bing tracking image
  1. RV Camera System
  2. Voyager
  3. Backup Camera
  4. 4.3 Inch Display
  5. Built-In Microphone
  6. Mirrored Image
  7. Night Vision
  8. Waterproof
Voyager WiSight 2.0 Wireless Backup Camera System w Night Vision for Prewired RVs - 4.3" Screen
Voyager

Voyager WiSight 2.0 Wireless Backup Camera System w Night Vision for Prewired RVs - 4.3" Screen

Part Number: ASA24YR
In Stock
$331.36
Retail:$499.99
You Save: $168.63
RV Camera System
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full rv camera system installation instructions. Great price Quantum Sprinter Motorhome rv camera system and expert service. Thor Quantum Sprinter Motorhome, 2018 rv camera system by Voyager are available from etrailer.com. For expert service call 1-800-940-8924 to order your Voyager WiSight 2.0 Wireless Backup Camera System w Night Vision for Prewired RVs - 4.3" Screen part number ASA24YR, or order online at etrailer.com.
  • All Info
  • Reviews (244)
  • Q & A (0)
  • Photos

Voyager RV Camera System - ASA24YR

  • Backup Camera
  • 4.3 Inch Display
  • Voyager
  • Built-In Microphone
  • Mirrored Image
  • Night Vision
  • Waterproof
  • 1 Camera
  • Wireless Signal
  • Suction Cup Mount
  • Below Rear Clearance
  • 70 Degrees

Wireless camera plugs into your factory pre-wired Voyager WiSight plate for real-time, crisp video while backing into the campsite. Built-in microphone and speakers help you communicate with a friend outside your RV as you back into a tight space.


Features:

  • Wireless backup camera system improves rear-view visibility for your RV or camper
    • Designed for RVs with a factory-installed, Voyager WiSight pre-wired plate
    • Minimizes blind spots and helps prevent accidents
    • Supports up to 4 wireless cameras (additional cameras sold separately)
  • WiSight 2.0 technology digitally transmits high-quality, uninterrupted signals up to 60' away
    • Provides real-time video footage at highway speeds
    • Eliminates interference from smartphones, routers, and other devices
  • Included CMOS camera creates digital video in full color
    • 122-Degree wide viewing angle gives you optimum visibility while in reverse
  • 14 Infrared LEDs surround the camera lens to provide nighttime vision up to 30'
  • 4.3" Full-color LED monitor has color-coded, rear assist marker lines that show distance from other objects
    • Brightness, color, contrast, and image orientation can be easily adjusted
  • Integrated microphone and speaker make it easy to get help backing up
    • Microphone on camera picks up your friend's voice outside the RV
    • Speakers on monitor let you clearly hear your friend's instructions
  • Durable metal housing is waterproof and dust resistant
    • IP69-rated to protect against close-range, high-pressure spray downs
  • Simple installation - minimal drilling required
    • Monitor suction cups to your dashboard or windshield
    • Camera plugs directly into your RV's pre-wired plate and secures with OEM screws
  • 1 Camera, monitor, 1 monitor mount and 12V DC power cord are included


Specs:

  • Monitor:
    • Overall dimensions: 5-3/4" wide x 3-1/4" tall x 7/8" deep
    • Screen size: 4.3"
    • Resolution: 480 x 234
    • Brightness: 500 cd/m2
    • Contrast ratio: 500
    • Voltage: 12V DC
    • Wireless range: 60'
    • Video format: NTSC
  • Camera:
    • Overall dimensions: 5-5/16" wide x 2-7/8" tall x 2-15/16" deep
    • Mounting hole spacing (center to center):
      • Horizontal: 3-15/16"
      • Vertical: 1-7/16"
    • Viewing angles:
      • Diagonal: 122 degrees
      • Horizontal: 91 degrees
      • Vertical: 65 degrees
    • Camera resolution: 520 TV lines
    • Wireless range: 60'
    • IP rating: IP69K
    • Voltage: 12V DC
  • 1-Year warranty


Note: Not compatible with first generation WiSight technology products.


After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system plugs into your RV's pre-wired Voyager WiSight technology plate to give you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.


Enjoy Uninterrupted Wireless Signals

The WiSight 2.0 technology digitally locks the camera and monitor together, transmitting strong, interference-free signals up to 60'. This means that you'll have sharp, real-time video footage whether you're on the road or at the campsite, and you are less likely to have interference from smartphones, routers, and other devices.


Easily Communicate from Outside Your RV

Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.


Avoid Collisions While Backing Up

No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.


Voyager RV Backup Camera Infrared LEDs

And because this camera has 14 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 30' should you arrive at the campsite after dark and need to back up into your parking spot.


Withstand Multiple Climates and Environments

If there's a torrential downpour, or if you just simply need to wash your RV, the waterproof, IP69-rated camera will be protected against close-range, high-pressure spray downs. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.


Installs Onto Your Dashboard and RV Rear

This camera system includes a suction cup mount that you can use to stick the monitor onto your dashboard or windshield. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.


This wireless camera is designed for RVs that have a factory-installed, Voyager WiSight pre-wired plate, which makes installation incredibly easy. All you'll need to do is plug the camera directly into the socket on the pre-wired plate - drilling isn't required. Then bolt it down with your OEM screws.



WVSXP43 Voyager WiSight 2.0 RV Wireless Backup Camera System for Pre-Wired RVs - Night Vision - Suction Cup Mount - 4.3" Screen

Replaces WVHS43


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.5

243 reviews
Wireless camera plugs into your factory pre-wired Voyager WiSight plate for real-time, crisp video while backing into the campsite. Built-in microphone and speakers help you communicate with a friend outside your RV as you back into a tight space.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
243
Show More Reviews

See what our Experts say about this Voyager RV Camera System

  • Backup Camera & Monitor For Trailer Pre-Wired With Voyager WiSight Plate
    Thanks so much for the photo, it was super helpful, and what it shows is that your trailer has the Voyager WiSight Pre-Wire Plate. This will allow you to mount the Voyager WiSight camera system: - Voyager WiSight Wireless RV Backup Camera System # ASA24YR This camera is super easy to install because your trailer was pre-wired; all you need to do for the camera is remove the plate, which is held in by screws, and there will be a connector under the plate for the camera. Then mount the...
    view full answer...
    Image 1 for
  • Troubleshooting A Voyager WiSight 2.0 Camera System That's Constantly Losing Signal
    Hi Lynda, The distance between the camera and monitor shouldn't be more than 60' for your setup so I would check the voltage getting to your camera. A weak signal is usually a sign that the running light circuit isn't providing enough voltage for the camera to operate. You'll need to remove the camera to get the to where the installer tied into the running light circuit with the camera and then test the voltage with a multimeter # PT89ZR. If you're seeing less than 12 volts you'll want...
    view full answer...
  • How To Pair A Voyager WiSight 2.0 Camera And Monitor Together
    The camera for the Voyager WiSight 2.0 Wireless Backup Camera System # ASA24YR can not be powered until the monitor is powered and ready to pair, which is why you saw that the headlights need to be turned off to stop power from reaching the camera. I've added the instructions below to walk you through the pairing process. 1. Make sure the monitor is connected to 12 Volt DC power supply, but 12 Volt DC power is removed from the camera (clearance lights turned off). 2. Press the SEL/PAIR...
    view full answer...
  • Replacing Voyager Prewiring To Install A Furrion Vision S RV Camera System
    The Voyage prewiring will have to be completely removed in order to mount a Furrion camera system # FOS43TASF. Once the cover plate is off and you get to the wiring you can cut it from the running light wiring and then splice in the connector that comes with the Furrion system and then pass it through the rubber gasket of the camera mount. You can then connect the plug from the camera to it and screw the camera mount to the wall of the trailer. I've attached an installation video I made...
    view full answer...
  • How To Identify a Voyager WiSight or WiSight 2.0 Camera on a 2016 Lance 1062.
    Since your current camera only says Voyager that means it is going to be the 1st generation. The WiSight 2.0 Camera # ASA74YR has Voyager 2.0 on the camera. So you are going want a new system with either the 4.3" Monitor # ASA24YR or 7" Monitor # ASA37YR to install on your 2016 Lance 1062 since the original WiSight cameras and monitors are obsolete. The power connection on the trailer is going to be the same so you will not need any type of adapter.
    view full answer...
  • Are There RV Cameras Compatible With The GM Infotainment System
    No, the only cameras that we currently have confirmed to work with a GMC Infotainment system are the cameras made by GM. You'll also need to check exactly which brand your 2022 Alliance Paradigm 5th wheel is prewired for. If you have a "shark fin" mount or a cover with "Furrion" on it then only a Furrion branded camera will work with the prewiring. If you have a cover with "Voyager" or "Jensen" on it then you would want to use a Voyager system. For Furrion you'll need the Furrion Vision...
    view full answer...
  • Troubleshooting Pairing Issues With A Voyager WiSight 2.0 Wireless Backup Camera System
    The Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV - 4.3" Screen # ASA24YR you were looking at is both the camera and the monitor and is the second generation of Voyager's camera systems. If you are trying to pair any parts of this system with the old system then that would be your issue since first generation and second generation cameras and monitors can not communicate with each other. I've attached the pairing process instructions below: If you're...
    view full answer...
  • Is The 2022 Winnebago Micro Minnie 1700BH Prepped For a Voyager WiSight 1.0 or 2.0?
    You are going to be able to use either the original Voyager WiSight or the WiSight 2.0 with the Voyager Prep on your 2022 Winnebago Micro Minnie 1700BH. The prep is simply the electrical connection and the specific mounting pattern for the screws on the rear camera. We currently only carry the 2.0 in either a 4.3" Kit # ASA24YR or 7" Kit # ASA37YR. Do note if you have a tow vehicle like a 2021 or newer Chevy/GMC you may also need the PWM Filter # VGR64VR to ensure your camera gets the...
    view full answer...
  • Backup Camera With The Largest Monitor For A Coachman 192RBS
    Hello Kim, I can definitely help with that. For your Coachman 192RBS I recommend the Furrion Vision S Wireless RV Backup Camera System # FOS07TASF. This comes with a 7" LCD touch screen monitor which is the largest monitor we offer for a backup camera system. The Furrion Vision S is a very nice camera system. The camera itself is wireless which makes installation easy. It also has built in IR lights for a clear picture, even at night. The monitor also projects clear audio sent directly...
    view full answer...
  • Can The Furrion Vision S Prewired System Be Switched to Us Voyager WiSight Camera System?
    Yes, you can remove the Shark Fin Camera Mounting Bracket # FRCBRKT-BL which includes the wiring from your 2024 Forest River Flagstaff Super Lite 26FKBS for a Voyager system. The Kit # ASA24YR you found is specifically designed for trailers pre-wired from the manufacturer for the WiSight. Instead you will want the 4.3" System # ASA84YR or 7" System # ASA57YR which includes the wiring needed to splice into the wiring when you remove the Furrion wiring.
    view full answer...
  • No Signal on Voyager
    Thank you for your purchase directly from etrailer of the Voyager WiSight 2.0 Wireless Backup Camera # ASA24YR. According to the manual, if you are getting the no signal error, here is what the manual says to look for. - Check 12VDC power at camera. - Make sure antenna is tight and pointed correctly. - Make sure monitor is set to AV1
    view full answer...
  • Furrion Backup Camera Compatibility with Voyageur Pre wIre Camper System
    We have the perfect solution but the Furrion Vision S W is not compatible with the pre wiring from Voyager. Instead the Voyager WiSight Wireless RV Backup Camera # ASA24YR is the way to go. This will allow you to use the already existing bracket to not only mount your camera but attach it to the existing plug to power it.
    view full answer...
  • Recommended Camera System For A Prewired 2021 Coachmen Chaparral 284RLS 5th Wheel Trailer
    There isn't a guide that tells us what system was prewired into your 2021 Coachmen Chaparral 284RLS but the most common setup is Furrion. The prewiring in the back should have a cover with Furrion or Voyager on it. Furrion uses a unique "shark fin" style mount (pictured below) that you can identify the prewiring by as well. If you have Voyager you'll need the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV - 4.3" Screen # ASA24YR or 7" monitor screen...
    view full answer...
    Image 1 for
  • Solution for Replacement Monitor For ASA WVCMS130AP Camera
    The Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor - 4.3" Screen # ASA87FR is only compatible with 2.0 systems. Unfortunately, your WVCMS130AP is a first generation product so there are no replacement parts available. The only option will be to completely replace your system. You can use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # ASA84YR or the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision...
    view full answer...
  • Recommended Voayger Camera System for a Pre-Wired 2022 Coachman Freedom Express
    For your 2022 Coachman Freedom Express I recommend going with the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV # ASA24YR. This system only comes with one camera and a monitor, which sounds like exactly what you're looking for. Also, this is the smallest monitor offered with a screen size of 4.3". To install this system you'd just need to plug the camera into your pre-wired port on your trailer, and plug the monitor into a cigarette lighter outlet inside...
    view full answer...
  • What Does Pre-Wiring Mean For RV Back Up Camera Systems
    RV manufacturers have started running wiring and mounts for specific camera brands, i.e. Furrion or Voyager. The Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV # ASA24YR you were looking at mentions "pre-wiring" because it's ready to simply plug right in to Voyager branded pre-wiring on the RV.
    view full answer...
  • Is Voyager WiSight Backup Camera System Compatible with 2020 Chevy Silverado
    Since the newer model pickups tend to have problems recognizing the Voyager WiSight # ASA24YR you'll likely need to use an adapter like part # FR87PR. What this Furrion adapter does is draw more power so that the truck can recognize and send power back for the camera. Another more permanent solution is to splice the PWM Filter # VGR64VR behind the camera to provide steady current for proper operation.
    view full answer...
  • Can Trailer Pre-Wired For Voyager Camera Use Furrion Camera
    The plugs are different, but if you like you can still use the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF. To do this you would need to wire it yourself as opposed to using the pre-wiring for the Voyager system. Otherwise, if you want to use the pre-wiring on your trailer you will need to stick with the Voyager system that works: - Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV - 4.3" Screen...
    view full answer...
  • What Type of Plug is on Trailer Pre-Wired for Furrion Camera System
    In regards to the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF, the male end is on the camera side and the female end is on the trailer side. If the trailer was pre-wired correctly for the Furrion Vision S Wireless RV Backup Camera System it would have a female plug behind the cover which matches up with the male plug on the camera. The plug is actually included with the kit so if you didn't have the correct one you'd simply just wire the one that came with the kit,...
    view full answer...
  • Recommended Backup Camera System to Plug Into Voyager Wi-Sight Pre-Wiring on 2021 Coachmen Apex
    The Voyager WiSight Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # ASA24YR system you were looking at plugs directly into the pre-wired socket on your 2021 Coachmen Apex Ultra Lite, so this is a great choice. I really like that this system has a built in microphone to allow you to not only see what's going on behind you, but hear any instructions that might be getting called out. It's also got the ability to see at night, so it's a great solution to have when...
    view full answer...
  • Voyager Wireless Camera System Factory Prepped 2022 Coachmen Freedom Express Travel Trailer
    We have either the 4.3" # ASA24YR or 7" # ASA37YR Voyager WiSight which is specifically designed for the factory prep which you have on your 2022 Coachmen Freedom Express 252RBS. There are currently no adapters allowing you to use this camera on your truck monitor or cell phone.
    view full answer...
  • Ball Joint Diameter for Voyager WiSight 2.0 Wireless Backup Camera System
    The ball joint for the suction cup mount that fits the Voyager WiSight 2.0 Wireless Backup Camera System # ASA24YR has a 0.7875" diameter. Attached is a photo showing this as well as a review video for you to check out.
    view full answer...
    Image 1 for
  • Correct Backup Camera System for a Coachmen Apex Ultra Lite
    The Coachmen Apex Ultra Lite is pre-wired for the Voyager WiSight 2.0 Wireless Backup Camera System, part # ASA24YR for a 4.3" monitor or part # ASA37YR for a 7" monitor. This is the only system which will plug into the rear camera port without any additional wiring required. Unfortunately, we don't carry Haloview so I don't have any adapters for you but if you reach out to them directly they may be able to assist you further.
    view full answer...
    Image 1 for
  • Installing a Voyager WiSight 2.0 Camera in Prewired 2019 Lance 855 Truck Camper
    You are just fine; it will work with the prewiring in your 2019 Lance 855. While correct that a 2.0 will not work with a 1.0 system this is making reference to intermixing the cameras and monitors. The prewire plate on the back of the trailer is neither 1.0 or 2.0 - it's just power and ground. So, your Voyager WiSight 2.0 Wireless Backup Camera System, # ASA24YR while work fine with the prewiring in your 2019 Lance 855.
    view full answer...


< Previous



Do you have a question about this RV Camera System?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Edited by:
Amanda M
Employee Michael B
Installed by:
Michael B
Employee Adam Y
Written by:
Adam Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<