Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your RV electrical cables safe and out of the way. This durable polypropylene design replaces your old or damaged cable hatch. Housing fits into a 2-7/8" cutout, and the sliding door lets you run cable out while the door is shut.
Features:
Specs:
How to Properly Measure for Cut-Out Dimension
There are two main dimensions you need to know when choosing a replacement access door or adding a new one to your RV:
The cut-out diameter is the width of the circle needed to ensure the access door mounts flush to the wall of your RV.
The mounting depth is the depth needed behind the mounting surface for the access door's hatch to properly fit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to be taking a look at the Valterra electric cable hatch for RVs. This is for use with RV electrical cables up to 30-amps. It does come with the installation putty tape and the necessary mounting hardware to get it installed. The mounting hardware is going to be painted on the ends to match the coloring of the cable hatch. Now, the main door does swing fully open for easy access, and it's got the sliding door right here that allows the cable to pass through the main hatch when it's closed, or that main door when it's closed. You can also close that all the way, and that's going to keep unwanted items out of the stored area when your cable is not being used. Taking a look at the overall dimensions starting with the overall diameter. It's going to measure about 4 1/4 of an inch.
The overall depth from very back to very front is going to be pretty close to 2 3/8 of an inch. This unit does require a cutout for installation. That cutout is going to need to have a minimum diameter of about 2 7/8 of an inch. This is black in color. Your mount hole separation, so it's going to have three mounting holes. All of those are going to be separated on center by 3 and 3/16 of an inch.
That's the separation that we have apart from each hole on center. This area right here is going to give us a diameter of about 3/4 of inch. The main opening is going to give us a diameter of about 2 and 5/8 of an inch with an internal depth of pretty close to 2 inches. That's going to do it for today's look at the Valterra electric cable hatch for Rvs.
Ratings & Reviews
Sarah
6/14/2025
Product is working excellent after a year. Still closes firmly and maintains the seal so I don’t get water in my basement when I have my Sterling set up.
Nick S.
6/16/2025
Steven
4/6/2022
Super clean pass through tough fans looks great too
Mark
7/8/2026
It works well for the application I was using it for.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave
10/29/2025
I had to add velcro-tape to keep the hatch closed during travel, otherwise the wind would open the hatch.