Voyager Wireless Camera System Factory Prepped 2022 Coachmen Freedom Express Travel Trailer  

While there is not a plug-n-play adapter to change from on brand to the other, you can still use the wires from the pre-wired Voyager system on the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision, #FOS05TASF by cutting the…

The reason why you would need the #VGR74VR filter to use the #ASA37YR is because your 2022 GMC Sierra 1500 will have pulse width modulation (PWM). This means it won't send consistent power back to the camera and you're going to lose…

Your 2020 Micro Minnie is wired for the Voyager observation camera setup which means the correct kit is the part #ASA24YR.

The plugs are different, but if you like you can still use the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen #FOS05TASF. To do this you would need to wire it yourself as opposed to using the…

Thanks so much for the photo, it was super helpful, and what it shows is that your trailer has the Voyager WiSight Pre-Wire Plate. This will allow you to mount the Voyager WiSight camera system: - Voyager WiSight Wireless RV Backup Camera System…

We do have what you need, but since your 2022 Winnebago 2529RG is prewired for the Voyager system you will not want to use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR that you were looking at. Because you will…

I took a look at your Voyager WiSight RV Observation Camera - Wireless #WVH100 and the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR you mentioned you have, and it actually does not appear that these two are compatible…

The Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV - 7" Screen #ASA37YR is the only way to get a 7" monitor but it won't be compatible with the Voyager side marker cameras because they are first gen.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Since your current camera only says Voyager that means it is going to be the 1st generation. The WiSight 2.0 Camera #ASA74YR has Voyager 2.0 on the camera. So you are going want a new system with either the 4.3" Monitor #ASA24YR or 7"…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…