Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for Class A motorhomes with HWH and Atwood leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.
Features:
Specs:
Check the listings below for some of the most common rigs that are compatible with this system. Note: You will need to measure your jacks to confirm compatibility, as the foot size/shape of the jacks on your leveling system can vary from model to model and year to year.
SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.
Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com and today we're gonna take a look at the Snap Pad Highway 10 Bus Jack Pads. These four heavy duty rubber pads are going to snap onto your Class A motor homes with HWH or Atwood leveling systems with 10 inch in diameter jack feet to make leveling faster and easier, eliminating the need to crawl under your motor home to position plastic pads or wood blocks. Now it is recommended to measure your jacks to confirm compatibility as the foot size and shape of the jacks on your leveling system can vary from model to model and year to year. Now let me go ahead and give you some overall measurements of these pads. So looking at the overall diameter, as you can see, we're sitting right at 11 and three quarters inches. And then looking at the height, we're sitting right at two inches tall.
And that's going to be the same measurement for the three other pads here on my table. So again, this is going to fit into your 10 inch jack foot and the increased surface area of the jack feet provide added support for your motor home, preventing sinking into soft ground, unlike smaller metal feet. Now these pads are made here in the USA of durable heavy duty rubber that are actually made from recycled tires. They are going to grip uneven terrain and prevent your metal feet from rusting or bending. And the built-in drains are going to release moisture to prevent your jack feet from corroding.
They're also going to serve as a cushion, so your metal feet won't crack or chip away at your driveway and they're going to help dampen vibration from inside your motor home that could cause shifting. Now, there's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you. These are going to be a simple one-time installation. You're just going to line up the pads beneath your jack feet and lower each foot until the lip of the pad fully engages and locks in place. You're actually going to hear a snapping sound once the pad is securely installed.
Insulation is permanent, so once you have the snap pads secured, you're never gonna have to worry about crawling under your RV to place pads again. Well, that's gonna conclude our look today. I do hope it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Average Customer Rating: 4.8 out of 5 stars (4191 Customer Reviews)
Perfect for Class A motorhomes with HWH and Atwood leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds extra stability on soft ground. Includes (4) pads.I am sure that this is not the fault of the product, but our pads will not snap onto the feet of our jacks. The jack feet sit ON the pads, but will not snap into the groove. I am sorry, but we will have to return these.
J
3/29/2023
Thank you for your reply and suggestions. We have tried using soap on the rim of the pad to get the foot to slice in easier to no avail. We are currently out on a trip but will be back home by Sunday. The feet on our HWH system have slightly raised lips they are not dead flat like shown on the Snap Pad site We will try using a block to lift up one side of the pad so that it might slide in better like using a shoe horn as you suggested. My wife is concerned that one of the feet is a little bent and will not fit into the pad so I was going to use a block on that pad anyway. We will try to get the pads to snap on when we get back home...will keep you posted.
A must have add on, saves worry about slipping on concrete also provides a larger footprint for softer ground, I seldom use any blocking.
Work as expected. Money well spent
Karri
7/21/2023
One year later, no issues. Works just as good as day 1.
We put the pads on our 2000 Fleetwood Southwind they work great on all surface without sinking in.
They are a great improvement for all motorhome and Rv.
These pads are great! And as always etrailer is the best price with free shipping. I’m a happy camper!!
Seems very good quality and fairly easy to install
Excellent product. Installation was a snap. Also appreciate the quick delivery. Y'all do good work!!
I had seen a camper with the pads on the jacks and thought they were a good idea. I received mine and had them on in less than 10 minutes. I am very pleased with them. "Thanks etrailer"
The snap pads were easy to install and provide excellent weight distribution on hard and soft surfaces. These pads are designed to be permanently attached, avoiding taking up valuable storage space and having to climb under the vehicle during leveling. Of note: snap pads reduce ground clearance by 1 full inch, and caused dragging resulting in damage / losing the rear pads of steep curbs. Recommendation is to shave the rear pads by 1/2 inch to increase ground clearance (see photos).
The snap pads are great! They were easy to in stall, and and add stability. Great product. Everything we have bought for our RV at etrailer has been a quality product!
I installed the snap pads on my RV. I thought they were on OK got to the camp ground on first trip and one pad was gone. Checked and the other were not on fully. I ordered a new pad but have not tried to put them back on. The snap pads did not snap on even with Dawn...that was a year ago and I do not have a lot of confidence they will snap on when I lower my jacks. I have a concrete drive but the pads on my RV just did not snap in like they should. Snap pads worked fine on my Big Foot levelers on my last RV.
After researching the correct SnapPads for my RV I was able to find them on etrailer at a very competitive price with free shipping. They arrived one day earlier than posted, even though they are hard rubber they were packaged very securely.
One thing that would have been helpful when we received our original four snap pads would have been the tip of putting dish soap around the edge of the pad so as to easily snap into place. If this would have been present in the box we wouldn't have damaged the 1 pad that we were having a hard time getting on. My suggestion would be to have something written about the installation and using dish soap to glide on easily. Also there is a video on the snap pad site for installation. This would have been helpful to know.
"I recently needed snap pads for my class A motorhome and had trouble finding the exact ones online. After searching extensively, I contacted etrailer and spoke with Kelsey. She was incredibly helpful, asking all the right questions to ensure I got the correct pads. Within a few days, I received the pads, which were extremely easy to install, taking less than 15 minutes. They look and work great. Thank you to etrailer and a special thank you to Kelsey for her excellent service!"
Looks like a great product. I'll know more after the first trip with then on. Got to tell you they're a little tricky to install. Watched a couple of YouTube videos. The installation instructions say to use dish soap (Dawn) as a lubricant. Specifically says don't use silicone lubricants (WD-40). Had a little battle getting them on all the way. They would go on one side or the other, but not snapped in all the way around the foot of the jack. I ended up using a piece of 1/2" rebar under the pad on the side that wasn't all the way on. Put the jacks/pads down on the rebar and it popped the rest of the way on.
Outstanding customer service. Excellent price. SnapPads arrived two days earlier than projected delivery date. Pads were easy to install on our van.
Thank you.
Definite addition to the upgrade that I made increasing from 9” landing jack feet to 12” landing jack feet on our diesel pusher motorhome. These 12” snap pads will allow me to distribute load better over soft ground and not punch holes in the gravel or soft sites. Plus if I need to add blocks under feet, there will be no worrying about movement of jack feet off of the blocks.
SnapPads are a convenient addition to my fifth wheel however the metal front pads hold water and if I remove the SnapPads to clean & preserve them, then the warranty is voided.
These Jack pads have been an excellent addition to my 5th wheel. Easy to put on and they do exactly what are designed to do.
They are the best thing i bought for my 5th wheel trailer i just poured a little dish soap in them and lowered the legs and they snapped into place no more putting pads under legs just pull into camp site and level trailer without trying to line up pads each time.
Snap Pads arrived quickly. Will be installing them this week. Looking forward to not crawling under the trailer. Friends have these and love them.
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/28/2023
I would like to see if I can help. Would you be able to send a picture? Do you have a HWH or Atwood leveling system with 10-inch round feet? We have had Snap Pad recommend lifting the jack foot up 3-4 inches and using a shim to pry the corner of the pad up and help as the jack foot comes back down, sort of like using a shoe horn to get your foot into a shoe.