bing tracking image
  1. RV and Camper Steps
  2. Stromberg Carlson
  3. 1 Step
  4. Pull-Out Step
  5. Towable Camper
  6. 24 Inch Wide Step
Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 24" Wide - 300 lbs

Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 24" Wide - 300 lbs

Item # SMFP-1100
lowest price pledge
Our Price: $143.21
You Save: $24.82
RV and Camper Steps
This item qualifies for Free Shipping
Shipping Weight: 17 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Kathleen M

Is this right For you? Product Expert Kathleen M says:

Yes, if you:

  • Camp in areas with lots of gravel or sand that you don't want to track into your RV
  • Have a trailer or vehicle that you struggle to get in and out of and need to add a straightforward step to bridge the gap
  • Have an entry height (distance from the ground to the mounting point) of 14-1/2" - 17-1/2" and a mounting place that's at least 25" x 12"

No, if you:

  • Have a hard time with bending over and pulling out steps, and would rather have an electric step
  • Get annoyed when you have to supply your own hardware and want everything you need in the box
  • Have limited space behind where the step will mount - the brackets that the step moves on can get hung up
This 9" deep, pull-out step lets you safely enter and exit your RV. Slip-resistant step slides effortlessly into its mounting base and locks into place for travel. Bolts or welds onto your RV. Black powder coated steel is rust resistant. Lowest Prices for the best rv and camper steps from Stromberg Carlson. Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 24" Wide - 300 lbs part number SMFP-1100 can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (538)
  • Q & A (0)
  • Photos
  • Why etrailer?

Stromberg Carlson RV and Camper Steps - SMFP-1100

  • 1 Step
  • Pull-Out Step
  • Towable Camper
  • 24 Inch Wide Step
  • Stromberg Carlson
  • 25 Inch Wide
  • Steel
  • 7-1/2 Inch Drop/Rise
  • No Ground Contact

This 9" deep, pull-out step lets you safely enter and exit your RV. Slip-resistant step slides effortlessly into its mounting base and locks into place for travel. Bolts or welds onto your RV. Black powder coated steel is rust resistant.


  • Manually operated RV step makes it easy to get into and out of your motor home
    • Simply pull step out for use and position back in place for travel
  • Non-slip surface with oval tread holes provides sure footing
    • 1-1/2" Wide strip of grip tape on edge of step offers additional traction
  • Rust-resistant black powder coated steel is strong and durable
  • Easy bolt-on or weld-on installation
    • Mounts to RV frame in same manner as original step
    • Mounting hardware not included
  • Made in the USA


  • Entry height: 14-1/2" - 17-1/2"
  • Step dimensions: 24" wide x 9" deep
  • Mounting bracket dimensions: 25" wide x 7" tall x 6" deep
  • Drop/Rise: 7"
  • Weight capacity: 300 lbs
  • 1-Year warranty

STCL 1100 Dims

STCL 1100 Dims 2

STCL 1100 Dims 3

Will Flexco Pull-Out Steps Work for You?

Pull-out steps are typically installed on travel trailers. The Flexco pull-out steps from Stromberg Carlson are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.

Mounting Bracket Stromberg

The Lippert pull-out steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 25" wide and 6" deep.

If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 21-1/16" wide to 28-1/4" wide. A full list of the available steps is below.

Outriggers for RV Steps

Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.

Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.

How Many Steps Do You Need?

Entry Height Stromberg

To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 3" to 9" to account for the drop from the bottom steps to the ground. This measurement will also tell you how many steps you need.

The chart below displays mounting bracket width measurements in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.

This page's step assembly is in bold text.

Mounting Bracket Width Entry Height Part Number
21-1/16" 14-1/2" - 17-1/2" SMFP-1120
23-5/8" 19" - 22" SMFP-2120
24-1/4" 10-1/2" - 13-1/2" SMFP-1220
25" 14-1/2" - 17-1/2" SMFP-1100
26" 19" - 22" SMFP-2100
27-1/8" 30" - 33" SMFP-3200L
28-1/8" 26" - 29" SMFP-3100
28-1/8" 34" - 37" SMFP-4400
28-1/4" 10-1/2" - 13-1/2" SMFP-1200

How Do You Install the Steps?

To install the steps:

  1. Make sure the camper is level on flat ground
  2. Lift the steps into the mounting space and prop into place
  3. If needed, mark the mounting holes on the camper and drill

    -Set aside steps before drilling

  4. If needed, install the outriggers
  5. Align step mounting holes and secure in place with carriage bolts and flange lock nuts

    -Make sure the bracket is backed up fully against the I-beam on the chassis

    -Hardware not included

  6. Tighten hardware until snug
  7. Make sure assembly is sitting square and level
  8. Torque the hardware tight

SMFP-1100 Stromberg Carlson Flexco Manual RV Step - One - Black - Folding - 24 Inch

Similar to Hickory Springs 9512450RXWAC1

California residents: click here

Customer Reviews

Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 24" Wide - 300 lbs - SMFP-1100

Average Customer Rating:  4.8 out of 5 stars   (538 Customer Reviews)

This 9" deep, pull-out step lets you safely enter and exit your RV. Slip-resistant step slides effortlessly into its mounting base and locks into place for travel. Bolts or welds onto your RV. Black powder coated steel is rust resistant.


am using these to go under service bed boxes. they will work, but the 3" drop ones are much better for this application. gonna see if i can return the 7" drop one and get a couple more of 3" ones. are probably just fine for a camp trailer, though.


Quality product, perfect for our needs. This was shipped quickly, nicely packaged and easy to install. 5 Stars all the way.


Great step.... I bought one a few weeks ago for my flat bed loved it love much I bought one for the other side. Ha


The step is well built and very sturdy. It came with the slip strip on and is just well built and price was very fair. It was simple installation. We had it on the day it was delivered. Great communication with etrailers on shipping from Manufacturer. Thank you


We purchased a used C-Class without a step. This step worked great. Looks great also. Was easy to install. E-trailer delivered as promised and had the best price. Do not need an outside step to get in RV.


I chose not to rebuild an electric step as it gets very expensive. I saw this Flexco manual step for only $45 and decided this was the fix I would go with. A manual step flips in and out quickly and easily, I don't have to fumble with a switch and wait for a pokey motor to fully extend it. The Flexco step is much lighter than the electric step, way less parts to fail. It is made of heavy gauge steel, is fat man friendly and maneuvers flawlessly. The Holes didn't line up perfectly with the bolts on my motorhome but why would they? I didn't expect them too and the spacing is clearly marked in the description. I was fortunate in that the Flexco slid over the base plate from the existing step. I cut the pieces from that base plate and bolted the Flexco to it then bolting the base plate back onto the motor home. This Flexco was the least costly option I found. I'm happy with it. The perforations in the step surface will add traction and allow rain, mud and sand to fall through instead of being tracked. I have ordered from Etrailer before I was already happy with their efficiency and trusted them.

Still holding up nicely, no electronic parts to fail.
gator - 12/11/2017


Had to modify the step to fit my Jayco Jay Feather 23B. A little cutting and welding and the step works great.


My second attempt at securing replacement steps for my rv, the first one had wrong configuration, this second one o cannot entirely lock the step in place because of the trailer frame. It kinda hangs there half locked half unlocked. I guess it will be ok .


My company is building a custom outdoor kitchen trailer for a customer. We needed a step that was both sturdy and able to stow away for travel. The Flexco step was the perfect fit for our needs. I look forward to ordering from etrailer again soon.

Hello, How high is the entry door off ground, also does the step leave plenty of clearance when installed? Thanks. I am building a mobile kitchen also.
-- comment by: Mark M - 09/09/2015

Mark M...I believe the floor height was about 16-17 inches off the ground. This step was almost perfectly mid way so it was well low step high step situation.
-- comment by: Wayne T - 09/10/2015


works great - going to order another for the back door.


received step and it was as described. step was mounted on a 1997 Itasca Spirit class C motorhome. The side to side bolt pattern on step was a about 2.5" narrower than side to side mounting bolts on my RV. front to back was the same. I just bolted 2 - 1" X 1/4 strap steal to RV. One across the 2 back bolts and one across the 2 front bolts then bolted step to the strap metal pieces. Since the step was as described I had the strap metal all ready to go when step arrived so mounting step was a snap and it works great. Now I don't have to haul around and extra safety step every where I go. My RV is only 21" and storage space is limited. YAAAAAA!!


Prompt delivery and best pricing.


I bought these steps for my vintage camper and they work great. Easy to install, and my wife can get in and out of the camper with no problem..


Mounted this at the escape door on my "too high to step up into" horse trailer. It has worked perfectly and always leaves me enough ground clearance even in the hill country.


Looks great, just as described on the add. I'll used it for a different application than an RV(Truck step). Do you manufacture smaller ones, less than 24"?


Well I have not had chance to install it yet Since I'm awaiting the new trailer to arrive. As for the steps. I opened box and first thing I noticed is that the slip grip self adhesions tape is half peeled off inside box. Not impressed n I haven't even impede the other box yet


This is a great product, it worked perfect for my needs, I welded it on my
1947 Mainline camper made by Spartin. I have bought many products from
Etrailer, they are a great company.


I am very pleased with the pull-out step that I bought last year for our 1983 Jayco Mini camper. It is sturdy and holding up well. The bolt holes matched up perfectly for installation.


Very sturdy, Paint has held up, good product we have purchased 2 for different trailers and both in really good condition


Product appears well-built and sturdy. I'll b bolting this on to my trailer this weekend.

Both products continue to work just fine and as expected. Happy with both purchases. Thanks for the follow up.
Bruce B - 01/26/2018


The step is very well made. Installation was very easy.
etrailer went above and beyond with shipping and delivery..
Very happy !!!


Excellent heavy duty well built step for my trailer. Easy to install and use. Fast shipping.


Nice item, not hard to install, the video explains everything you need to know about the item

Working very well after one year, thanks
Fred F - 07/28/2019


Mounted within minutes.
Would help if
a drilling template was included or printed on inner box lid.
Made my own and just finished drilling and taping the mounting holes on the trailer.
Product is sturdy. and works well.
With the 4" frame the step is still a little large (11-1/2").


etrailer shines on this one, the step got there 2 days earlier than expected and took about 20 min. to install (only because two of my old holes did not line up) it is very sturdy I am a bigger guy and I was worried that the wider step would have some flex in the middle but it is very solid, very happy with this product.

Show More Reviews

See what our Experts say about this Stromberg Carlson RV and Camper Steps

  • Mounting Bracket Dimensions of the Flexco Manual Pull-Out Step SMFP-1100
    The mounting bracket portion of the Pull Out Steps part # SMFP-1100 that you referenced is 6 inches long with a distance of 4-1/2 inches between mounting holes. From outside to outside of each bracket it measures 25 inches. From bolt hole center to bolt hole center it measures 23-1/4 inches. I attached a picture that has these dimensions and a few others for you to check out as well.
    view full answer...
    Image 1 for
  • What is Weight of RV Flexco Manual Pull-Out Step # SMFP-1100
    The total weight of the Flexco Manual Pull-Out Step # SMFP-1100 that you referenced is 17 lbs. Like you already noticed the weight capacity of it is 300 lbs. I attached a review video for this for you to check out as well.
    view full answer...
  • Single Step Replacement Recommendation For 2011 Jayco Pop Up
    The Flexco Manual Pull-Out Step for RVs - Single - 7" Drop/Rise - 24" Wide - 300lbs Item # SMFP-1100 is the only single step we carry with a bracket width of 25". You'll need to drill new bracket holes to bolt this step system into your camper. If you want a a two step system please let me know what your entry height is and I can recommend the correct step for your needs.
    view full answer...
  • Dimensions Of Flexco Manual Pull-Out Step For RVs SMFP-1100
    I had our warehouse measure the Flexco Manual Pull-Out Step for RVs # SMFP-1100 and from the center support to the top of the mounting bracket measure 3-5/16" as shown in the included diagram. I also included a few other diagrams with other dimensions for you to take a look at.
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Single Step Replacement for ETD 728 Elkhart Tool and Die Step
    For a single pull out step you could use to replace your ETD 728 Elkhart Tool and Die step you'd want the part # SMFP-1100.
    view full answer...
  • Will Flexco Manual Pull-Out Step Fit on John Deere Tractor
    The Flexco Manual Pull-Out Step # SMFP-1100 referenced in your question is designed for use on RVs but can be used for other applications. To see if this step assembly will work on your John Deere tractor, I simply recommend measuring the space you have available for which to mount it. The mounting base on this unit measures 25 inches wide and 6 inches deep. It features a bolt pattern of 23-1/4 inches wide and 4-1/2 inches deep. The drop/rise is 7-1/2 inches from the top of the mounting...
    view full answer...
    Image 1 for Image 2 for
  • Can the Flexco Manual Pull-Out Step for RVs # SMFP-1100 be Installed on a 2016 Dodge Caravan
    Steps for RVs are more or less a universal fit, it all depends on what kind of pace you have where you are wanting to install it. I have attached a picture showing the dimensions of the Flexco Manual Pull-Out Step for RVs # SMFP-1100 that you can use as a reference to determine if it will work for your application or not. A review video has also been linked for you to check out.
    view full answer...
    Image 1 for
  • Dimension of Flexco Manual Step # SMFP-1100 When Folded In
    The Flexco Manual Pull-Out Step for RVs - Single - 7-1/2" Drop/Rise - 24" Wide - 350 lbs # SMFP-1100
    view full answer...
    Image 1 for Image 2 for
  • Recommended Single Manual Entry Step for a 2018 Forest River Forester 2291S Motorhome
    We do have some bolt-on manual steps that you can install on your 2018 Forest River Forester Motorhome to make it a little easier entering and exiting your motorhome. Out of the linked selection I recommend going with the Flexco Manual Pull-Out Step # SMFP-1220 which has a drop/rise of 3" and measures 21" wide x 8" deep. This is proudly made in the USA, comes with a 1-year warranty, and can be bolted or welded on depending on your preference. Attached is a review video for you to check...
    view full answer...
  • Can Flexco Manual Pull-Out Steps SMFP-1100 Replace Single Flexco Pull Out Step
    Sounds like you currently have the part # SMFP-1100 which has the dimensions you mentioned. The double steps like the # SMFP-2100 have these dimensions: Step dimensions: 24" wide x 9" deep Mounting base dimensions: 26-1/8" wide x 8" deep Bolt hole pattern: 24-1/2" wide x 7" deep Drop/rise: 4-11/16" From top of mounting bracket to top of first step platform 7-7/8" from the top of the first step to stop of second step platform Threshold: 13-5/8" from the top of the mounting bracket to the...
    view full answer...
  • Can Single Manual Step # SMFP-1100 Install on Promaster with Universal Brackets
    Stromberg has a set of universal install brackets with the part # LC301704 that you can use with the Steps part # SMFP-1100 which you can use to mount them basically anywhere you'd like on your Promaster.
    view full answer...
  • 2014 Coachman Clipper 17BH Double Step Recommendation
    I looked up a couple pictures of your 2014 Coachman Clipper 17BH and it appears to have the Manual Pull Out Step which is a pretty standard step like # SMFP-1100. Like most single steps this has a narrower mounting bracket width than double or triple steps. Yours in particular has a 26 inch width. The good news is we have a double step # LC432682 that will fit well and require minimal spacers.
    view full answer...
    Image 1 for
  • Replacement Pull Out Step for 2001 Winnebago Minnie Winnie 22R
    I looked up pictures of your 2001 Winnebago Minnie Winnie 22R and it has a cut out for a single step below the door. The Flexco Manual Pull Out step part # SMFP-1100 was designed to fit RV setups just like yours but you'd want to measure first to know for sure. Worst case scenario you'd have to move the mounting brackets or use outriggers like part # LC301704. The width of the mounting brackets of this are 25 inches though. Another option would be to weld these in place to your frame.
    view full answer...
  • Could Flexco Manual Single Pull Out Step part # SMFP-1100 Replace Electric Step
    Yes, the Flexco Manual Pull-Out Step for RVs # SMFP-1100 that you referenced can replace an electric setup on your RV. The mounting brackets of this are 25 inches wide which is a very common size but worst case scenario you'd have to move the mounting brackets or use outriggers like part # LC301704. Another option is that you could weld these to your RV frame too.
    view full answer...
  • Mounting Flexco Manual Pull-Out Step for RVs to a 2019 Ford Transit T250
    The Flexco Manual Pull-Out Step for RVs, # SMFP-1100 is designed to support RV's, but I don't see a reason it can not be adapted to mount on a 2019 Ford Transit T250. While we cannot confirm the fitment to your van as we have not attempted this type of mount, I can point out that the Lippert Outriggers for RV Steps, # LC301704 are available if needed. As for the steps, yes they are solid enough to perform well on your van providing you make a proper mount to the frame. These can be either...
    view full answer...
  • Recommended RV Steps For A Travel Trailer With A 25" Mounting Bracket Width
    For a mounting bracket width of 25" we only have a one-step RV Step # SMFP-1100. What you can do instead is install an a fold-down step like the MORryde StepAbove RV Steps - 2 Steps Item # MR26RR. It fits a doorway width of 23-3/4" - 26-1/4" and an entry height (ground to bottom of door threshold) of 25" - 29". These sturdy RV steps adjust to rough terrain, eliminating the springboard effect and providing a wobble-free step into your camper. These steps are detachable so you won't get locked...
    view full answer...
  • Recommended Single Step Without Motor for Toy Hauler
    The Lippert Components Kwikee Step Frame 28 SERIES SINGLE STEP (908028000) # LC3747457 won't be able to store properly without the motorized components. To add this, you would also need the Lippert Components Kwikee Step Motor Conversion/Upgrade Kit # LC379145. If you want a manual step, I recommend the Flexco Manual Pull-Out Step for RVs - Single - 7-1/2" Drop/Rise - 24" Wide - 300 lbs # SMFP-1100. The step dimensions are 24 inches wide and 9 inches deep. The bolt pattern is 23-1/4...
    view full answer...
  • Recommended 3rd Step for Shast RV
    The Flexco Manual Pull-Out Step for RVs - Single - 7-1/2" Drop/Rise - 24" Wide - 350 lbs # SMFP-1100 cannot be added to an existing 2 step system. You would need to replace the 2 step system with a 3 step to gain that additional step. You may consider the Flexco Manual Pull-Out Steps for RVs - Triple - 8" Drop/Rise - 24" Wide - 350 lbs # SMFP-3100 for that application. If you want to keep the 2 step and just add another portable step when needed, then I recommend the Safety Step Adjustable...
    view full answer...
  • Folding RV Step for Ford Transit T150 Van
    I suggest the Flexco Manual Pull-Out Step for RVs, # SMFP-1100. While we cannot confirm the fitment to your van as we have not attempted this type of mount, I can point out that the Lippert Outriggers for RV Steps, # LC301704 are available if needed. These can be either bolted or welded to the van.
    view full answer...
  • Single Step Recommendation for Outside of Class C Motorhome
    We have single step platform steps like the part # PA-100 for something that you'd set on the ground in front of the motorhome door. Or if you were looking for something that attaches to the motorhome we have the Flexco manual pull out step part # SMFP-1100.
    view full answer...

Do you have a question about this RV and Camper Step?

  • Why

    At we guarantee:
  • Highest quality rv and camper steps for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv and camper step information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Updated by:
Kathleen M
Employee Shelly K
Updated by:
Shelly K
Employee Halie H
Updated by:
Halie H
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee Cole B
Installed by:
Cole B
Employee Samantha S
Written by:
Samantha S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.