See what our Experts say about this Ventline RV Vents and Fans

• Recommended Vent Cover to Use w/ a 14-1/4" x 14-1/4" Ventline Ventadome Trailer Roof Vent
  Yes, they will. The Ventline Ventadome Trailer Roof Vent item # V2110SP-24 is compatible with the MaxxAir Standard RV and Trailer Roof Vent Cover item # MA00-933069. This cover will fit with the Ventline Ventadome item # V2110SP-24 and allow you to leave your vent open even in the rain. You can also leave the vent open when you travel to help keep the trailer cooler and expel any stale air from inside.
  view full answer...
• Low Profile Roof Vent Recommendation for Camper
  The lowest profile roof vent we have that has a fan built into it was the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K which when closed sticks up 4-1/4 inches from the roof it's installed on. (edit: now the lowest profile is the part # MA00-04301M which sticks up 2-7/8 inches). You'd have to measure to be sure that would fit under your roof rack or not.
  view full answer...
  
• How Tall is the Metal Low Profile Replacement Cover for a Ventline Ventadome V2110?
  Hey mystery person! The Metal Low Profile Replacement Cover item # BV0534-00 is only 1.4" tall. It measures 14-1/4" long x 14-1/4" wide. It's designed to replace Ventline Ventadome roof vents model V2110 like item # V2110SP-24. What kind of roof vent do you have?
  view full answer...
• What RV Roof Vent Lid Material Would Hold Up Best Over Time
  Hey Chip, yes I agree the metal lid of the Ventline Ventadome part # V2110SP-24 is going to hold up the best over time which would mean you wouldn't have to worry about replacing the lid for a very long time. How old is the trailer?
  view full answer...
• Is the MaxxAir Mini Trailer Roof Vent # MA00-03700 Plastic or Metal
  The MaxxAir Mini Trailer Roof Vent # MA00-03700 that you referenced is made out of a durable plastic that actually does a really good job against the sun. If you wanted a total metal vent then you could use the Ventline Ventadome Trailer Roof Vent # V2110SP-24 which is also a manually operated vent. The thing about this kit though is that it will keep out bugs and debris when left open but not rain. To keep it open while it is raining you would need to use a cover like the MaxxAir Standard...
  view full answer...
• Can a Fan be Added to a Ventline Roof Vent
  You may be able to add a fan to your Ventline roof vent without removing it but it all depends on what part number you have. I spoke with my contact at Ventline who said that the VD0433 number you gave me is only for the screen on the vent. If you have the part # V2110SP-24 that has the metal roof then my contact said that there is no way to modify it for a fan. If you have the part # V2092SP-28 then there is a way that you could add a fan. The Replacement 12V DC Motor # BVD0218-00 and...
  view full answer...
• Can the Ventline Ventadome Trailer Roof Vent Be Installed on a Van
  Yes, you can use the Ventline Ventadome Trailer Roof Vent part # V2110SP-24 on your 2017 GMC Savana Van. However, it is designed for a roof thickness between 1-7/8" to 3". Therefore, if you don't meet the minimum requirement of 1-7/8" you will need to make some sort of spacer to make up the difference as the roof on your Savana Van is likely not very thick. For an alternative option that will fit a thinner roof (1-1/2") and won't require as much cutting, we have the Ventline Vanair Trailer...
  view full answer...
• Does Knob of Ventline Ventadome Trailer Roof Vent # V2110SP-24 Stick Down Further Than Vent
  Yes, the turn knob for the Ventline Ventadome Trailer Roof Vent # V2110SP-24 that you referenced does sit higher than the flange surface of the vent. It would not stick further down than the rest of the assembly so it would not make the ceiling shorter there. I attached a picture that shows this as well.
  view full answer...
  
• Is There a Replacement 9" x 9" Roof Vent for a Horse Trailer
  I do have an option for you but the industry has transitioned away from the 9"x 9" trailer roof vents in light of 14" x 14". We don't offer any 9" x 9" trailer roof vents, you may still be able to find one but a better option would to upgrade now to the larger opening size as you won't ever have to run into this same issue again and with a 14" x 14" opening you have many more choices and tons of replacement parts to choose from. I recommend the Ventline Ventadome Trailer Roof Vent part...
  view full answer...
• Roof Vent Recommendation for Metal Roof Lid on 2922 Trailer
  To get a metal vent cover roof vent on your trailer you would have to replace what you have on your trailer with the part # V2110SP-24 like you mentioned. It does attach by using screws that attach through the outside like what you see in the picture I attached. If your current vent is a Ventline this will mate with the garnish easily.
  view full answer...
  
• Replacement Ventline Roof Vent for 1969 Shasta Compact
  The Ventline roof vent part # V2110SP-24 would be a great replacement to what you have and would fit perfectly as it's designed to fit the same opening. It has a metal lid too which will last a long time.
  view full answer...
  
• Recommended Replacement 14-1/4" x 14-1/4" Vents For Horse Trailer
  We can definitely help with this. I suggest either the Ventline Ventadome Trailer Roof Vent, # V2110SP-24 that is a manual lift vent with a metal lid. Or, the Ventline E-Z Lift Ventadome Trailer Roof Vent, # V3092-601-00 which is also a manual lift but has a translucent white lid that allows some light to come through. Both are typical 14-1/4" x 14-1/4" size so should be a perfect fit for your situation. Please note the product review videos linked below along with an installation...
  view full answer...
• Availability Of Roof Vent With Metal Lid
  I have a complete replacement roof vent option for you, but there is not a metal version of the Replacement Dome for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic # BVD0449-A01. To use a metal lid you will need to replace your roof vent with the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal # V2110SP-24 which is the only roof vent with a metal lid that we currently offer. To make sure you get a leak free install I recommend using Roof...
  view full answer...
• Recommended Low-Profile Trailer Roof Vent for Maximum Garage Clearance
  I went to our warehouse to measure the roof vent that I think will be your best option, Ventline # V2110SP-24. This manual vent has a flat metal lid that extends exactly 2-inches above the top of the mounting flange surface when fully closed. Please refer to the photo I prepared for you. My contact at Ventline confirmed that this vent has the lowest installed height of their current offerings. Domed-lid vents like Camco # CAM40480 offer less clearance due to the raised profile of the...
  view full answer...
  
• Recommended Vent Cover Lid For A Ventline Ventadome Trailer Roof Vent
  The Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Metal # V2110SP-24 has a continuous hinge style so the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White # BV0554-01 would be a compatible fit. I recommend getting the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black # MA86JR so that you can keep the vent open during inclement weather and while traveling down the road. This cover will has angled louvers to allow smoke, odors, and stale...
  view full answer...
• Will the Ventadome Replacement Operator with Knob Work on a Plastic Roof Vent with Crank Handle
  Knob or crank handle is just a change in design, we need to determine how the lift bar attaches to the plastic cover on your roof vent. The operator you selected, # BV0115-04, will work with roof vent covers that have a slot that the rivet head at the end of the operator arm slides into and is then clipped in with the metal clip shown in the photos on the product page. Older plastic roof vents have a slotted bracket that is riveted in the underside of the roof vent so this operator arm...
  view full answer...
• Could Ventline RV Roof Vent Install on 1 inch Thick Roof
  Hey Scott, yes the Ventline Ventadome RV roof vent part # V2110SP-24 can be installed on an RV roof vent that is 1 inch thick. You would just need to trim down the garnish to 1 inch so that it wouldn't be too tall and you'd be set.
  view full answer...
• Will This Roof Vent Install Kit # 344270KITW Come With Enough Tape & Sealant For Multiple Installs?
  This kit # 344270KITW comes with 60 feet of butyl tape. With the two 6 inch fans # VP-543SP you won't use much and even if you installed two of the Ventline roof vents # V2110SP-24 you will have plenty of tape and sealant to get the job done, no problem.
  view full answer...
• Replacement Lid And Operator Kit Recommendation For Ventline Ventadome Roof Vent
  If the vent you have installed on your trailer has a 4-point hinge like the attached photo, part # BVD0449-A01 would be the replacement lid for your Ventline roof vent. We do not offer a metal replacement lid with a 4-point hinge. The replacement knob and operator you asked about for your fan is part # BVD0462-00. If you want to replace the vent with one that has a metal lid I recommend part # V2110SP-24. This will fit in a rough opening that measures 14-1/4 inches wide x 14-1/4 inches...
  view full answer...
  
• Shroud for Lippert 5th Wheel Pin Box 1621 and 1116
  We do offer king pin shrouds for two of the most popular 5th wheel pin boxes. You can see all of these on the linked page. For example, if you have a Lippert 1621 pin box we have a white cover available in white with part # LC301458.
  view full answer...
• Mounting Hole Spacing for Replacement Operator w/ Knob and Screw, # BV0115-04
  I went out to the warehouse and measured a Replacement Operator w/ Knob and Screw, # BV0115-04. The center to center distance between the mounting holes is 2-3/8 inches. It is designed as a replacement for Ventline Ventadome Trailer Roof Vent, # V2110SP-24. If you have a Ventline roof vent that has the plastic wedge style lid, then you will need Replacement Operator, Knob and Screw, # BVD0462-00. This kit fits V2092, V2094, and V2119 series vents.
  view full answer...
  
• Recommended Replacement Power Tongue Jack For a 2019 Airstream 27' Travel Trailer
  The Lippert Smart Jack Electric Trailer Jack # LC643589 is my go to jack for travel trailers like your 2019 Airstream. This jack has a memory feature that allows you to program in the hitch height of your truck making connecting and disconnecting much easier. All you will have to do is set the jack to return to hitch height when you are ready to connect to the trailer or are raising it off your truck. No more standing around holding a switch until it reaches the right height. It also has...
  view full answer...
• Will Ventline Ventadome Trailer Roof Vent Fit 14 x 14 Opening
  All trailer roof vents nowadays fit what is referred to as a standard roof vent opening, which is described as "roughly" 14-1/4" x 14-1/4" so the Ventline Ventadome Trailer Roof Vent # V2110SP-24 might be able to squeeze into a 14" x 14" opening but in reality it is pretty situational as most openings aren't exactly 14" x 14" or 14-1/4" by 14-1/4" because of the minute nature of the measurement. So it is a possibility you will need to trim the opening of your roof ever so slightly to get...
  view full answer...
• Dimensions For The Ventline Ventadome Trailer Roof Vent # V2110SP-24
  I walked out to our warehouse and pulled the Ventline Ventadome Trailer Roof Vent, part # V2110SP-24, from our inventory to measure. The outside edge of the vent flange measured approximately 16-1/2 inches square. The actual opening of the vent measured approximately 14-1/2 inches square. The depth of the vent from the inside flange to the outside flange measured approximately 2 inches tall. I took a picture of Roof Vent # V2110SP-24 and used Photoshop to illustrate the measurements.
  view full answer...
  

Do you have a question about this RV Vents and Fan?