See what our Experts say about this Rhino Rack Roof Rack

• Recommendations To Be Able To Carry Cargo On 2014 Nissan Pathfinder With Naked Roof
  We do not have a roof rack available for the 2014 Nissan Pathfinder with no factory side rails. I checked with Yakima and Thule and Rhino Rack and there is no roof rack compatible with the roof. If you are interested in carrying bikes or cargo let me know and I can make some recommendations that will work for you.
  view full answer...
• Cross Bars for 2021 Jeep Rubicon With Sky One Touch Top
  Yes, we have something for this, I suggest the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 59" # RB1500, and the 8" Tall Gutter Feet, # RL210S2 or event the # RL280S4-2. These roof-rack legs are designed to mount on your vehicle's factory rain gutters and mount with included brackets and hardware, no drilling required. With that set-up you can then use the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs, a J-Style - Folding - Side Loading type carrier, # S512-S512X. Or, my preferred,...
  view full answer...
• Will a Paddleboard Fit a Rhino-Rack Roof Rack on a 2015 Jeep Wrangler with a Hard Top
  Rhino-Rack SG Roof Rack # RRSG60 for rain gutters has a capacity of 88 pounds so provided that your 11 foot paddleboard is under 88 pounds then it can support the board. However, this roof rack has a narrow bar spread of 19 inches from the center of one bar to the center of the other bar meaning you would need to make certain that the board is tied down at the bow and stern and placed so that the weight is evenly distributed to both bars. Also since the crossbars are basically positioned...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• How Was Rhino Rack Roof Rack Spread for 2014 Chevy Silverado 1500 Decided
  Roof rack companies like Rhino Rack pick the required spread for their roof racks like the # RB1500, # RRRLKHD, and # DK377 based on where the roof is reinforced the best. We have to recommend you always go with the required spread, otherwise you could potentially damage the roof of your vehicle or the rack may not secure properly. Even though the spread is narrower than you'd like (most racks are right at this same spread) you can still use a canoe carrier like the Yakim KeelOver # Y04069...
  view full answer...
• Will the Rhino-Rack Heavy-Duty Roof Rack Fit 2015 Ram 1500 Crew Cab with Sunroof
  Yes, the Rhino-Rack Heavy-Duty Roof Rack, which consists of parts # RB1500, # RRRLKHD, and # DK043, will fit your 2015 Ram 1500 crew cab with a sunroof. Placement of the crossbars is very specific and I have included an attachment which illustrates the measurements for your Ram, as well as the measurement process. With these measurements you will be able to determine exactly where the crossbars will sit in comparison to your sunroof.
  view full answer...
  
• Dual Kayak Carrier For 2017 Ram 1500 With Tonneau Cover
  I would recommend getting the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1500, the Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK043. I've included a video to help you install if you wanted to go that route. Then the most cost effective carrier would be four of the Malone Rack Pads # MPG314, two per crossbar. The foam pads will be less rough on your kayaks whenever you're going down gravel roads....
  view full answer...
• What HD Crossbars Can I Use to Mount an Awning on Rhino-Rack Tracks?
  I have a crossbar solution for you. Unfortunately, Yakima HD Crossbars like the # Y01157 have no way of attaching to Rhino-Rack tracks like the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 50" Long # RRRTV128. However, we do have another option for installing HD bars on Rhino-Rack tracks. For that route, I recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 59" Long # RB1500 along with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack...
  view full answer...
• Use of Rhino-Rack Heavy Duty Crossbars on a 2021 Toyota Sienna with Bare Roof
  While we do have a great roof rack option for your 2021 Toyota Sienna, I confirmed with Rhino-Rack that the Heavy-Duty Crossbars # RB1500 do not fit your naked roof. This is because Rhino-Rack has not engineered legs and a fit kit that works with your bare roof. The absolute best and only option for mounting crossbars on your roof is the SeaSucker Monkey Bars # 298-SX6000B (48" crossbars) or # SEA99FR (60" crossbars). Since the vacuum cups of the roof rack attach directly to your bare...
  view full answer...
• Recommended Rhino-Rack Roof Rack for 2014 Ram 3500 Crew Cab Big Horn
  For a Rhino-Rack roof rack system for your 2014 Ram 3500 Crew Cab Big Horn that has the nicest OEM-like appearance I suggest the Rhino Rack # RR32GR. This rack features quieter matte black aerodynamic crossbars for less wind noise and it has a 165-lb weight capacity on your truck. If it were my truck I'd go for this rack: lower price, nicer looks and same weight capacity. Their heavy-duty rack system that you referenced, made of parts # RB1500, # RRRLKHD and # DK043, offers the same weight...
  view full answer...
• What Crossbars Fit The Rhino-Rack Rain Gutter Roof Rack Legs # RR37XT?
  I have another option for you, but the Rain Gutter Legs # RR37XT you were looking at will not work with the Rhino-Rack SG Roof Rack. You will need to use either Rhino-Rack Heavy-Duty Roof Rack Crossbars like the # RB1500, or the Rhino-Rack Vortex Aero Crossbars like the # RRVA150S-3. I included videos of the products mentioned for you to take a look at.
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 10 Foot Kayak on 2014 Ford F150 Super Crew
  The Rhino Rack # RB1500 Heavy Duty Crossbars, # RRRLKHD 2500 Series Legs and # DK150 vehicle specific clamp kit is indeed compatible with your 2014 Ford F150 Super Crew. For a kayak carrier, I'd recommend the Rhino Rack J-Style folding kayak carrier, part # S512. In order to attach the kayak carrier to the heavy duty crossbars, you'll need an adapter kit, part # KC-FK8. The kayak carrier includes straps to secure the kayak to the crossbars and two bow/stern tie downs. If you click the...
  view full answer...
• Rhino Rack HD Roof Rack that Fits 2013 Ram 3500 Crew Cab
  Yes, the Rhino Rack HD rack fits directly to your 2013 Ram 3500 crew cab with the part numbers # RB1500, # RRRLKHD, and # DK043. This rack uses included clamps to secure by clamping to the door frame of the truck which is very secure and also easy to set up without permanent modification.
  view full answer...
• Is the Rhino Rack Ladder Roller Compatible With the Rhino Rack Euro Crossbars
  There actually is not a load limit for the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars # RR470. Rhino Rack states that you should follow the weight capacity listed in your owner's manual so that'd be 187 lbs while in motion or 771 lbs while stationary. As far as the roller being compatible, that's going to be a no. This roller is listed as a fit for Rhino Rack Heavy Duty crossbars # RB1500 which is a bit wider than the Euro bars so the two aren't going to be compatible.
  view full answer...
• Rhino-Rack HD Roof Rack Fit For 2022 Honda Ridgeline With Naked Roof
  We do indeed have the Rhino-Rack roof rack with HD crossbars that fits your 2022 Honda Ridgeline with a naked roof, and load stops as well. The correct parts for your truck are the following: - Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver # RB1500 or Black # RB1500B-2 - Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD - Custom DK Fit Kit # DK470 This will give you the heavy-duty Rhino-Rack roof rack for your '22 Ridgeline, and then for load stops for these crossbars,...
  view full answer...
• Rhino-Rack Vortex Aero Roof Rack & Ski Rack Compatibility on 2016 Subaru Crosstrek
  The Rhino-Rack Vortex Aero roof rack system made of parts # RRVA118B-2 and # RRSX100 is a complete roof rack system for the 2016 Subaru Crosstrek that has factory-installed roof side rails that run from front to back. You will NOT need to use the Heavy-Duty Crossbar Adapter Kit # HD-FK1 to install their Ski Carrier # RR574 on the Vortex bars. The kit is needed only when installing the ski rack on their heavy-duty bars like # RB1500. Since the Vortex bars have a T-bolt channel in their...
  view full answer...
• Will the Rhino-Rack HD Roof Rack Crossbars Fit My 2021 Honda Civic EX Sedan?
  I have a great alternative solution for you but unfortunately, the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver # RB1500 will not fit your 2021 Honda Civic EX Sedan. However, if you are looking for a heavy duty rack system for your vehicle, I recommend the following setup: - Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine...
  view full answer...
• Aftermarket Roof Racks and Hitches for 2012 Subaru Outback Wagon
  Rhino-Rack's Heavy Duty Crossbars # RB1500 are able to handle at least the same amount of weight as the roof of any car on which they fit. However these bars are not a fit on the 2012 Outback Wagon. We do have aftermarket roof racks for the car that are designed to fit either the version with a totally bare roof or the version with raised side rails that run front-to-back. All appear on the linked page which shows these two roof configurations. Racks vary in their own weight ratings. When...
  view full answer...
• Roof Rack and Surf Board Carrier Recommendation for 2014 Toyota Prius V
  For your 2014 Toyota Prius V the Rhino Rack Vortex Aero Roof Rack part numbers # RRVA126B-2, # RRRLKVA, and # DK195 is a really great option I recommend highly. With this rack you get the quieter aero bar shape, easier install, and higher quality of the nicer racks but at a better price. Then for a surfboard carrier that can carry up to three boards the Inno Board Locker part # INA744 would be a really great option as well.
  view full answer...
• Rhino-Rack Roof Rack Parts for 2017 Ram 2500 Crew Cab
  All Rhino-Rack roof rack setups for your 2017 Ram 2500 Crew Cab are shown on the linked page. You can look these over to see if any of your existing rack components match up so that you can install them on your 2017 Ram. Please note that all Rhino-Rack options for the new truck are the 59-inch length. If you happen to have 59-inch Vortex Aero bars # RRVA150B-2 or # RRVA150S-2 then all you need to mount them on the Ram are the Leg Kit # RRRLKVA and Fit Kit # DK043. If instead you have...
  view full answer...
• How to Install the Rhino-Rack Pioneer Platform Rack on a Truck Cap
  I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part # RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are different. The only way to attach this Pioneer rack to your truck cap would be to remove the crossbars you have now and install a Rhino-Rack Track System which is composed of part # RTC14, part # RLTF (2), and part # RB1375S (2). You would...
  view full answer...
• Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
  view full answer...
• Adding An Awning To A 1995 Toyota Granvia
  Hello Devin, we do have a few options for you. The first thing that comes to mind is to just do a direct mount awning. The Thule HideAway Awning # TH490018 is a great direct mount option. You just need to have 8.5" of open space on the side of the van. If you prefer a roof mounted option, the best bet would be to install roof tracks like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14. You can then use the Track Mount RLTF Legs # RLTF along with some Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Will Track Mount Rhino Rack Legs Fit Tracks On a 20.4 No Boundaries Trailer?
  Yes, since your 20.4 No Boundaries does already have the rail tracks installed you will be able to fit the Track Mount RLTF Legs # RLTF. If you can let me know the distance between the tracks you have installed I can help you with some crossbar options.
  view full answer...
• Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood Bayside
  Can you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Quick Mount Nuts for Rhino Roof Rack Tracks
  According to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
  view full answer...
• Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo Van
  I spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RRRTS546, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
  view full answer...
  
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Aero Crossbars and Roof Rack Parts Needed to Mount a Roof Rack on a Truck Topper or Bed Sides
  I do have a way that you can install aero bars on a truck bed topper or to the side rails of a truck bed but the Whispbar crossbars cannot be mounted this way. Tracks can technically be mounted to just about anything that you are willing to drill into including the bed sides. You could use Rhino-Rack tracks such as # RTC14 which are 55 inches long with legs # RLTF (sold in pairs), and aero crossbars. The crossbars come in various lengths and I have included a link to them for you. The...
  view full answer...
• Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper Shell
  With the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
  view full answer...
• Recommended Ladder Rack and Tonneau Cover Combo for 2020 Jeep Gladiator
  I have a solution for you, but the Track Mount RLTF Legs # RLTF you mentioned are not a fit in Truck Hero rails; additionally those rails are not designed to fit on your 2020 Jeep Gladiator. When it comes to compatible tonneau covers and ladder racks/cargo racks that will work on your 2020 Jeep Gladiator we've only found one combination that will work together. You will need a tonneau cover that mounts completely inside of the bed rails and does not stick up, and a ladder/cargo rack that...
  view full answer...
  
• Roof Rack Recommendation for a 2004 Fleetwood Bayside Pop Up
  The SportRack Pop-Up Camper Roof Rack # SR1020 that you referenced will require drilling into the roof of your vehicle to install. The brackets are designed to sit on the edge of the roof of the camper and get bolted there. Without knowing what tracks you have on your roof or how far apart they are it would be hard to know if there is a roof rack foot that would fit them. If the tracks were like the part # RTS508 that are 1-1/2" wide x 1/2" tall you would be able to use the foot pack #...
  view full answer...
• Weight Capacity Of The Rhino Rack RLTF Roof Rack System.
  If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
  view full answer...
• What Are Rhino-Rack RLTF Legs Made Of
  They are plastic, and according to Rhino-Rack, the Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall # RLTF are made of glass-reinforced nylon. So it is not injection-molded, but glass-reinforced nylon is designed to be extremely stable and durable.
  view full answer...
• Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks
  I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
  view full answer...
• Do I Have the Correct Parts for a Truck Bed Crossbar System on My 2020 Ford F-150 Raptor?
  The - Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14, Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2 # RLTF, and Rhino-Rack Heavy-Duty Roof Rack Crossbar - Black - 71" Long - Qty 1 # RB1800B (x2) are technically compatible parts. However, the Roof Rack Tracks are only designed for you to install with drilling, which will damage your truck rails. Also, it is doubtful whether you will be able to attach a nut on the...
  view full answer...
• Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
  view full answer...
• Rack To Support Rooftop Tent Over A Truck Tonneau Cover
  A great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
  view full answer...
• Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500
  The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
  view full answer...
• How to Install the Rhino-Rack Pioneer Platform Rack on a Truck Cap
  I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part # RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are different. The only way to attach this Pioneer rack to your truck cap would be to remove the crossbars you have now and install a Rhino-Rack Track System which is composed of part # RTC14, part # RLTF (2), and part # RB1375S (2). You would...
  view full answer...
• Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
  view full answer...
• Adding An Awning To A 1995 Toyota Granvia
  Hello Devin, we do have a few options for you. The first thing that comes to mind is to just do a direct mount awning. The Thule HideAway Awning # TH490018 is a great direct mount option. You just need to have 8.5" of open space on the side of the van. If you prefer a roof mounted option, the best bet would be to install roof tracks like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14. You can then use the Track Mount RLTF Legs # RLTF along with some Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Will Track Mount Rhino Rack Legs Fit Tracks On a 20.4 No Boundaries Trailer?
  Yes, since your 20.4 No Boundaries does already have the rail tracks installed you will be able to fit the Track Mount RLTF Legs # RLTF. If you can let me know the distance between the tracks you have installed I can help you with some crossbar options.
  view full answer...
• Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood Bayside
  Can you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Quick Mount Nuts for Rhino Roof Rack Tracks
  According to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
  view full answer...
• Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo Van
  I spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RRRTS546, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
  view full answer...
  
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Aero Crossbars and Roof Rack Parts Needed to Mount a Roof Rack on a Truck Topper or Bed Sides
  I do have a way that you can install aero bars on a truck bed topper or to the side rails of a truck bed but the Whispbar crossbars cannot be mounted this way. Tracks can technically be mounted to just about anything that you are willing to drill into including the bed sides. You could use Rhino-Rack tracks such as # RTC14 which are 55 inches long with legs # RLTF (sold in pairs), and aero crossbars. The crossbars come in various lengths and I have included a link to them for you. The...
  view full answer...
• Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper Shell
  With the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
  view full answer...
• Recommended Ladder Rack and Tonneau Cover Combo for 2020 Jeep Gladiator
  I have a solution for you, but the Track Mount RLTF Legs # RLTF you mentioned are not a fit in Truck Hero rails; additionally those rails are not designed to fit on your 2020 Jeep Gladiator. When it comes to compatible tonneau covers and ladder racks/cargo racks that will work on your 2020 Jeep Gladiator we've only found one combination that will work together. You will need a tonneau cover that mounts completely inside of the bed rails and does not stick up, and a ladder/cargo rack that...
  view full answer...
  
• Roof Rack Recommendation for a 2004 Fleetwood Bayside Pop Up
  The SportRack Pop-Up Camper Roof Rack # SR1020 that you referenced will require drilling into the roof of your vehicle to install. The brackets are designed to sit on the edge of the roof of the camper and get bolted there. Without knowing what tracks you have on your roof or how far apart they are it would be hard to know if there is a roof rack foot that would fit them. If the tracks were like the part # RTS508 that are 1-1/2" wide x 1/2" tall you would be able to use the foot pack #...
  view full answer...
• Weight Capacity Of The Rhino Rack RLTF Roof Rack System.
  If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
  view full answer...
• What Are Rhino-Rack RLTF Legs Made Of
  They are plastic, and according to Rhino-Rack, the Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall # RLTF are made of glass-reinforced nylon. So it is not injection-molded, but glass-reinforced nylon is designed to be extremely stable and durable.
  view full answer...
• Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks
  I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
  view full answer...
• Do I Have the Correct Parts for a Truck Bed Crossbar System on My 2020 Ford F-150 Raptor?
  The - Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14, Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2 # RLTF, and Rhino-Rack Heavy-Duty Roof Rack Crossbar - Black - 71" Long - Qty 1 # RB1800B (x2) are technically compatible parts. However, the Roof Rack Tracks are only designed for you to install with drilling, which will damage your truck rails. Also, it is doubtful whether you will be able to attach a nut on the...
  view full answer...
• Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
  view full answer...
• Rack To Support Rooftop Tent Over A Truck Tonneau Cover
  A great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
  view full answer...
• Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500
  The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
  view full answer...
• How to Install the Rhino-Rack Pioneer Platform Rack on a Truck Cap
  I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part # RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are different. The only way to attach this Pioneer rack to your truck cap would be to remove the crossbars you have now and install a Rhino-Rack Track System which is composed of part # RTC14, part # RLTF (2), and part # RB1375S (2). You would...
  view full answer...
• Parts Needed To Mount A Rhino-Rack Platform To The Roof Of A Ford E-350
  Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 and rivet it to the roof. If needed you can cut the length down from the side without the opening in the channel for accessories to better fit your roof. From there you can then install the Rhino-Rack Quick Mount Legs # RRRLT600 and some spacers blocks # RRQMHD05 to connect the platform directly...
  view full answer...
• Roof Rack For A 2004 Acura TSX
  Hi Manny! We do have a couple options for custom fit roof racks that will fit your 2004 Acura TSX, but Rhino Rack does not have one available, unfortunately. That doesn't mean you are completely out of luck, but you would need to install a Rhino Rack set up a different way. I have the parts needed to do this listed below: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks...
  view full answer...
• Roof Rack For A Leer Shell On A 2004 Toyota Tacoma
  Hi Mark! We definitely have a few options for adding a roof rack to the top of the Leer shell on your 04 Toyota Tacoma. 6 Foot Bed: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long - Qty 2 # RTC18 5 Foot Bed: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 From there you will want the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and the Sportz Aero Crossbar - Aluminum - Black -...
  view full answer...
• Will Rhino-Rack SG Roof Rack for Rain Gutters Support Rooftop Tent
  Hi Jeff; you won't be able to use a rooftop tent with the Rhino-Rack SG Roof Rack for Rain Gutters # RRSG59. This rack, and others like it with the gutter mount, are unable to support the weight of a tents and whoever sleeps inside of them. You will need something like the Rhino-Rack Sportz Roof Rack with Backbone Mounting System # RR72CG which will have the support to handle the static weight of a tent and people. The other option would be to add tracks to the top like # RTC14 (55" long)...
  view full answer...
• Roof Rack for 2007 Lance 861
  Hi Robert; does your Lance 861 have any kind of tracks on the roof already? If not, I recommend the following: - 71" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC18 - 63" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC16 - 55" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC14 You will need to choose the appropriate length for the roof of your camper. Once the tracks are installed you can use the Rhino-Rack Vortex crossbars. Once...
  view full answer...
• Adding An Awning To A 1995 Toyota Granvia
  Hello Devin, we do have a few options for you. The first thing that comes to mind is to just do a direct mount awning. The Thule HideAway Awning # TH490018 is a great direct mount option. You just need to have 8.5" of open space on the side of the van. If you prefer a roof mounted option, the best bet would be to install roof tracks like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14. You can then use the Track Mount RLTF Legs # RLTF along with some Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Roof Rack Set Up For Leer Truck Bed Cap On A 2026 Chevy Colorado ZR2
  Hi David! For the Leer cap you are getting for your 2026 Chevy Colorado ZR2, I recommend the following parts: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14 Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 Rhino-Rack Sportz Aero Crossbar - Aluminum - Black - 71" Long - Qty 2 # RR25AG This will give you plenty of fore and aft movement as well as 71" of crossbar space to work with. You will also have...
  view full answer...
• Adding Rhino-Rack Tracks and Crossbars to 1986 Suzuki Samurai
  Hi Jeff; since you want to modify the tracks and the crossbars I wouldn't get the # Y02-480B. The tracks can be cut down but not the crossbars. Shorter tracks are also available which might save you some work. You can choose from the following based on length: -Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 37-1/2" Long # RTC95JW -Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long # RTC14 -Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long # RTC16 You...
  view full answer...
• Parts Needed To Mount Poineer Platform On An ARE Camper Shell
  Hello Dan. The Rhino Rack RTC-Style Roof Rack Tracks will work great on your ARE Z Series topper. These rails are available in different sizes, so please do measure the roof of your topper to see what kind of room you have. The 55" long tracks, part # RTC14 are one of the most popular options, but you can always go larger if you have room. Once you have your tracks installed you can use the Rhino-Rack Quick Mount Legs # RRRLT600 to mount the pioneer platform such as part # RR92TB
  view full answer...
• Recommended Tracks for Camper Shell Compatible with Prinsu Toprac System
  The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long # RTC14 Rhino-Rack RTC-Style Roof Rack Tracks - 63" Long # RTC16 Rhino-Rack RTC-Style Roof Rack Tracks - 71" Long # RTC18
  view full answer...
  
• Compatibility of Thule Roof Rack Feet on Rhino-Rack Tracks
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 have an inside t-slot dimension of 0.86 inches wide by 0.19 inches tall. I've attached a photo to assist. The Thule tracks are roughly the same size so we know discontinued Thule Tracker II feet will fit these tracks with the track mounting hardware. We also know the podium feet # TH460R will fit when using the fit kit # THKIT3101. If you want to upgrade the bars as well then you can use the Thule ProBar Evo Crossbars - Aluminum - 79"...
  view full answer...
  
• Replacement Channel Nuts For Rhino-Rack RTC Roof Rack Tracks
  Based on the part number you gave me, it looks like you are needing Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 4 # RRQMFK11. These are made to fit the Rhino-Rack RTL600 Legs into Rhino-Rack roof tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 that you were looking at.
  view full answer...
• Will the Rhino Rack Tracks Work with Yakima Control Towers and What Is the Length of Mounting Bolts
  The 63 inch Rhino Rack RTC Style Roof Rack Tracks, # RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I went to our warehouse and pulled a set of the RT Style Rhino Roof Tracks and the Yakima Landing Pad1, #Y00221 to perform a test fit to ensure compatibility. All parts performed just as they should so yes, the Rhino Rack RTC Style Tracks will work...
  view full answer...
  
• Can the Track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells Be Trimmed for a 5' Bed
  The track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells # Y02-490B can be cut down to the size you need. But, the crossbars cannot be cut. That being said, you should not need to trim down the crossbars. It is also important to note that the wider slot on whichever end is trimmed will be gone, so installation and removal of the crossbars would need to be from the untrimmed edge. You could also use the Rhino-Rack Roof Rack for Factory Tracks # Y02-490B-NT (59") with shorter tracks,...
  view full answer...
• Roof Rack Track Setup for Camper Shell for 6-1/2 ft Truck Bed
  To add a set of tracks and crossbars for the roof of your ARE topper we have the Rhino Rack Aero Bar Roof Rack part numbers # Y02-480B which comes with everything needed to install and the tracks are 54 inches long.
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Can Rhino-Rack RTC-Style Roof Rack Tracks Install at an Angle?
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 do need to lay flat. There cannot be an angle because that would cause an undue amount of stress on your camper shell, the tracks, and the legs. To safely and effectively use the rack you are going to need to do it so the tracks are laid down flat or they could very easily snap off or come apart because they'll be constantly flexed.
  view full answer...
• What are the Dimensions of the Rhino-Rack RTC-Style Rack # RTC14?
  I went ahead and confirmed that the dimensions for the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC14 are 2" wide x 1/2" tall x 55" long. If you need the crossbars and legs to mount onto the RTC-Style tracks, I recommend the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 59" # Y02-490B-NT. With this roof rack, you will be able to carry cargo/accessories on your golf cart's roof.
  view full answer...
• Rhino Track Mount Roof Rack for 5' Long Cap on a 2006 Dodge Ram 1500 6-1/2' Bed
  The Rhino-Rack Roof Rack System # Y02-480B is a confirmed fit for your 2006 Dodge Ram 1500 6-1/2' bed as well as the 8' 1500. The reason it fits both is because the track itself can be cut to length for your specific application. You just need to make sure that the cut is perfectly straight so that it is easier to use the track and the caps fit. If you would rather not cut the track you can just make your own kit with the 54" Vortex Aero Crossbars # RRVA137B-2. the Quick Mount Legs # RRRLT600,...
  view full answer...
• Can Rhino-Rack RTC-Style Roof Rack Tracks be Cut to Length
  Yes, you can cut the Rhino-Rack RTC-style tracks to the needed length without voiding the warranty. The RTC-style tracks are available in a number of different lengths: - 71" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC18 - 63" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC16 - 55" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC14 - 31-1/2" Long: Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount # RTC8JW
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Are Yakima Anchor Plates compatible With Rhino-Rack RTC-Style Roof Rack Tracks
  Yes, the Replacement Anchor Plate "A" for Yakima LandingPad 1 (QTY 8), part # Y8810074, will work with the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2, part # RTC14. I have included a product description link below.
  view full answer...

Do you have a question about this Roof Rack?