Want sufficient lighting in your RV hallway for those nighttime bathroom trips? We got you. This warm white puck light has a built-in dimmer - so the light can be bright enough for you to see, but not so bright that'll wake everyone up.
Features:
Specs:
This puck light has warm white LEDs that give you extra light underneath your kitchen cabinet for meal prep, in the hallway for nighttime bathroom trips, or over a chair for reading. And the integrated dimmable button on the front lets you increase the light's brightness to play a card game or decrease it to remove screen glare for movie night.
LEDs are energy efficient and draw minimal power, so the light won't drain your battery, overload your circuits, or produce too much heat. And unlike incandescent lights, you won't have to worry about replacing bulbs that have brittle filaments.
To access the bolt holes, pull the lens off the housing. Using the included screws and wire nuts, bolt the housing onto the surface of your RVs ceiling or wall before snapping the lens back on. The 2-wire design hooks up to ground (white wire) and power (black wire), and it has built-in polarity correction that'll make sure the light will operate consistently, even if its accidentally wired backwards.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. Let's take a real quick look together at the surface mount 12-volt RV LED Puck light. Now, this puck light is gonna be perfect for underneath an RV kitchen cabinet or inside a closet in your RV. It's going to dim with the push of a button. Let me show you that here real quick.
And you'll just hold that center button down until you get to your desired brightness. So you can see it's slowly dimming. And I think that's at the lowest point. Let's take a closer look here, and then I'll hold it down again, and that's going to brighten it up, as you can see here. So you see just how bright this is with my bright studio lights on.
But lemme go ahead and turn my studio lights off here just to give you a better demonstration. I'm gonna go back out to my wide view. Kind of looks like a glowing dot here in the screen, but you can see that it does a pretty good job of shining on my tabletop, lighting it up pretty well. And lemme go ahead and shine this on the wall behind me. So it puts out quite a bit of light for what it is.
It has a maximum light output of 260 lumens. So this does include these energy-efficient, warm, as you can see, it's a warm light that's put out. So the energy efficient LEDs are gonna be something that you're not gonna have to worry about. They're gonna be very long-lasting, longer than typical incandescent bulbs. And so again, output of 260 lumens, and that switch there is going to allow you to, if you hold it down, dim it.
It's hard to see the switch because this is lit up, but as you can see, it's dimming. And then hold it down again. It's gonna brighten up just like that. So that's really pretty cool. It's a great feature that's built in. Turning my studio lights back on here. You hit that button once, it's gonna turn it off. Now you can see that button. Hit it again, it's gonna turn it back on. So, real simple operation. This does have a two-wire design. Lemme go ahead and disconnect this from my 12-volt power. So the black wire is going to be your power. The white wire is gonna be ground. The wire length I'm guessing is about 11 inches or so. And so this is gonna be very easy to install. You'll just take this cover off here and use the included hardware to get this mounted to wherever you would like it. And then you'll secure the lens then back over it. Now, lemme go ahead and give you some measurements in case you we inchesre wondering. So, looking at the overall diameter, looks like we're sitting right at 4 1/2 inches. The thickness might be kind of tricky to show, but maybe let's call it at about almost an inch, maybe 3/4 of an inch thick. And then the mounting, the mounting holes on center, looks like we're sitting right at three inches. That's gonna be true all the way around there. And like I said, it does include the hardware. So I think this is gonna be a pretty easy install for you. It's gonna put out quite a bit of light and it's gonna be very easy to control and it's nice that it's dimmable as well. If you do pick this up, we would like to hear back from you regarding your experience with getting this installed and using it. You can share your experience with us by dropping a comment or leaving a review on this product page. We'd like to see pictures of this as well. You can drop pictures in a review so we can see what this looks like all lit up. If you have any other additional questions, don't hesitate to give us a call. We would love to help you out further. I know we have other sizes of this, at least one other size available, maybe more, so you can take a look at those other options here at etrailer.com. Well, that's gonna wrap up our quick look today. I do hope that our brief time together has been illuminating for you. Again, my name is Andy. Thank you for joining me.
Work great, great communication, reasonable time for delivery.
Just installed - worked fine- exactly what I needed
service was excellent, I was notified right away you were out of the item I needed, made a phone call and the lady I spoke to was VERY helpful in finding a replacement part.
The delivery of the Puck lights was right on time and installation was very easy. We replaced 4 standard (and very bright) puck lights with these and are very pleased!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.