Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your RV electrical cables safe and out of the way. This durable polypropylene design replaces your old or damaged cable hatch. Housing fits into a 3-1/2" cutout, and the sliding door lets you run cable out while the door is shut.
Features:
Specs:
How to Properly Measure for Cut-Out Dimension
There are two main dimensions you need to know when choosing a replacement access door or adding a new one to your RV:
The cut-out diameter is the width of the circle needed to ensure the access door mounts flush to the wall of your RV.
The mounting depth is the depth needed behind the mounting surface for the access door's hatch to properly fit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Valterra electric cable hatch for RV's. This is for use with RV electrical cables up to 50 amps. It does come with the installation putty tape, and the necessary hardware. Now the screw heads are painted to match the color of the hatch, so it gives it a really nice clean overall finished appearance. The hatch door is able to swing open for easy access. Really nice design, snaps in the shut position. Very secure. Then it's got the sliding door right here that allows the cable to pass through with the main hatch door closed. With that closed, it's also going to keep unwanted items out of the stored area when the cable isn't being used. Take a look at the overall diameter, measuring edge to edge, we're looking at about five and one eighth of an inch.
Overall depth is going to be about two and five eighths of an inch deep, very front to very back. Diameter here is just under three and a half inches, so it does require a cut-out for the installation, and the cut-out diameter needs to be around three and a half inches. You can see that the unit's black in color. It's made from a strong and durable plastic construction. When it comes to the mount hole separation, there's going to be three mount holes on the unit. Going center on center, they are going to be separated by looks to be about three and seven eighths of an inch.
That's going to be the same for each hole separation, again, center on center. This small hole right here has an up and down measurement of about one inch. That's the opening. Side to side it's going to be about one inch as well, and then the large hole has a diameter of three and one quarter inches, and then that's going to have a depth of around two and three eighths of an inch. That's going to do it for today's look at the Valterra electric cable hatch for RV's.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Allen
10/28/2022
The inner flap fingers which the cord passes through have broken off. I guess they were made a little thinner than the original cable hatch.
Steven
4/6/2022
Super clean passthrough tough and looks great too
Do you have a question about this RV Access Door?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mark
7/8/2026
It works well for the application I was using it for.