Curt RV Bumper 2" Trailer Hitch Receiver
Item # E-100
Retail:$169.95
Our Price: $102.64
You Save: $67.31
Confirmed to Fit
2018 Forest River Sandpiper Fifth Wheel
343RSOK
345RLOK
354RET
357RE
367DSOK
369SAQB
372LOK
373REBH
375BHOK
377FLIK
378FB
379FLOK
381RBOK
383RBLOK
389RD
38FKOK
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (723)
- Q & A (0)
- Photos
2018 Forest River Sandpiper Fifth Wheel - Curt RV Bumper 2" Trailer Hitch Receiver
- Bumper Mount Hitch
- 4 x 4 Inch Bumper
- Bolt-On
- 2 Inch Hitch
- CURT
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.
Features:
- Has 2" square receiver opening, ideal for hitch accessories such as bike racks and cargo carriers
- Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers
- Powder coat finish resists corrosion
- Includes mounting hardware
- Weight capacity: 3,500 lbs GTW / 350 lbs TW
Note: For use with RV-approved accessories only.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
19100 Curt RV Bumper 2" Trailer Hitch Receiver
Installation Details
Tech Tip
No drilling required for installation
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curt RV Bumper 2" Trailer Hitch Receiver - E-100
Average Customer Rating: 4.8 out of 5 stars (723 Customer Reviews)
Intended for use on 4" square channel bumpers on the rear of many RVs and towable campers, this 2" x 2" hitch receiver is ideal for RV-approved hitch accessories, such as bike racks and cargo carriers.by: Stephen 03/27/2023
I still need to install it but the quality looks perfect. I like that with this style you can mount it off-center if you have a spare tire as well on your back bumper I really appreciate the expedited shipping. I always shop from a trailer if I can.
by: Lynn01/24/2019
2017 Toyota Tundra
Just installed this unit on my travel trailer bumper and it appears to be fairly heavy duty and secure. Did have some trouble getting it on the bumper but used my truck tire jack for leverage & it popped right on (see photo). The receiver is just what I need for my bike rack & 2 bikes that I will be hauling to Florida next month. Safety first & this unit looks well made & will hold to the challenges of the road.
Lynn
1/25/2020
After a year & 2 trips to Florida is perfect! No need to tighten the bolts due to vibration & wear & tear from a 45 lb bike rack & 40 lbs of bikes. I am extremely pleased with this receiver!
by: Gary B.07/18/2017
The Curt trailer hitch is solid as can be and couldn't have been any easier to install. Product arrived ahead of schedule and George at the erailer is great with email communications . I will be purchasing future products from this company. Great job George at etrailer. happy camping
Gary B.
7/20/2018
Finally started using it this year it works great!!
by: Kevin04/25/2024
As advertised, fit perfect on the back of my camper, no issues. Always great service from etrailer
by: Lawrence02/10/2024
2016 Jayco Jay Flight SLX Travel Trailer
This receiver fit perfectly and was easy to install. We have our Stow a Way luggage carrier mounted on the back of our little RV trailer.
Tried to download a pic but unsuccessful.
by: Randall12/10/2019
Thank you etrailer, I’ve been looking for this bumper receiver for my 38’ Keystone toy hauler for a bike rack. Ordered and four days later it’s here. Installed in 10mins, fits perfectly. I used a flat washer and nylok nuts instead of nuts supplied. Well built and sturdy.
Randall
12/11/2020
Great product, we used it all summer on our travels without any problems.
by: Aaron11/24/2022
This thing is holding up great. I had a different stile before and it broke driving down the road. Causing my cargo rack to fall off carrying my generator and my bb-qer. But this mount has been amazing
by: Kyle12/09/2017
Awesome product. I did have one problem with it but it was on my end. The bumper on my Keystone Summerland Series Mini was a little to close to the body so I had to flip the mount over to make the bolts work. Shipping was fast!!!! 4 days including the day I ordered. Would have been 3 but something happened with UPS. I will definitely be buying more products from etrailer Corporation.
Kyle
12/9/2018
Still holding up great a year later. It easily allows me to carry my cargo receiver which has my generator and a couple five gallon gas cans on the back.
by: Matt 10/09/2023
Delivered quickly. Haven’t installed it yet and look forward to using this for my Thule Bike rack.
by: Bruce11/24/2023
Wow! Service was personal, quick & complete! Will definitely buy from the folks at etrailer again!
by: Mark06/04/2023
A previous trailer hitch receiver was not adequate for a bike rack with heavy mountain bikes. It developed cracks in the metal. There’s a fair amount of vibration for a bike rack at the back end of a camp trailer. I bought the Curt receiver to mount a 50# Kuat bike rack to carry two +50# e-bikes. So the load is +150# plus the torque of extending almost three feet from the receiver. Worked great. An observer noted the rack and bikes were quite stable.
by: DW07/24/2019
Torqued to spec. and works as expected. We hang a bike rack off of it on the back of a travel trailer. Solid design.
Reason not a 5: There was a slight alignment issue getting the bolts through both sides due to the stampings not being aligned when welded. Once I got the bolts through, no issue, but there was interference with the threads on the stamping; had to turn the bolts through as they would not slip through.
Still would recommend.
by: Bill T.10/30/2019
I have a 21.5' Trail-Lite RV that had a plastic bumper. I wanted to put a Bike Rack on the back of the RV, so I bought some 3/16" 4" x 4" square stock and had a welder weld it on the back of the RV. This is a lot heaver duty than a stock bumper. Once the bumper was installed, I bought this Curt bumper hitch, part E-100, from etrailer.com. Installation was a breeze, and only took a few minutes. I used some grease and a small hydraulic jack to encourage the hitch to slide on. You DO NOT need to drill out the holes as some have reported. A 4 pound sledge will encourage the back hitch hole to pop above the 4" bumper. Use some never seize on the threads so it will come apart some day. Here is the finished product, with my e-bike installed. Shipping was quick and FREE! (I ordered over $100 of stuff)
by: Nate 08/30/2023
Easy to install and has worked great for a bike rack on the back of our travel trailer.
by: Eric09/24/2019
Thanks to etrailer and Michelle for helping me select the Curt E-100 4" bumper mount cargo reciever hitch. The quick delivery helped us get on our fall trip accordingly. Definatly the right product for this application.
by: Matthew06/22/2020
Hitch mount was as info described. Needed to mount a heavy 4 bike rack on my RV. Arrived on time and fit perfectly. etrailer videos were very helpful in selecting the right hitch for my weight requirements. You took the time to make them to support the products, you earned my business because of it.
by: Gregory 05/04/2024
2022 Grand Design Imagine Travel Trailer
Very prompt shipping thank you! Easy to order
by: Bill06/17/2020
Great product, solid and easy to install on our Flagstaff Camper. E-Trailer kept a timely Email contact informing me of the tracking progress on delivery. Thanks for the great product and professional service.
by: RAY K04/13/2012
HELLO
I LOOKED AT A LOT OF TRAILER HITCH RECEIVERS.
AND THEY WERE ALL JUNK.
ON TELL I FOUND CURT RV TRAILER RECEIVER
I NEED IT FOR MY BIKE RACK
I LIKE THE WAY IT IS MADE
IT LOOKS GOOD ON MY NEW RV
THANK YOU ETRAILER YOUR RATING IS EXCELLENT
I SENT YOU THE MONEY IT WAS ON MY PORCH IN 3 DAYS
by: Jody06/13/2020
I am using the Curt bumper hitch for my travel trailer . I mounted it to the 4x4 bumper . It fit well and will be perfect for holding my kayaks . Would recommend to anyone , great product !!
by: Johnny07/14/2023
This one missed the quality control step. Tolerances were too close and missed the mark. Had to remove just a small bit of weld with a to clear the bolt mounting holes.
sorry didn't think about documenting it with a picture.
by: Philip11/20/2018
0 0
just received today, mounted it on the bumper vertically so as to make a mount for my waste travel tote for my travel trailer, or i can mount horizontally to use my luggage rack.
Shipping was quick.
So far so good.
by: Daniel 02/14/2024
Great customer service
by: Dave09/10/2022
Works wonderfully! Took 10 minutes to install on the back of my 44' Vilano and the rear basement door still clears with it mounted.
by: Randy05/29/2020
Great product. Easy 10 minute install. Adds good utility and cargo capacity to my travel trailer.
25
723
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Trailer Hitch Receiver Options For A Box Trailer Frame I do have an RV trailer hitch receiver that may work for you in the Adjustable Width Trailer Hitch Receiver part # 13703. The hitch receiver will fit trailers with frame rails from 22" to 72" apart. The frame brackets sit about 3" down from the crossbar therefore, may work with frame rails that run parallel to the rear bumper. I have attached a photo that will give you the dimension of the brackets included with this kit for further detail. When using this trailer hitch for non-towing application,...
view full answer...
- Recommended Bumper Mounted Bike Rack Rated for RV Use on 2018 Lance 2375 Travel TrailerFor your travel trailer, I recommend the Swagman Platform-Style 2 Bike Rack for 2" Hitches or RV Bumpers # S64663. This bike rack will allow you the bumper mount option by utilizing a compatible 2-inch receiver adapter. This is not confirmed to work with other bike racks but is designed for use on this hitch. I recommend using the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 2" Shanks # S64030 for security. If you want a nicer option, I recommend you use the Curt RV Bumper...
view full answer... - Recommended Trailer Hitch Receiver For 2008 Jayco Eagle 320RLDS With Brackets On Inside Of FrameSince there are supports on the inside of the frame that block where the brackets of the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 need to attach, the best option would be to use the Curt RV Bumper 2" Trailer Hitch Receiver # E-100 which will mount to the 4" bumper your 2008 Jayco Eagle 320RLDS has. I do not recommend cutting off any factory supports to allow clearance for the hitch to fit. I included videos for each of the products mentioned for you to...
view full answer... - Recommended Hitch for a 2019 Starcraft Mossy Oak Travel TrailerThe easiest way to add a hitch to your 2019 StarCraft Mossy Oak 21FB travel trailer is to use the Curt RV Bumper 2" Trailer Hitch item # E-100. This hitch simply attaches to your 4" square channel bumper. It has a 350 lbs maximum tongue weight so plenty of capacity for e-bikes and a bike rack. This set up would work great with a bike rack like the Swagman E-Spec item # S94FR which has a 70 lbs capacity per bike and is rated to be used behind a travel trailer. However, lots of the E-bike...
view full answer... - Does Curt Bumper Hitch # E-100 Have Capacity for E-Bike RackThe Curt RV Bumper Bike Rack part # E-100 has a tongue weight capacity of 350 lbs so it would easily handle the weight of your bike rack assuming the bumper is also rated for it. The best option for carrying E-Bikes on a a trailer trailer is the Swagman E-Spec Electric Bike Rack # S94FR. The E-Spec holds your bike down with hooks that touch the frame and it can hold up to 70 lb E-bikes and it will do well to carry your two e-bikes on the back of your travel. I have linked a review video...
view full answer... - Will Curt Adjustable Width Trailer Hitch Fit 2020 Lance 2285 Travel TrailerThe Curt # 13703 fits 22" - 72" frame widths and works on box, C-channel, and I-beam frames. As long as this is what you have on your travel trailer it will fit. There is no specific information on the frame of your 2020 Lance 2285 so this is something you will have to measure and confirm yourself. You may also want to check out the Curt RV Bumper 2" Trailer Hitch Receiver # E-100. This bolts onto 4" square channel bumpers found on many travel trailers. Before using this to tow or carry...
view full answer... - Front Mounted Trailer Hitch Receiver for 1985 Dodge VanThere aren't any front-mounted trailer hitch receivers that are custom designed to fit for a 1985 Dodge B350 and your bumper is not structurally strong enough to work with the Curt RV Bumper 2" Trailer Hitch Receiver # E-100. What that means is the only option that might work is a universal, adjustable-fit hitch such as the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" wide # 13703 or the Multi-Fit Motorhome Trailer Hitch, 24" - 46" wide # 5350 or 47" - 71" wide # 82201. These...
view full answer...
- Trailer Hitch Option for 2022 Coleman 202RD Travel Trailer w/ Stabilizer Jacks Interfering w/ HitchIf your 2022 Coleman 202RD travel trailer has stabilizer jacks interfering with where a hitch like the Adjustable Width Trailer Hitch Receiver for RVs # 13703 would install, we do have an alternate style like the Curt RV Bumper 2" Trailer Hitch Receiver # E-100. The Curt RV Bumper 2" Trailer Hitch Receiver # E-100 fits 4" square channel bumpers on the rear of many RVs and towable campers.
view full answer... - Recommended Trailer Hitch for a Forest River Cherokee 284DBHThe Curt RV Bumper 2" Trailer Hitch Receiver, # E-100 is designed to fit standard 4" x 4" rear bumpers providing ability to tow a trailer up to 3,500 lbs. However, just because this component is rated for that does not mean the bumper on your RV is; you will need to confirm with manufacturer for spec on your Forest River Cherokee 284DBH. In addition, you will need to check legality of towing a bumper pull trailer behind a bumper pull trailer. Pulling a trailer behind a 5th wheel is frequently...
view full answer... - Recommendation for a Trailer Hitch that Mounts to a Bumper Pull HitchIt sounds like you are describing a bumper hitch with a ball. What you can do is remove the ball and install Curt Bumper Hitch, # E-3S. This will provide a 2 inch trailer hitch receiver that you can use with a hitch mounted bike rack. I have included a link to the installation details for the hitch. If you have an RV or trailer that has a 4 inch square channel bumper, you could use RV Bumper Trailer Hitch Receiver, # E-100. Or, if it is a 4 inch square continuous welded steel bumper, you...
view full answer... - Scooter Carrier and Hitch Recommendation for RV with 4 inch Square BumperIf you would like a motorcycle carrier that will work on a motorhome, I recommend looking at the Ultra-Fab Motorcycle Carrier, # UF48-979033. We were informed by Ultra-Fab that it is okay to use this carrier on a motorhome or trailer. For a hitch to mount to your 4 inch bumper (assuming it is rated for the weight of your scooter and carrier), you would want the part # E-100. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported...
view full answer... - Will Curt RV Bumper 2 Trailer Hitch Receiver Fit a Slightly Larger than 4 Inch BumperCurt RV Bumper 2" Trailer Hitch Receiver # E-100 is designed for 4 inch square, steel bumpers so to use it you would likely have to remove an area of that aluminum. The hitch needs to be right up against the steel bumper anyway; any of the similar hitches would be the same way.
view full answer... - Pop Up Camper Frame Mounted Hitch RecommendationFor your camper a better solution for a hitch would be a multi-fit frame mounted hitch like the part # 13703 as the dimensions of your bumper are not compatible with any of the bumper mounts we carry. The # 13703 will fit frame widths that are from 22 to 72 inches in width.
view full answer... - What is Purpose of Rear Hitch Installed on 5th Wheel TrailerTrailer makers typically install hitch receivers on their 5th wheel and travel trailers to enable owners to use items like an RV-approved bike rack, such as the Yakima OnRamp Bike Platform Rack # Y36FR. Not all hitch accessories can be used on trailers or motorhomes but this particular Swagman carrier can be used on ANY vehicle, car, truck, van, pop-up camper, 5th wheel or motorhome. This sturdy rack is unique in this respect. Using a bike rack in the trailer's hitch will put perhaps 150-lbs...
view full answer... - Recommended Bumper Mounted Hitch for a 2021 E-Pro Travel TrailerYour only real option then would be to use a bumper mounted hitch like the Curt RV Bumper 2" Trailer Hitch Receiver # E-100. This hitch would get bolted on a 4" square channel bumper, and has a max capacity of 3,500 lbs and a max tongue weight capacity of 350 lbs.
view full answer... - Weight of Ultra-Fab 2 Inch Motorhome Receiver # UF35-946401Minus the packaging and the U-bolts, the 2 inch bumper mounted motor home receiver weighs right at 5 lbs. This particular receiver is intended for hitch accessories only, not for towing purposes. The weight capacity of the receiver is 200 lbs or the capacity of the bumper its attached to, whichever is lower. If used on the rear of a trailer, make sure the hitch mounted accessory is approved for use on the rear of a trailer, as an accessory on the rear of a trailer will be subjected to much...
view full answer... - Trailer Hitch for Use on 2011 Country Cruiser Camper to Pull Small Utility Trailer for Golf CartWe offer two types of trailer hitch for use on the back of a trailer, bumper-mount and frame-mount. A bumper-mount hitch like Ultra-Fab # UF35-946402 bolts on to your 4 x 4-inch continuously-welded bumper with included U-bolt hardware and provides a 2-inch receiver opening for use with accessory items like a bike rack or for light towing. An example of a frame-mount hitch is Curt's Adjustable Width Trailer Hitch # C13701 that fits to trailer frame widths from 18- to 51-inches. All such...
view full answer... - How to Determine the Compatibility of 2 RV Bumper Trailer Hitch Receiver E-100 With a Pop-Up CamperYes, the Trailer Bumper Hitch Receiver, part # E-100, can be used on towable pop-up camper units with up to a 4 inch square bumper. However, you cannot exceed the limits of your camper bumper. The bumper towing and tongue capacities may be indicated on the bumper itself, but if not you could check your camper owner manual or contact the manufacturer of your camper. You can view some general information on towing and the rest of the RV bumper hitches we offer at the links provided.
view full answer... - Can Curt Bumper Mount Trailer hitch E-100 be Installed Upside DownThere's no reason you couldn't install the Curt Hitch part # E-100 with the hitch opening above the bumper. I spoke with my contact at Curt to see if there were any restrictions or further limitations by using this hitch upside down and he told me that you will have no problem using it that way. There are only certain bike racks that are rated for use at the back of an RV or trailer. I have included a link to the options to the right for you. I recommend the # S63381. Make sure the bumper...
view full answer... - Will the # 64025 Swagman RV 2 inch Receiver Bumper Mount Adapter Mount Underneath the RV BumperOne option we have for mounting a receiver under the bumper of your RV is the RV Bumper 2 inch Trailer Hitch Receiver, item # E-100. The only problem I see with the location you are suggesting is the distance from the bottom of the receiver to the road surface. If there is not enough clearance the clamp on hitch, bike rack shank or bikes themselves may make contact with the road and damage one or all of the components including the RV bumper. I spoke with my contact at Swagman and was...
view full answer... - Could the Curt RV Bumper Trailer Hitch Receiver E-100 Tow a Trailer with a Golf CartThe Curt Hitch part # E-100 can tow a trailer that weighs up to 3,500 lbs. You would need to consider the weight of your trailer when it is loaded to determine if that would be adequate capacity. You also would need to consider the towing capacities of the bumper you would install this on. You would need to contact the manufacturer of the RV that info.
view full answer... - Curt RV Bumper Hitch Receiver For 4 Inch Square Bumper Compatibility with Aluminum Decorative CoverThe Curt RV Bumper 2" Trailer Hitch Receiver # E-100 is designed to fit 4 inch square bumpers. The inside is just a hair over 4 inches as you can see in the video so you will want to measure the bumper with the cover to determine fit. It should be noted that steel and aluminum don't pair well and galvanic corrosion can occur between the dissimilar metals if they are bare. This hitch does have a powder coat so that shouldn't be an issue, but something to consider as you may choose to...
view full answer... - Curt Trailer Hitch Recommendation for Fitting Bumper at Rear of CamperWe have trailer hitches from Curt that are designed specifically for attaching to a camper's bumper. If the bumper is 4 inch by 4 inch we have the part # E-100. If the bumper is 4 inch by 2 inch we have the part # C19101.
view full answer... - Can the Curt RV Bumper 2" Trailer Hitch Receiver Be Used to Carry a ScooterThe Curt Adjustable Trailer Hitch Receiver part # C13701 is going to be the better option for your cargo carrier and scooter. The Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 that you referenced does indeed have a 350 lb tongue weight rating however, the bumper on your RV is likely less. You can check this by contacting the manufacturer but I do believe the Curt Adjustable Trailer Hitch Receiver would be better suited for your application. Please keep in mind that if you are...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Installed by:
Randy B
Installed by:
Adam E
Video Edited:
Jacob T
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Stephen
3/28/2024
Paint is holding up perfectly and it’s still easy to use. If you install this on a bumper, it’s really recommended that you weld the bumper to strengthen or get some products to help out. The torque on the frame connection will rip off the bumper eventually if not reinforced