Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
Item # C13704
Retail:$642.95
Our Price: $422.28
You Save: $220.67
Confirmed to Fit
2018 Thor Hurricane Motorhome
27B
29M
31S
31Z
34J
34P
34R
35M
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (59)
- Q & A (0)
- Photos
2018 Thor Hurricane Motorhome - Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- Frame Mount Hitch
- 22 - 66 Inch Wide Frame
- Bolt-On
- 2 Inch Hitch
- CURT
Adjustable trailer receiver hitch designed for use on RVs that can be bolted to the Thor Hurricane Motorhome frame. Powder coated steel is sturdy and corrosion resistant.
Features:
- Universal hitch designed for use on RVs and motorhomes
- Heavy-duty side brackets allow for maximum adjustability
- Slide along hitch body to match the width of your vehicle frame
- Work on box frame, C-channel frame, or I-beam frame
- Let you position tube mounts toward the front or rear, putting the hitch body in the best location for clearance
- Hardware included
- High-gloss black powder coat finish resists rust, corrosion, and is resistant to scratches and UV damage
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Not for use with a weight distribution system
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum tongue weight: 500 lbs
- Fits RV frame width:
- Minimum: 22"
- Maximum: 66"
- Overall width of hitch: 68-1/2"
- Overall length of receiver tube including crossbar: 11"
- Distance from front of crossbar to front of receiver tube: 8-3/16"
- Limited lifetime warranty
Notes: The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
13704 Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
Installation Details
Tech Tip
Drilling required for installation
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide - C13704
Average Customer Rating: 4.7 out of 5 stars (59 Customer Reviews)
Adjustable trailer receiver hitch designed for use on RVs that can be bolted to the vehicle frame. Powder coated steel is sturdy and corrosion resistant.by: Dave03/21/2023
When I received the trailer hitch I had ordered the carton had large hole in it. On inspection of the content I found that the hardware was missing. This was a UPS delivery. I took pictures of the package and called etrailer customer service. They immediately took action and sent a replacement package to me. They offered any assistance I might need for the installation of the hitch.
The installation went well and I now have a good quality hitch on my RV.
by: Marc M09/11/2020
Very well constructed, heavy duty hitch. I installed this on the back of my Arctic Fox 29-5T 5th wheel, in order to haul my generator on it. I had to add some 2" square steel stock as spacers to lower it enough to clear hard parts on the trailer. Only negative is the requirement for some odd sized, large drill bits.
Marc M.
9/12/2021
High quality product that performs its task without any issues.
by: William07/15/2023
The site says this does not fit but it works perfect for my application it mounted to the main frame rail towards the front and the other part of the fame to the back. my goal is for my bike rack and not to pull anything else.
by: Pat11/08/2022
This was great for what I needed, which was to pull my kayak trailer behind my 5th Wheel. It was a simple install. I installed it by myself, but it would have been easier with two people. I have made two cross country trips with no issues. With a small trailer and a 35' 5th Wheel, I cannot see the trailer at all, except for the shadow if the sun is right.
Pat
11/9/2023
I have changed from a light kayak trailer to a slightly heavier 12X6 enclosed trailer. It pulls great, but I do feel a little movement when I get passed by larger vehicles, similar to what if feels like with towing a bumper pull RV. It is not bad, but it is noticeable. I still highly recommend the hitch, it seems to be working without any issues.
Mike L.
11/16/2023
@Pat We're glad its working well for you!
by: Jeff 04/13/2024
Installation was super easy and has performed perfectly for pulling my 18' boat. Definitely a cost effective alternative to having a hitch welded into place.
by: Bryan11/02/2021
1976 Ford Ranchero
The high quality, flexibility of a universal part, adaptability and ease of fabrication as well as installation made this product very user friendly. Also, a BIG thank you to Danielle in customer service (ext. 79394) who researched and looked until she found just what I was looking for from the shelf. Nice work ! As you look below at Warhawk, take note that this is the Hot Rod the hitch will be attached to...for the long haul.
by: Richard 04/27/2024
Worked great! Fit on our 1972 Airstream.
by: Frederick05/19/2021
Curt's adjustable trailer hitch receiver worked as planned. I was looking for a hitch receiver that would be able to carry the 75 lb. weight of our double recumbent trike carrier. The camper bumper has a low weight rating and I wouldn't trust it to hold the carrier weight over the long term. I mounted the hitch assembly by both bolting it through the bottom of the camper frame and also welding side plates between the hitch assembly and camper frame. I also welded a plate between the receiver tongue and rear camper frame to minimize receiver flex. These additional plates should allow us to safely carry our two recumbent etrikes on the carrier if needed in an emergency. Total weight including carrier would be 175 – 200 lbs. Currently we carry the etrikes inside the camper on a custom rack.
by: Judd R.10/28/2020
Installed the hitch in less than a day. I bolted it to the trailer frame. I have a rack on it for carrying a generator.
Judd R.
10/28/2021
The hitch is strong and durable. It does not loosen when traveling and easily holds a generator.
by: Javari04/21/2022
Great Experience! I needed to find a hitch that could carry a bike rack on the back of a travel trailer. E-trailer very informative about finding the correct hitch. It arrived very quickly & the staff are great about following up on the progress of the order. The installation instructions were very clear to follow.
by: David04/11/2022
I ordered a 66” adjustable hitch for the back of my Keystone fifth wheel. With fuel prices high, I want to pull another trailer for my side by side. It arrived in just two days. I had to weld it to my frame because of the way the back stabilizer jacks were but I think it will work great.
by: John06/04/2020
Excellent proactive customer service. I wish all my online purchase experiences were with etrailer.com as they have superior merchandise at reasonable prices and they follow that up with outstanding customer service. I'm elated how my hitch mounted on my camper.
by: Paul05/10/2023
The box arrived with only minor damage to the cardboard. The frame was able to move around alot which caused some damage to the cardboard. The bag of fasteners was intact but not secured. The installation of the hitch receiver was relatively straight forward. Drilling upward to attach the brackets was very challenging. Not much room to push a drill bit into the metal channels.
I feel more is needed to secure the 60 pound hitch frame to the box.
by: Chris03/31/2023
Install hardware not packaged appropriately. All of the nuts, bolts and washers were not in a sealed package inside the shipping box. Some of the install hardware fell out of the box through small holes in the box. When notified of the missing hardware, I was sent the wrong replacement hardware. When notified of the incorrect replacement hardware, I was told to find replacement hardware at a local hardware store, which I had already done, but nobody carries that big of size of grade 8 washers. Still waiting for a resolution. In the meantime, I've had to cancel a trip to Moab this weekend because we can't pull our side by side without this hitch installed and we've lost out nonrefundable deposit on our RV pad. This whole ordeal has cost us in excess of $1500. Do yourselves a favor and just take your rig to a professional installer and pay their fees. Nothing is worth the cost of the headache I've gone through trying to save a dime through eTrailer!
by: James 03/17/2023
Chevrolet Volt
Like so many other people, we have recently acquired E bikes. Our RV isn’t very large. It is an R-Pod RP202.. I debated, trying to find a way to store the ebikes inside the RV, but realized we would be tripping over themconstantly, I bought a great bike rack for our car that is rated for RV use. It is the Hyperax 2023 VOLT RV and it works great on our Audi Q8 tow vehicle. So that got me thinking of trying to install a hitch on our our pod. After carefully considering various universal, RV hitches, I decided to go with the Curt model 13704 which is rated 5000/500lbs capacity. I had to drill four 1/2”holes in the I-beam frame and four 9/16”holes in the hitch cross beam. The hitch was the perfect with four of the R -Pod RP202 and should have no problem carrying the weight of our two 60 pound e-bikes. E-trailer provided excellent support both before and after I ordered the hitch from them. I alsoneeded to remove the rear stabilizer jacks and relocate them to just forward of the hitch brackets.
by: Joseph02/27/2020
Just received this for my 18' Travel Trailer and the build on this item is really strong and heavy. I have not installed it yet but it is straight forward and looks quite simple.
I would definitely recommend this to my friends.
Also shipping was extremely fast and i have been using etrailer for better than 10 years now as they never let me down.
All heavy duty hardware is included which is not in the picture
by: Douglas02/21/2023
Ford Transit Connect
Buyer be aware! Obviously, this product is heavy, thus etrailer should have that in mind when packing the product. The first hitch they sent out - the "packer" threw all the pieces in a box and shipped it. While in transit the bag of parts, I assume, went flying out of the box because I received 12/27 pieces of the parts. The two smaller parts were left unsecured to anything and scratched and dented the main hitch.
Called the company to try to rectify the situation. They offered to send a new hitch and have UPS pick up the old one. Fast forward to the new hitch being delivered. This time they did secure the loose pieces to the main hitch, however, did not make any attempt to limit metal on metal rubbing. The second hitch has powder coat missing and one large dent in the main hitch.
Called customer service to try to rectify this issue, again. Their solution was to credit me $20 so I could go buy paint to coat over the issues or wait around until they send another hitch out. I do not have time to wait around for them to send another hitch - much less think they would actually care enough to package something like to so no damage would occur. Beyond disappointing that this is how etrailer choose to handle the situation - not to mention reading through some of the other comments they have had the same problem previously - again it seems etrailer does not care enough about their customers and the products they purchase especially ones that cost this much.
by: Dean 05/11/2023
The hitch got here very fast, which was greatly appreciated. Very helpful customer service. I talked to customer service numerous times and every time they were able to answer. Every question I had I would Highly recommend E trailer for anybody looking to buy a hitch
by: Gregory09/22/2022
First off you need to rethink your packaging!!
All the hardware blew out of its bag therefore made its way out of the corner of the box by way of a hole made by one of the 2 nuts, 2 bolts and 3 large washers that were missing! The brass staples didnt hold the box together at the end where the holes were!! So they were forgotten or lost in shipping!
Brooke M.
10/6/2022
Thank you for letting us know about this - we definitely want you to have all the parts that should have come with the order. I have already sent your information to our customer service team and they will be in touch with you soon.
by: Joel 02/04/2023
0 0
The first time I ordered the box was empty from UPS. E trailer said no problem and resent a new order right away. Great service!
by: Joey H04/15/2020
2019 Honda Passport
Installed this on my 2019 Keystone Passport 2670BH for pulling a second trailer and it works perfectly. I did have to purchase a drawbar with a longer receiver so the trailer would clear the stock bumper on the camper. My campers bumper mounts wouldn't let me move the hitch further back and I didn't want to remove the stock bumper. Works great though. Very strong.
by: Lora04/29/2023
Just what we needed. Got here fast too! Thank you etrailer
by: Raymond10/29/2018
As is typical of Curt products, this is extremely well built. Very clean painted finish. It might be a little challenging to drill the 5/8 holes for the mounting brackets as the the tubing is quite thick. I did it on a milling machine- a good drill press will work also. Otherwise, take your time and use a series of small drills to step up to the 5/8" I actually used a 21/32 as that is what it appears Curt puts in the mating part. This was overkill for my application. I put it on a Keystone Fuzion 371 Toy hauler. I have a pit bike and two beach cruisers. The mounting plate on the hauler is not designed for the full load of this hitch, but my intent is just for the bike rack.
by: Thomas08/11/2022
2013 Subaru Forester
I'm sure UPS didn't mean to run over the box with their truck! Despite the damage to the shipping package, the hitch arrived in perfect condition. Shows how tough it is - just as we had wanted. :-)
by: James06/16/2020
this hitch fit perfect on the rear of my fifth wheel trailer and has pulled my swivel wheel trailer down the road with no problems.
25
59
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Hitch Solution for RV with Sealed Lower Panel Covering Rear FrameSince your trailer's frame is not easily accessible due to paneling on the bottom of the RV you'd want to go with a bumper hitch like the part # E-100 and move the spare wheel off-center on the bumper so the hitch hitch fit. A friction sway control unit like part # 83660 would be a great option to reduce sway as well.
view full answer...
- Mallard Camp Trailer Hitch Receiver Recommendation for 300 lb Tongue WeightThe RV Bumper 2" Trailer Hitch Receiver # S64025 is what we have to fit your 4-1/4" x 4-1/4" bumper. The only problem is this is limited to a 200 lb tongue weight rating. If you want something with a higher tongue weight rating we need to go a different route like with a frame mount hitch receiver. A popular option is the Curt Adjustable Width Hitch Receiver # C13704. This is a bolt-on application and fits trailers that have a 22" - 66" wide frame. This has a higher tongue weight rating...
view full answer... - Recommended Hitch for a 2023 Fleetwood Fortis on a F53 Chassis Yes, it will! The Adjustable Width Trailer Hitch Receiver item # C13704 has been confirmed to fit all models of the 2023 Fleetwood Fortis that was built on a F53 chassis. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight.
view full answer... - 2 Hitch Reciever for 2019 Grand Design Imagine 2600RB Trailer to hold 300 Pound ScooterThe Curt # C13702 RV & Camper Hitch is suitable for camper frames measuring from 18" to 51" in width and can be bolted on or welded on. It features heavy duty adjustalbe side brackets anda black powder coat finish that will resist rust. If you need something that will adjust wider then the Curt # C13704 hitch that adjusts from 22" to 66" is the way to go. I have attached links to each of these products and a review video. For a motorcycle carrier you could use the etrailer # E98873 Carrier....
view full answer... - Recommended Trailer Hitch Receiver for 2017 Forest River 2380 FTD to Flat Tow Chevy SparkFor a motorhome, you won't use a custom fit hitch receiver. Instead you will use an RV hitch receiver. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. This hitch is rated to pull the Chevy Spark without any issue and no extension is necessary.
view full answer... - Bike Rack Recommendation for Carrying 60 lb Bike at Rear of Travel TrailerI do have a bike rack solution that will work well for your, but not every bike rack is designed for the rouger ride quality at the rear of a camper. I wish I could recommend the Thule EasyFold XT part # TH903202 for you as it is a great rack, but it shouldn't be used at the back of a travel trailer. The most similar option is the Kuate Transfer V2 part # KU84FR which has a 60 lb per bike capacity and can be used at the rear of a camper so it would work well for you. This would work great...
view full answer... - Recommended Trailer Hitch Receiver For A 2020 Forest River Salem FSX 280RT Toy HaulerFirst you'll need to measure the frame width of your 2020 Forest River Salem FSX 280RT toy hauler. Once you know that you can choose the correct size receiver hitch. The Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704 is compatible with frame widths of 22" to 66" and has a GTW of 5000lbs and TW of 500lbs. if you have a frame width larger than 66" you can use the Curt Adjustable Width Trailer Hitch Receiver for RVs # 13703 which is compatible with frame widths of 22" to 72"...
view full answer... - Recommended Hitch and Bike Rack for a 5th Wheel CamperThe best option to mount a bike rack with your 5th wheel attached is to add a hitch to the 5th wheel and use a hitch-mounted bike rack. For the hitch, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, part # C13704. This fits box frames, C-channel frames, or I-beam frames between 22" and 66" long and gives a 2" receiver. It can be either bolted on or welded on and features a maximum tongue weight capacity of 500 pounds and a gross towing weight capacity of 5000 pounds....
view full answer... - Recommended Electric Bike Carrier For A Gulf Stream Travel TrailerWhen it comes to carrying electric bikes on your Gulf Stream travel trailer using The Malone 2 inch Dual Purpose Hitch Receiver # MPG544 will reduce the tongue weight capacity of your hitch by 50 percent. Since your 2011 Mitsubishi Outlander has a tongue weight of 350 pounds it will drop down to 175 pounds. I recommend putting The Adjustable Width Trailer Hitch Receiver for RVs, 22 inch to 66 inch Wide # C13704 on the back of your travel trailer. It is a bolt on style hitch that will...
view full answer... - Heavy Duty Adjustable Receiver Hitch for my 2020 Vanleigh Vilano CamperWe have exactly what you need! The Adjustable Width Trailer Hitch Receiver for RVs part # C13704 gives you the 500 lb. weight rating you are looking for and gives you an adjustable range of 22" to 66" Wide RV Frame widths. This will include all of the hardware you will need to do the installation. Check out the link and video on it below. Happy Camping!
view full answer... - How to Determine if Trailer Hitch Can be Installed on 5th Wheel TrailerThere are only universal fits for trailer hitches that fit on trailers like the Crossroads Cruiser 5th wheel trailer you referenced, as they are custom fits, but I can tell you how to determine if one will fit. What you need to know is if you will be using a frame-mount or, if that's not accessible, a bumper mount, and I'll give you a couple of examples. The bumper-mounted hitches are the easiest to determine as you just need to know the size of your bumper. The Curt RV Bumper 2" Trailer...
view full answer... - 5k Rated Trailer Hitch that Fits 2006 Itasca Spirit Class CFor a 5,000 lb trailer hitch that might fit your 2006 Itasca Spirit Class C you'd want the Curt # C13704 which will basically fit all RV frame styles that are between 22 and 66 inches.
view full answer... - Adjustable Width Trailer Hitch for RV's with the Highest Tow CapacityThe 5,000 lb. maximum gross trailer weight on the Adjustable Width Trailer Hitch Receiver for RVs # C13704 is the highest that we have available. We do not have any that reach the 7,000 lb. capacity you are looking for.
view full answer... - Recommended Hitch for Rear of KZ Sportsmen Classic 130RBThe hitch you'd use will depend on the outside to outside distance apart your frame members are. If this distance is between 18-51 inches, use # C13701. For a span between 22-66 inches, use # C13704. Both hitches have a tongue weight capacity of 500 lbs. For a span of 22-72 inches, use # 13703 which has a 350 lb tongue weight capacity. The hitches can be bolted or welded into place. You'll want to be aware that even though the hitches mentioned above have a given tongue weight capacity...
view full answer... - Bike Rack For e-bike With Fenders, 2" Receiver HitchWe have a great option for but it is not a single bike, bike rack as we do not have one that meets your needs of a bike with fenders. For your step-thru eBike with fenders, I recommend the Yakima OnRamp Bike Rack for 2 Electric Bikes, # Y36FR. This has a weight capacity of 66 lbs. per bike with adjustable frame clamps and bike trays that fit a variety of bike frame styles. The padded clamps with ratcheting straps hold bikes securely by the frame or seat post and the cradles slide up and...
view full answer... - Recommended Trailer Hitch Receiver and 4 Bike Rack For Dutchman Aspen Trail 1700BH TrailerAs long as the frame on your Dutchman Aspen Trail 1700BH is between 22" - 66" wide I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 which works with box, I beam, and C channel frames. The # C13704 has a tongue weight rating of 500lbs, and a trailer weight rating of 5000lbs and would be perfect for carrying a bike rack. If your frame is wider than 66" you will need the # 13703 instead that fits frames up to 72" wide, but has lower capacities...
view full answer... - Dimensions Of The Stromberg Carlson Adjustable RV Trailer Hitch The receiver tube of the Stromberg Carlson Adjustable Accessory Hitch Receiver # SC45MR is going to stick out 4-11/16" past the crossmember and since both tubes are 2" x 2" the height from the bottom of the receiver tube to the top of the crossmember would be 4". The flat brackets on the end of the adjustable crossmember tubes are 7-1/4" x 3" while the angled brackets are 7-1/4" x 2". Because this hitch essentially needs to be welded in order to bear a decent amount of weight it's not...
view full answer... - Recommended 2 Inch Trailer Hitch for 5th Wheel Trailer To Use With Bike Rack The trailer hitch that I recommend for a fifth wheel trailer is the Adjustable Width Trailer Hitch Receiver for RVs part # C13704 which is hands down one of the most popular options for trailers due to its extremely universal design. The Adjustable Width Trailer Hitch Receiver has a 500 lb tongue weight capacity which should be enough for your bike rack and six bikes. The Adjustable Width Trailer Hitch Receiver for RVs bolts to the bottom of the trailer frame or possibly the bottom of the...
view full answer... - Does Lippert Jack It Bike Rack Have to Use Angled PieceI see what you are saying and yes, the Jack-It 2 Bike Rack # LC429756 does need to use the angled portion because the top portion does not have a bolt hole in the right spot to be able to not use that piece (see accompanying photo). The best option for you to carry a couple bikes with your trailer is with the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663. If you have a 4" or 4-1/2" square bumper this will fit right to that, or you will need this rack plus the...
view full answer...
- Recommended Trailer Hitch and Bike Rack for a 2018 Lance Travel TrailerYour best bet for your 2018 Lance TT is to use a universal hitch. These hitches are going to be adjustable to fit a variety of frame widths and will work great with hitch mounted accessories like the bikes you plan to carry. We do have a few size ranges for you to check out; for a 22" to 66" wide frame you'll want # C13704, for a 22" to 72" wide frame you'll want # 13703, and for a 18" to 51" wide frame you'll want # C13702. As far as bike racks go we also have plenty to choose from,...
view full answer... - Recommended Trailer Hitch for a 2020 NuCamp TaG Travel TrailerYour best bet for your 2018 Lance TT is to use a universal hitch. These hitches are going to be adjustable to fit a variety of frame widths and will work great with hitch mounted accessories like the bikes you plan to carry. We do have a few size ranges for you to check out; for a 22" to 66" wide frame you'll want # C13704, for a 22" to 72" wide frame you'll want # 13703, and for a 18" to 51" wide frame you'll want # C13702.
view full answer... - Suggestion On How To Carry Two E-Bikes And Two Kayaks With A 2010 Toyota Tundra And A Pop-Up TrailerFor your 2010 Toyota Tundra with your 2008 Coleman Niagra Pop-Up Camper, I recommend using a roof mounted kayak rack on your Toyota Tundra to haul your 2 12' Hobie Passport Kayaks, and transport your two e-bikes at the rear of your trailer. For a roof mounted kayak rack, I recommend the Thule Stacker # TH830, which can accommodate up to 4 kayaks, and a total capacity of 75-lbs. For a trailer hitch for your 2008 Coleman Niagra, I recommend the Curt Adjustable Trailer Hitch Receiver #...
view full answer... - What Trailer Hitch Is Needed For A 5th Wheel Triple Towing A Flatbed TrailerThe hitch you need will depend entirely on your trailer's maximum towing capacity. You are going to need to consult your owner's manual or contract your trailer's manufacturer to find these figures. From here you're going to need to find a hitch that can handle your trailer and fit your trailer's frame. You are also going to need to ensure that your tow vehicle has the adequate capacity to handle all the weight of the 5th wheel and flat bed, as well as a hitch that can also support the...
view full answer... - Recommended Hitch And Bike Rack For Hauling EBikes On A 2017 Grand Design Solitude 5th Wheel TrailerTypically the bumper on an RV is not strong enough to support the weight of a bike rack, especially a bike rack with ebikes. You would need to verify with the manufacturer what the weight capacity of the bumper actually is before mounting anything to it. Typically I recommend installing an RV hitch like the # C13704, which has adjustable mounting brackets to fit the a multitude of trailers. To find the correct fit for your trailer you'll need to measure the distance of the inside of the...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jeff D
Video Edited:
Jonathan Y
Installed by:
Cole B
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Carrie F
Written by:
Kristina F
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dave
3/22/2024
Hitch works fine. I did add a U-bolt around the receiver tube and fastened it to the RV bumper to reduce some of the twisting force where the hitch bar connects to the RV frame. We use the hitch to hold a heavy duty bike rack for our E-bikes.