1. Home
2. Trailer Parts
3. Trailer Door Holders

I attached a picture I got from Buyers Products that has the dimensions of the Buyers Products Hook and Keeper for Enclosed Trailer Door #BP64FR that has the dimensions you are looking for.

Hey Steve, the Replacement Toilet Seat part #LC48AF that you referenced is white in color.

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

Hey Steve, the schematic that shows the 645 mm measurement is for the #ORJW500D which is the Ark 500 Series Off-Road Jack. The answer that shows the 18" retracted length is referencing the #ORJW350D which is the 350 series jack and is smaller…

If you're wanting a roof rack on your 2003 Ford F-250/350 there will be some drilling required on any roof rack system. The Rhino Rack #Y01-120B comes with tracks which will install on your roof. Again, drilling required. Then you can use a kayak…

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…

We have a replacement plunger sockets that could potentially work for your horse trailer window. Check out the Nylon Replacement Socket part #DH600S. This part can also be used on windows and measures 7/8 of an inch tall. For a socket door holder and…

Thanks for the photo, and the best option for a door retainer that is stronger than a rubber door retainer is the plunger and socket style, which are more heavy duty and will allow your door to stay open while the wind blows. This style has gotten…

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye hole.…

I attached a picture I got from Buyers Products that has the dimensions of the Buyers Products Hook and Keeper for Enclosed Trailer Door #BP64FR that has the dimensions you are looking for.

Hey Steve, the Replacement Toilet Seat part #LC48AF that you referenced is white in color.

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

Hey Steve, the schematic that shows the 645 mm measurement is for the #ORJW500D which is the Ark 500 Series Off-Road Jack. The answer that shows the 18" retracted length is referencing the #ORJW350D which is the 350 series jack and is smaller…

If you're wanting a roof rack on your 2003 Ford F-250/350 there will be some drilling required on any roof rack system. The Rhino Rack #Y01-120B comes with tracks which will install on your roof. Again, drilling required. Then you can use a kayak…

I checked with Dexter and they indicate that for hub 008-386-80: "Available for service parts only." Meaning the actual hub assembly is not available but parts for it are such as the 35mm cartridge bearing #31-72-3. There isn't a way to…

We have a replacement plunger sockets that could potentially work for your horse trailer window. Check out the Nylon Replacement Socket part #DH600S. This part can also be used on windows and measures 7/8 of an inch tall. For a socket door holder and…

Thanks for the photo, and the best option for a door retainer that is stronger than a rubber door retainer is the plunger and socket style, which are more heavy duty and will allow your door to stay open while the wind blows. This style has gotten…

Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

The part number 072-097-00 is for a Dexter leaf spring. Our closest equivalent would be the 5-Leaf Double-Eye Spring item #e34SR. This is a 3,000 lbs spring that works with 6,000 lbs axles. It measures 25-1/4" long from eye hole to eye hole.…