bing tracking image
  1. Trailer Door Holders
  2. JR Products
  3. Plunger and Socket
  4. 4-3/4 Inch Long
  5. Metal
  6. Rubber
Plunger and Socket Door Holder for RV or Enclosed Trailer - 4-3/4" Plunger - Zinc Plated Steel
JR Products

Plunger and Socket Door Holder for RV or Enclosed Trailer - 4-3/4" Plunger - Zinc Plated Steel

Part Number: 37210294
In Stock
$13.40
Retail:$27.45
You Save: 51%
Trailer Door Holders
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Keep your trailer door open while loading and unloading with this 4-3/4" long plunger-and-socket door holder. Plunger slides into rubber socket to hold door in place. Zinc-plated steel plunger resists corrosion. Mounting screws are included. Great Prices for the best trailer door holders from JR Products. Plunger and Socket Door Holder for RV or Enclosed Trailer - 4-3/4" Plunger - Zinc Plated Steel part number 37210294 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (72)
  • Q & A (0)
  • Videos (1)
  • Photos

JR Products Trailer Door Holders - 37210294

  • Plunger and Socket
  • 4-3/4 Inch Long
  • Metal
  • Rubber
  • Straight
  • JR Products
  • 2-1/8 Inch Hole Spacing
  • 2-3/4 Inch Hole Spacing

Keep your trailer door open while loading and unloading with this 4-3/4" long plunger-and-socket door holder. Plunger slides into rubber socket to hold door in place. Zinc-plated steel plunger resists corrosion. Mounting screws are included.


Features:

  • Plunger-and-socket door holder keeps your RV or trailer door open while you're loading and unloading
    • No need to get a friend to hold the door or find something to prop the door open
  • Plunger arm slides into rubber socket to hold the door in place
    • No need to manually latch and unlatch like with other holders
  • Zinc-plated steel plunger is corrosion resistant
  • Mounting screws are included


Specs:

  • Dimensions:
    • Plunger arm length: 4-3/4"
    • Plunger bracket: 1-1/2" tall x 3" wide
    • Receiver bracket: 2" tall x 3-1/2" wide x 1" thick
    • Mounting hole diameter: 3/16"
    • Distance between mounting holes (center to center):
      • Plunger bracket: 2-1/8"
      • Receiver bracket: 2-3/4"
  • Lifetime warranty


10294 JR Products 4-3/4" Straight Plunger Door Keeper





Video of Plunger and Socket Door Holder for RV or Enclosed Trailer - 4-3/4" Plunger - Zinc Plated Steel
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for In-Depth Review of the Plunger and Socket Door Holder for RV or Enclosed Trailer

Ellen: Hey everyone, I'm Ellen here at etrailer.com. Today, we're taking a quick look at the JR Products Plunger and Rubber Socket Door Holder. So this is going to help to keep your door open, especially if you're loading in things to your RV or your camper, things like groceries, luggage, kids, whatever the case might be. So this is going to help to keep that door open so you can keep loading things in without having to use your hands and help to prevent that door from coming back at you. So this is going to have a two piece design, we'll have our plunger, and then the socket here that this is going to fit into. So that rubber socket it just rests in place there, but basically that's just going to push in and a pretty good amount of tension put on there.

So that's going to keep your door nice and secure, and then it's just a matter of pulling it out to release that back.So as you use it, it'll probably get a little bit easier so you don't have to fight it quite so much, right now that rubber is still fairly tight, it's going to hold pretty well, so it'll probably take a little bit of force, a little bit of wearing down before it gets a little bit easier there. It does come with the hardware to get that mounted up so you don't have to worry about finding anything extra to go with this. As far as the size, our socket side is going to be about three and a half inches long from edge to edge. And then about two inches wide, maybe about two and an eighth inch, and then it's about an inch deep. That rubber socket does fit in there, it is a little bit taller than our bracket, so you might have to coax it into the wall or wherever you mount it up to, to get it to go flat, or it might be a little bit away from the wall when you mount it up depending on how tight you get that mounted in there, but just something to keep in mind.As far as the other side, the base is going to measure about three inches, about three inches and an eighth, and then about one and a half inches wide.

That plunger coming out of there is about five inches long. This is going to be made of a zinc plated steel, so we shouldn't have to worry about too much rest or corrosion over time, it is covered by a lifetime warranty from JR Products. And that's pretty much going to do it for our look at the JR Products Plunger and Rubber Socket Door Holder. If that rubber part happens to wear out on you, that is replaceable, it is sold separately. So you can change out the rubber piece that haven't replace the whole kit and that's it.

Thanks for watching.

Ratings & Reviews

4.7

72 reviews
5 Stars
(55)
4 Stars
(13)
3 Stars
(3)
2 Stars
(0)
1 Star
(1)
Review Sort Icon
by:
Follow up support is amazing.
by:
Very good customer service, he helped me find what I was looking for. The item was not show on the website. Placed the order, and received it a few days later. Looks like it will do what I need it to.
by:
Arrived it good condition I have yet to install
by:
by:
by:
by:
by:
Everything replaced the original worn-out parts perfectly. Very easy to install.
Will definitely order replacement parts again.
by:
Easy to install and strong enough to have worked for over a year.
by:
These screws hole were just barely off enough to make the installation for this absolutely horrible!
by:
They do the job and I really only needed the rubber parts and they weren’t available. Thanks to the pandemic. when they needed replacing I had to buy new ones to just to get the rubber part. But they work great for many seasons. You can see them holding the barn doors open on our caravan.
by:
Works great, easy to install. I like how the rubber bushing can be replaced by itself when it wears out.
by:
Super quick service and delivery!
by:
This was a replacement for an old one on an OLD camper, it works just fine. It was difficult getting the post into the rubber socket until I applied some plumbers stem grease (This is designed to be used in wet environments and will not harm rubber. It might be beneficial if a tiny package of this was included with the item - it just takes a drop or two.
Howard profile picture

Howard

6/25/2022

Still works great after a year.

by:
Just what I needed to keep that darn tack room door on my horse trailer propped open! The manufacturer’s original was straight instead of angled, so the pin did not catch properly. E-trailer came through again (I have ordered before), and in spite of shipping delays because of the COVID virus, my order arrived in less than a week.
by:
I love this company and they are the only people i order from for my camper. I have an 84 lance camper that i have completely refurbished and they have been the only company i can still find the parts for. Their communication is great, easy process to find the parts and very quick shipping. Not only that but they follow up with you to make sure everything was delivered and that you're happy. Awesome company !! Thank you guys!
by:
Great service for sure. The product fit the bill. We are restoring an old 68 p10 van. This product was a factory part on this van. I was very surprise to findout it still exist and found it on your site farly easy. I will add etrailer to one of our sources.
by:
easy installation.
by:
Good quality,great service,availability of parts. Happy customer.
by:
exact replacement
by:
Fabulous got my order in short time...
by:
It will fit perfect.
Thanks
Randy profile picture

Randy

8/12/2022

Great

by:
ALL GOOD
Kimberly K. profile picture

Kimberly K.

11/18/2021

still good

by:
Install was easy and quick and the have lasted good in the west wind which a big plus thanks for a good product
by:
Works great! Not plastic so will stand the test of time and the brutal impacts of weather.
25
72
true
Show More Reviews

See what our Experts say about this JR Products Trailer Door Holders

Do you have a question about this Trailer Door Holder?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Installed by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Written by:
Mike S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924