ladder rack you're looking for?
    view full answer...
  • Ladder Rack And Tonneau Cover Option For 2015 Ford F-250 Super Duty
    The DeeZee Invis-A-Rack Folding Ladder Rack that you need for the 2015 Ford F-250 Super Duty 8 foot bed is part # DZ951800. The DeeZee Invis-A-Rack Folding Ladder Rack part # DZ951600 fits the 6-3/4 Foot Bed. There used to be a TruXedo Lo Pro Soft Tonneau Cover made specifically for use with the Invis-A-Rack Folding Ladder Rack on the Ford F-250 long bed however it is no longer in production if that is what you are referring to. I recommend Adarac Pro Series Custom Truck Bed Ladder Rack...
    view full answer...
    Image 1 for
  • Roof Rack To Install On Hard Shell Tonneau Cover
    If you are looking for a rack system to install on top of a hard shell tonneau cover then I do have an option for you in the Rhino-Rack Aero Bar Roof Rack for Camper Shells part # Y02-480B. This system has tracks so you can adjust the crossbar spread to any given load and the aero shaped crossbars will accept pretty much any roof mounted accessory. Unfortunately, there is not enough support to mount the Invis-A-Rack Folding Ladder Rack part # DZ951800 on a hard shell tonneau cover.
    view full answer...
    Image 1 for
  • Truck Ladder Rack for a 2018 Ram 2500 that Allows me to Load a Four Wheeler
    The Invis-A-Rack Folding Ladder Rack part # DZ951800 for 8' beds or part # DZ951600 for 6.5' beds without the RamBox will be the perfect solution. This allows you to pull in your quad then raise the rear crossbar to load up you kayaks on to. I have linked a video for you to check it out.
    view full answer...
  • Invis-A-Rack Ladder Rack Compatibility With A Recoil Tonneau Cover On A 2022 Ram 3500 8ft Bed
    The Invis-A-Rack Folding Ladder Rack - Black Powder Coated Aluminum - 500lbs # DZ951800 is designed to clamp to the inner lip of the bedrails of your 2022 Ram 3500 so it would not be compatible with the tonneau covers you refenced. For a rack that would mount in the stake pockets of your bedrails I recommend the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500lbs # A86FR. The foam-padded utility rails mount to your vehicle's bedrails with the included aluminum stake...
    view full answer...
  • Is Invis-A-Rack Folding Ladder Rack Compatible with BAK Roll-X Tonneau Cover on 2010 Toyota Tundra
    The Invis-A-Rack Folding Ladder Rack # DZ951800 uses clamps for installation on your truck side rails which will interfere with basically any tonneau cover out there (I have yet to hear of one that installs without using the side rails), including the BAK Roll-X. While we do have ladder rack solutions that do not use the clamp system, this is a very common style of mounting used for ladder racks and the #1 reason why most ladder racks aren't compatible with most tonneau covers. I reached...
    view full answer...
  • Compatibility of DeeZee Invis-A-Rack Folding Ladder Rack DZ951800 with Tonneau Cover
    The DeeZee Invis-A-Rack Folding Ladder Rack # DZ951800 mounts on top of your Silverado's bed rails so if you installed it using screws, rather than the included clamps, it would be compatible with a tonneau cover that uses mounting hardware that sits inside the rails. My contact at DeeZee said this method would probably work so long as your hardware had a low enough profile so as to not interfere with the folding of the rack arms. They have not tested this installation process, however,...
    view full answer...
  • Fit of DeeZee Invis-A-Rack on 2014 Toyota Tundra with OEM Bed Rail System
    We do have a ladder carrying solution for your truck, although the Invis-A-rack wouldn't work. According to DeeZee, the Invis-A-Rack is not compatible with the Toyota Tundra models equipped with the bed track system. The Invis-A-Rack mounts to the top of the bed rail, but the clamps that attach it to the vehicle need to pass through to the underside of the bed rail. The presence of the bed rail system prevents access to the underside of the bed rail, leaving the clamps no way to attach. TracRac...
    view full answer...
  • Does DeeZee Invis-A-Rack Ladder Rack Fit 2015 GMC Sierra 2500HD
    Yes, as long as your 2015 GMC Sierra 2500HD has a 6-1/2 foot bed the DeeZee Invis-A-Rack Ladder Rack part # DZ951600 is a fit and will work well. If instead you have an 8 foot bed you'd want the # DZ951800 instead as this is the long bed version of the same ladder rack.
    view full answer...
  • How Long are the Crossbars on DeeZee Invis-A-Rack Ladder Rack for a 2016 Chevy Silverado 2500
    I spoke with my contact at DeeZee about the Invis-A-Rack # DZ951800. She stated that the maximum length of the crossbars on the rack is 69 inches so that is more than enough room for your 51 inch wide Jon boat. I have linked a video featuring this ladder rack for you.
    view full answer...
  • Color of Crossbars on Rola 59799 Haul-Your-Might
    It's hard to see in the photos, but the crossbars provided by the Rola # 59799 Haul-Your-Might ladder racks are what I'd call a dark gray or gunmetal color with a black rubber strip running down the center. The remainder of the ladder rack is black in color. Rola doesn't offer a ladder rack with crossbars that are entirely black, but we do offer some alternatives that are available in all black: • Buyers Products Ladder Rack with Load Stops, part # 3371501680. If your truck as the rail...
    view full answer...
  • DeeZee InvisaRack Truck Bed Ladder Rack Recommendation for a 2001 Ford F-250
    Yes, as long as the length of the truck bed on your 2001 Ford F250 is 6-3/4 feet long the Ladder Rack part # DZ951600 would fit your truck, if you have an 8 foot long truck bed you would want the part # DZ951800.
    view full answer...
  • Recommended Ladder Rack for 2014 Dodge Ram Pickup for Transporting 20-Foot Steel Pipe
    We offer many ladder rack kits for your 2014 Dodge Ram Pickup that you can see on the linked page such as the aluminum Erickson # EM07705 which includes load stops. We also have the Invis-A-Rack Folding Ladder Rack rack # DZ951800 from Dee Zee which fits long beds and that folds down for convenient access to a 5th wheel hitch. To see racks suitable for your truck just use the Select Vehicle Style drop-down menu tool at the top of the page to select your truck version. You'll then see the...
    view full answer...
  • Ladder Rack Recommendation for 2016 Ford F-250 Short Bed with Tonneau Cover
    Since you have a tonneau cover on your 2016 Ford F-250 the best we can do is a sliding ladder rack since none of the folding ones will fit. Reason being the folding ones all clamp around the inside of the bed rail where your tonneau resides. Only option we have is the TracRac Sliding Rack part # TH43003XT-510.
    view full answer...


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Alex H
Updated by:
Alex H
Employee Michael B
Updated by:
Michael B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.