Video Transcript for Review of Phoenix USA Wheel Covers - Replacement Rear Wheel Hub Cover - PXPQ1101RHC

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement Phoenix USA chrome plastic hub cover for a 19 and a half inch and a 22 and a half inch rear wheel that has an eight on 275 millimeter bolt pattern. Now this part here will replace a damaged or missing Phoenix USA hub cover on your RV truck or trailer using this exact replacement. To install this, this will mount easily under your wheel's factory lug nuts to protect against dirt and moisture. And then once your lug nuts are put on to hold this in place, you can use your existing lug nut covers on it. Or if you need the lug covers, we also sell them separately.

As we mentioned, this will fit a rear wheel size of 19 and a half inches with the eight on 275 millimeter bolt pattern and the 22 and a half inch rear wheel with the same eight on 275 millimeter bolt pattern. This is a durable chrome ABS plastic construction. Now this center cap right here, this is a pop out center cap. And the reason they do that, it gives you easy hub access for any axle maintenance. And just to show you how it pops out, if you look on the side, there's gonna be a little opening right here and then one right over here.

So really all you have to do is on either one of those opening, take a nice wide flat tip screwdriver, stick it in there and just twist it and you can see that it'll pop it off. Once you twist it, the cap will pop off. And with this still installed on your wheel, when you pop that off, it'll give you access to that axle. And as you can see, they do have little supports here. So when you put your screwdriver in there, you're not breaking it or cracking it.

And then once you're done, all you have to do is line those cutouts, which where those supports are, just like that, and then tap it on. And now you're all ready to go. Now we do also offer this part as a complete kit with the lug nut covers if you want. They are available and the part number for the 22 and a half inch wheels that use 30 millimeter lug nuts would be PXQ820R, and the cover for the 19 and a half inch wheels that use the 22 millimeter lug nuts would be part number PXQ822R. Last thing I want to give you is a few dimensions on this.

The overall diameter, one side to the other is gonna be right at 13 and 13/16 inches. The overall height from the bottom to the very top part is gonna be right at about eight inches tall. And this part is for a quantity of one hub cover. But that should do it for our look at the replacement Phoenix USA chrome plastic hub cover for the 19 and a half inch and the 22 and a half inch rear wheels with the eight on 275 millimeter bolt pattern.