Rhino-Rack Sportz Roof Rack for Tracks - Aluminum - Black - Qty 2

See what our Experts say about this Rhino Rack Roof Rack

• Rhino-Rack Pioneer Platform Recommendation for Sunseeker Awning on Leer Camper for 2019 Sierra 2500
  I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500. This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions: 43 Sq Ft - # RR32112 48 Sq Ft - # RR31101
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Additional Feet and Crossbar For Rhino-Rack Heavy Duty Roof Rack on 2013 Land Rover LR4
  Hey John! We don't have a variation that comes with three but you can add an additional crossbar and feet to the # RR59QE. You will need the Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 54" Long # RB1375S along with the Track Mount RLTP Legs # RLTP. What do you plan on using the roof rack for?
  view full answer...
• 2008 4 Runner Sport Rhino Rack Roof Rack Options
  Hello Howard. If you're planning on removing your roof rack completely you will need to drill into your roof to install another type of rack. The Rhino-Rack RT Style Roof Tracks # RRRTS502F will give you a lot of options for roof racks once installed. You will need to get the # RLTP Legs and of course the bars of your choosing. You could get the Rhino Rack HD Bars # RB1650B-2 or a Pioneer Platform Rack # RR27AP. These will mount directly to the RLTP feet. If it were me, I would 100%...
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Fitting Larger Rhino Rack Pioneer Platform to Leer Topper with Thule Tracks
  You could use the Rhino Rack Pioneer Platform # RR35TB which is 60 by 49 inch and then for feet that would attach it to your Thule roof rack tracks all you'd need is two sets of the Rhino Rack RLTP Legs part # RLTP and you'd be set.
  view full answer...
• Are Rhino-Rack Adapters or Spacers Required for RLTP Legs to Bolt Onto a Pioneer Platform?
  I reached out to my contact at Rhino-Rack and there are no adapters or spacers required to use the Rhino-Rack Track Mount RLTP Legs for Factory Roof Rack Tracks - 2" Tall - Qty 2 # RLTPMV with the Pioneer platform. They said instead you may want to use a pioneer platform like # RR35TB and legs # RLTP (x2) which would work well with the roof tracks.
  view full answer...
  
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Can Rhino Rack Pioneer Platform Fit on Top of Truck Bed Camper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR75TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Rhino-Rack Pioneer Platform Cargo Carrier For Rails On Truck Topper
  The Quick Mount Leg Spacers for Rhino-Rack Pioneer Platforms - Qty 4 # RRQMPS10-4 are designed to be used with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600. You can then add a pioneer platform like # RR42115BF. If you want to forgo the pieces, the Rhino-Rack Pioneer Platform Rack - Track Mount - 60" Long x 49" Wide # RR35TB along with # RLTP (x 2) to mount the platform directly to the track rails. If your truck topper doesn't...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• How to Use the Rhino-Rack Pioneer Platform Rack on the Roof of a Truck Bed Topper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR35TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Parts Needed to Mount a Rhino Rack Pioneer Platform to a Truck Topper
  I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks.
  view full answer...
• Rhino Rack Roof Rack System for 1992 Chevy Suburban with Naked Roof
  Part # RRRTV208 works for your application. You need part # RLTP and part # RRVA137S-2. This is a universal roof rack system and most people don't like drilling into the roof. Personally I would go with part # 298-SX6000B for your Suburban. This is a universal system and can be used on other vehicles you might have.
  view full answer...
• Correct Rhino Rack RTC Style Track System For A 2016 Chevrolet Silverado 1500
  If you're wanting to put these tracks # RTC16 on your 2016 Chevrolet Silverado, you can get these legs # RLTP that will fit into the tracks. These will work with the Rhino Rack Heavy Duty Crossbars # RB1650B-2.
  view full answer...
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...
• Can I Install Heavy Duty Rhino-Rack Crossbars on a Pop Up Camper Roof
  To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 2 leg options that we...
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Track Mount Roof Rack Will Not Lie Flat on Tonneau Cover
  Is it only happening on the one side? You may need to loosen the connection between the foot and the crossbars to allow the track to lie flat. It may also require another fastener at the very end to hold it down if it refuses to lie flat. You will want to alternate tightening down each side sort of like when you tighten the lug nuts on a tire.
  view full answer...
  
• Rhino-Rack Pioneer Platform Recommendation for Sunseeker Awning on Leer Camper for 2019 Sierra 2500
  I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500. This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions: 43 Sq Ft - # RR32112 48 Sq Ft - # RR31101
  view full answer...
• Rhino-Rack Roof Rack for Truck Cap Track System
  For your truck topper with existing track system, I recommend the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 2 # RLTP along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 65" Long # RB1650B-2. If you prefer the vortex style bars then use Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600 and # RRVA165B-2.
  view full answer...
• Additional Feet and Crossbar For Rhino-Rack Heavy Duty Roof Rack on 2013 Land Rover LR4
  Hey John! We don't have a variation that comes with three but you can add an additional crossbar and feet to the # RR59QE. You will need the Rhino-Rack Heavy-Duty Roof Rack Crossbar - Silver - 54" Long # RB1375S along with the Track Mount RLTP Legs # RLTP. What do you plan on using the roof rack for?
  view full answer...
• 2008 4 Runner Sport Rhino Rack Roof Rack Options
  Hello Howard. If you're planning on removing your roof rack completely you will need to drill into your roof to install another type of rack. The Rhino-Rack RT Style Roof Tracks # RRRTS502F will give you a lot of options for roof racks once installed. You will need to get the # RLTP Legs and of course the bars of your choosing. You could get the Rhino Rack HD Bars # RB1650B-2 or a Pioneer Platform Rack # RR27AP. These will mount directly to the RLTP feet. If it were me, I would 100%...
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Fitting Larger Rhino Rack Pioneer Platform to Leer Topper with Thule Tracks
  You could use the Rhino Rack Pioneer Platform # RR35TB which is 60 by 49 inch and then for feet that would attach it to your Thule roof rack tracks all you'd need is two sets of the Rhino Rack RLTP Legs part # RLTP and you'd be set.
  view full answer...
• Are Rhino-Rack Adapters or Spacers Required for RLTP Legs to Bolt Onto a Pioneer Platform?
  I reached out to my contact at Rhino-Rack and there are no adapters or spacers required to use the Rhino-Rack Track Mount RLTP Legs for Factory Roof Rack Tracks - 2" Tall - Qty 2 # RLTPMV with the Pioneer platform. They said instead you may want to use a pioneer platform like # RR35TB and legs # RLTP (x2) which would work well with the roof tracks.
  view full answer...
  
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Can Rhino Rack Pioneer Platform Fit on Top of Truck Bed Camper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR75TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Rhino-Rack Pioneer Platform Cargo Carrier For Rails On Truck Topper
  The Quick Mount Leg Spacers for Rhino-Rack Pioneer Platforms - Qty 4 # RRQMPS10-4 are designed to be used with the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 # RRRLT600. You can then add a pioneer platform like # RR42115BF. If you want to forgo the pieces, the Rhino-Rack Pioneer Platform Rack - Track Mount - 60" Long x 49" Wide # RR35TB along with # RLTP (x 2) to mount the platform directly to the track rails. If your truck topper doesn't...
  view full answer...
• Recommended Heavy Duty Roof Rack for 2016 Ford F-150
  I may have a solution for you, however I don't recommend trimming the Rhino-Rack RT-Style Roof Rack Tracks like the 58 Inch # RRRTV148 that you referenced. These strips do feature pre-cut holes for the rivets so trimming any portion of the units will essentially change the way they are meant to attach. You would also need to make sure that the cuts are perfectly straight up and down so the end caps will fit properly. We do have shorter lengths available, such as the 36-1/4 inch # RRRTS540,...
  view full answer...
• Are the Rhino-Rack Track Mount RLTP Legs Compatible with Yakima Tracks
  We had the Rhino-Rack Track Mount RLTP Legs, # RLTP, and the Yakima tracks in stock so I pulled them from our warehouse and made a short video for you. I do have a solution for you, however the Rhino-Rack feet are not compatible with the Yakima tracks. Instead, I recommend using the Rhino-Rack RTC Tracks, # RTC14. These tracks are 55 inches long and are compatible with the RLTP legs. They are also more economically priced over the Yakima tracks which will save you some money. I have...
  view full answer...
• How to Use the Rhino-Rack Pioneer Platform Rack on the Roof of a Truck Bed Topper
  There are several different ways to install a Rhino-Rack Pioneer Platform Rack on the roof of your truck bed topper. I recommend using the track system as this will work the best for your application. In order to install the Rhino-Rack Pioneer Platform Rack part # RR35TB you will also need to install a set of tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 and then legs # RLTP (x2). The tracks once installed will give you a very versatile mounting system on the roof...
  view full answer...
• Parts Needed to Mount a Rhino Rack Pioneer Platform to a Truck Topper
  I have a solution for you, but there are not brackets to mount the Rhino Rack Pioneer platforms directly to your truck topper. I recommend adding a track system to the roof of your topper. You will use the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 to provide the tracks and then use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks # RLTP (x2) to mount the platform to the tracks.
  view full answer...
• Rhino Rack Roof Rack System for 1992 Chevy Suburban with Naked Roof
  Part # RRRTV208 works for your application. You need part # RLTP and part # RRVA137S-2. This is a universal roof rack system and most people don't like drilling into the roof. Personally I would go with part # 298-SX6000B for your Suburban. This is a universal system and can be used on other vehicles you might have.
  view full answer...
• Correct Rhino Rack RTC Style Track System For A 2016 Chevrolet Silverado 1500
  If you're wanting to put these tracks # RTC16 on your 2016 Chevrolet Silverado, you can get these legs # RLTP that will fit into the tracks. These will work with the Rhino Rack Heavy Duty Crossbars # RB1650B-2.
  view full answer...
• Will the Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW Fit a 1998 Jeep Wrangler with Hardtop
  The 37-1/2" long Rhino-Rack RTC-Style Roof Rack Tracks # RTC95JW are a universal fit so as long as your 1998 Jeep Wrangler Sahara has a naked roof that is flat then they will fit. The tracks provide mounting points for the Rhino-Rack # RLTP, # RLTF, and # RLT500 track-mounted legs. These are compatible with the Heavy-Duty Rhino-Rack Bars like the 50" long # RB1250.
  view full answer...
• Can I Install Heavy Duty Rhino-Rack Crossbars on a Pop Up Camper Roof
  To be able to mount the Rhino-Rack Heavy-Duty Roof Rack Crossbars, part # RRRB2000S-2, you can use the Rhino-Rack RT-Style Roof Rack Tracks, part # RRRTV128, along with some legs for the crossbars to mount on. The Roof Rack Tracks will allow you to move the legs back and forth along the roof to accommodate what you are needing to carry. If the 50 inch track is too long or short for you I am including a link to our product page that has all of the tracks on it. The 2 leg options that we...
  view full answer...
• Can Low Rider Towers Fit on Truck Cap Tracks for 2007 Chevrolet Silverado
  Yakima's discontinued Low Rider towers hooked onto raised side rails and then clamped onto crossbars. If you already have these towers, they do not fit the Yakima 60" Tracks for Roof Racks # Y01135 as these are horizontal track systems and not raised side rails. If you're looking for tracks for your truck, I can recommend the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 71" Long # RTC18 along with Track Mount RLTP Legs # RLTP and Rhino-Rack Heavy-Duty Roof Rack Crossbars -...
  view full answer...
• Track Mount Roof Rack Will Not Lie Flat on Tonneau Cover
  Is it only happening on the one side? You may need to loosen the connection between the foot and the crossbars to allow the track to lie flat. It may also require another fastener at the very end to hold it down if it refuses to lie flat. You will want to alternate tightening down each side sort of like when you tighten the lug nuts on a tire.
  view full answer...
  
• Roof Rack for 2023 Jeep Wrangler Unlimited With Sky One-Touch Top
  For your 2023 Jeep Wrangler Unlimited we have the Rhino-Rack Vortex Aero roof rack. This has the additional clearance needed to still allow you to use your Sky One-Touch top with the crossbars in place. To complete the roof rack you will need the following: -Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 -Rhino-Rack Roof Rack Legs # RL210S2 (Two of these) -RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 I have attached a review video which shows how your automatic...
  view full answer...
• Can I Fit the Rhino-Rack RTC Tracks # RTC16 on My 2022 Kia Telluride with Naked Roof?
  If you are looking for a permanent solution to mount to your 2022 Kia Telluride, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long # RTC16 is a viable solution. We have had neighbors who report that these tracks do flex to fit the contours of their roofs/camper shells. With that factor, you should be fine with mounting the tracks to your 2-inch channel. Also, since the # RTC16 measures 2 inches wide, they will fit the width. To complete this system, I recommend the following...
  view full answer...
  
• How to Add Rhino-Rack Pioneer Platform to Rhino-Rack Roof Rack on 2022 Jeep Wrangler 4xe
  You can easily add a Rhino-Rack Pioneer Platform to the Rhino-Rack Vortex Aero Crossbars # RRVA150S-2 or # RRVA150B-2 on your Jeep Wrangler 4xe. All you need is the Pioneer that mounts directly to crossbars, which is the following: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The # RR42115BF mounts to your Rhino-Rack crossbars with the included clamps, or directly into the channels of your crossbars with the included channel-mounted hardware.
  view full answer...
• Recommended Roof Rack for 2023 Jeep Wrangler 4xe To Carry Kayaks Above Sky One Touch Soft Top Roof
  For your 2023 Jeep Wrangler 4xe with the Sky One Touch soft top I recommend using the Rhino-Rack Vortex roof rack. For this you will need the Crossbars # RRVA150B-2, Legs # RL210S2 and Adapters # RRVA-FK1-2. I have included an image below on how this rack will look with your particular roof opening. Do understand this image shows their square bars and not the Aero bars I listed above. I recommend using the Thule Hullavator Pro Kayak Roof Rack # TH898 as this allows you to lower the mounts...
  view full answer...
  
• Rhino-Rack Roof Rack Fitment with Sky One Touch Roof on a 2021 Jeep Wrangler Unlimited
  Yes, you can use the Rhino-Rack SG Roof Rack for Rain Gutters # RRSG59 with the Sky One Touch roof on your 2021 Jeep Wrangler Unlimited as long as you don't open up the roof with the roof rack installed. If you wanted an option with enough clearance that you don't have to worry about it making contact with the Sky One Touch then we have that as well with the following parts: 59" Vortex Aero Crossbars - # RRVA150B-2 Gutter Mount Legs - # RL210S2 Fit Kit - # RRVA-FK1-2 Attached are review...
  view full answer...
• Recommended Cargo Box for Roof Rack with 42 Inch Crossbar Spread
  I have a solution for you, but you're not going to be able to use the # TH27PQ to accomplish this. You'll need to find a cargo box that can be used on roof rack systems with a 42" crossbar spread and the only option we have for that is the Yakima SkyBox 21 # Y07337 -which has a maximum allowable crossbar spread of 42" and will mount to round, square, aero, elliptical, and most factory crossbars (maximum dimensions of 3-1/2" x 1-11/16"). The Yakima SkyBox does come equipped with locks for...
  view full answer...
• Recommended Roof Rack for a Hullavator on a 2019 Jeep Wrangler Hard Top
  Yes, there is a Thule roof rack that will accommodate a Thule Hullavator but you will need one with longer crossbars. The Thule Hullavator item # TH898 requires crossbars that extend 4" - 8" past the legs to allow the lift assist function to work. You will need the following parts: Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 item # TH713600 Rapid Gutter Feet for Thule Crossbars - Rain Gutters - 5" Tall - Qty 4 item # TH65BJ This system is compatible with the Thule Hullavator...
  view full answer...
• Recommended Roof Rack for a 2021 Jeep Gladiator Using a Hullavator
  Yes, we do. To carry the Thule Hullavator item # TH898 on your 2021 Jeep Gladiator Sport, I recommend the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 item # RRVA180B-2 RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Track Mount - Qty 4 item # RRVA-FK1-2 Rhino-Rack Roof Rack Legs - Gutter Mount - 4-5/16" Tall - Qty 4 item # RRRL110S5-2 These crossbars are 12" longer than the item # RRVA150B-2...
  view full answer...
• Which Rhino-Rack Roof Rack Will Mount To The Gutters On My 2021 Jeep Wrangler?
  I have a solution for you, but the Rhino Rack Track Mounted Roof Rack 54" # Y02-480B-NT that you were looking into is actually for roof tracks, not roof gutters. Also, the 54" crossbars are not the recommended setup according to Rhino-Rack. For your 2021 Jeep Wrangler you will want to go with Rhino-Rack Vortex Aero Crossbars Black - 59" Long # RRVA150B-2, Adapters # RRVA-FK1-2, and Gutter Mount Legs # RRRL110S5-2. Another option is to go with the flush-mount system: Rhino-Rack SG Roof...
  view full answer...
• Comparing Rhino-Rack Vortex Aero and Heavy-Duty Crossbars for a 2023 Jeer Wrangler
  I recommend using aero style crossbars on a 2023 Jeer Wrangler. The Rhino-Rack Vortex Aero Crossbar System part # RRVA150B-2, part # RRVA-FK1-2, and part # RRRL110S5-2 in particular. The aero style bars are most versatile with rooftop accessories and they will be the quietest. They can also be used for lumber but for this I do also recommend the Load Stops for Rhino-Rack Vortex Aero Crossbars part # RRRLH2. I don't recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars since they don't...
  view full answer...
• Roof Rack for 2022 Jeep Wrangler Unlimited for Roof Top Tent
  All of the roof racks we offer for your 2022 Jeep Wrangler Unlimited with the sky top roof have a 100 lb dynamic (when in use on highway) roof capacity including the Yakima Round Bar Rack # Y00409 and # Y00101 as well as the Rhino Rack roof rack part # RRVA150S-2, # RL210S2, and # RRVA-FK1-2. In general I prefer the Rhino Rack as you get a higher quality roof rack that has aero shaped bars which do better with wind noise as a better price than the similar quality racks that cost a lot more.
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Roof Rack and Cargo Carrier for 2017 Winnebago Travato on Ram ProMaster 3500 Chassis
  Does your 2017 Winnebago Travato on a Ram ProMaster 3500 chassis already have a roof rack? If not Rhino Rack has an option that is a fit for this chassis which consists of Crossbars # RRVA180B-2, RLTP Legs for Factory Fixed Mounting Points # RRRLTPFD and RLTP Leg Adapters # RRVA-FK1-2. If the solar panel on your Winnie is in the middle of the rig and can potentially interfere with installing this roof rack another option to consider is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B...
  view full answer...
• How to Add Awning to 2022 Jeep Wrangler Unlimited With Sky One-Touch Top
  So you can definitely add an awning to your 2022 Jeep Wrangler Unlimited with the Sky One-Touch top, but not with the direct-mount Hideaway; you'd need to add a roof rack and then an awning that attaches to the crossbars of the rack. So first, for the roof rack, here is what you'd need: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA150S-2 or Black # RRVA150B-2 - Rhino-Rack Roof Rack Legs - Gutter Mount # RL210S2 - RLTP Leg Adapters # RRVA-FK1-2 You will still be able to open the...
  view full answer...
• How to Reduce Wind Noise for Rhino-Rack Vortex Roof Rack on 2021 Jeep Wrangler
  I think your issue is twofold; you are using the taller 8-1/4" Tall Legs # RL210S2, and you aren't using the RLTP Leg Adapters # RRVA-FK1-2 (according to what was on your order with us.) The correct parts for the gutter mount roof rack for your 2021 Jeep Wrangler includes the following: 59" Vortex Aero Crossbars - # RRVA150B-2 RLTP Leg Adapters - # RRVA-FK1-2 4-5/16" Tall Gutter Mount Legs - # RRRL110S5-2 Normally I would say you can just add a fiairng to help direct the wind over your...
  view full answer...
• Roof Rack That Fits A 2018 Ram ProMaster 1500
  I took a look at the picture you're referencing and it appears to be similar to the Rhino-Rack RTC-Style Roof Rack Tracks # RTC18 with the RLTP Legs # RRRLTPFD. I do have have a solution, however the roof rack mentioned above with the feet will not fit your ProMaster. If you're still wanting a roof rack, the Rhino Rack Vortex Aero Crossbars # RRVA180B-2, with the legs # RRRLTPFD, and the leg adapters # RRVA-FK1-2 is confirmed to fit your vehicle, and has a maximum weight capacity of 165-lbs.
  view full answer...
  
• Will A Gutter Mounted Rhino-Rack Roof Rack Clear A 2023 Jeep Wrangler Sky Top
  Hi Nathan, The Rhino-Rack Roof Rack Legs # RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up 4-5/16" from the lip of the gutter and see if the sky top sticks up enough to catch where the crossbar would sit. If you haven't had crossbars on any of your vehicles with the roof open then I do want to note that the wind hitting the crossbars is annoying loud...
  view full answer...
• What Is The Weight Capacity Of The Rhino Rack Gutter Mount System On A 2022 Jeep Wrangler Unlimited?
  Installing a Rhino Rack gutter mount roof rack system on your 2022 Jeep Wrangler Unlimited will give you 88 pounds of carrying capacity. The Vortex Aero Crossbars # RRVA150B-2 will give you 59" of usable space as well. To complete this set up, you will need the Rack Legs - Gutter Mount - 4-5/16" Tall # RRRL110S5-2 and RLTP Leg Adapters # RRVA-FK1-2 to attach the bars. Just as a side note, if you have the Sky One-Touch Power Top, we have found that the Gutter Mount - 8-1/4" Tall # RL210DS8...
  view full answer...
• Roof Rack and Kayak Carrier for 2023 Jeep Gladiator to Carry Two Kayaks
  The Rhino Rack kayak carrier part # S512-S512X would be a great option to carry your two kayaks and then for a roof rack that fits your 2023 Jeep Gladiator the Rhino Rack part numbers # RRVA150S-2, # RRVA-FK1-2, # RRRL110S5-2 would work well as it's a higher quality roof rack at a better price.
  view full answer...
• Rhino-Rack Roof Rack for a 2017 Chevrolet Express Van to Mount Solar Panels
  I would not recommend going with the Rhino-Rack Roof Rack Legs # RRRL110S5-2 over the # RRRL150GMC-2. While both are gutter mount options, the # RRRL150GMC-2 have been confirmed to fit and provide the proper roof clearance for adding crossbars to your 2017 Chevrolet Express Van. As for the crossbars themselves, they are an "overhang" style. So if the roof of your van is only 59", then you can use the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 (59" black) or # RRVA150S-2 (59" silver)....
  view full answer...
• Roof Rack for 2023 Jeep Wrangler 4xe with Sky One-Touch Roof
  The Rhino-Rack Vortex Aero Crossbars part # RRVA150B-2 will work great on a 2023 Jeep Wrangler 4xe with Sky One-Touch Roof when combined with the Rhino-Rack Roof Rack Legs part # RL210S2 and RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars part # RRVA-FK1-2. In regards to security, there aren't traditional locks for the mounting feet but they will require a security tool for install and removal which is not something everyone has therefore there is actually built-in security. There...
  view full answer...
• Recommended Roof Rack for a 2024 GMC Savanna Van
  I would be happy to! To add a roof rack to your 2024 GMC Savanna Van you will need the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 item # RRVA165B-2 Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall - Qty 4 item # RRRL150GMC-2 RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Track Mount - Qty 4 item # RRVA-FK1-2 This aero bar roof rack system has a 165 lbs capacity. It has included locks to help prevent theft. The rubberized...
  view full answer...
• Picture and Video of Rhino Rack Roof Rack Installed on 2017 Ford Transit T150
  The Rola roof rack you mentioned is not a fit for your 2017 Ford Transit T150 which means it wouldn't work on your vehicle and we definitely don't have pictures of it installed. The most similar roof rack we have for your 2017 Ford Transit T150 is the Rhino Rack roof rack part numbers # RRVA180S-2, # RRRLTPFC-2, and # RRVA-FK1-2 which we had the chance to install on a similar T150 as yours. I attached an install video as well as an install picture for you to check out as well. When the...
  view full answer...
  
• Rhino-Rack Roof Rack Gutter Mount Fit For 2021 Jeep Wrangler Sky One-Touch Roof
  I checked with Rhino-Rack for you in order to confirm the correct parts you will need for your 2021 Jeep Wrangler with the Sky One-Touch roof, and what you will need are gutter mounts that are 11 inches high. With that height you will be able to utilize your Jeep's Sky One-Touch without interference from the rack. The parts that you will need are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 - RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 - Rhino-Rack...
  view full answer...

Do you have a question about this Roof Rack?