See what our Experts say about this Inno Accessories and Parts

• Will Inno Square Crossbars Fit a Thule 450 Crossroad Roof Rack?
  Yes, they will Aaron! The Inno Square Crossbars item # INB147 will indeed fit the older Thule 450 Crossroad roof rack. They measure 58" long x 7/8" tall x 1-1/4" wide, which is the same size but it doesn't have the track in the bottom like the Thule ones do. What do you use your Thule 450 Crossroad roof rack for?
  view full answer...
• What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?
  Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
  view full answer...
• Crossbars for Home Built Roof Rack Rails on Camper Van
  Hi Mike; the only 58" crossbars we have without a full rack are the round # Y8810023 or the square # INB147. We have 59" aero bars from Rhino-Rack as well # RRVA150B-2. The issue will be finding a way to attach these to your home built rails. We don't have a specific way to attach them so that will be up to you. All of the roof racks are designed to fit vehicle rails or tracks. You may have to install tracks which could be done with the Rhino-Rack Aero Bar Roof Rack # Y02-490B. This comes...
  view full answer...
• Will Inno Ski and Snowboard Roof Rack Fit On Roof Of 2013 Ford Flex Without a Roof Rack?
  I was able to verify with Inno that you will need a roof rack to use the Inno Ski and Snowboard Roof Rack # INTX726 on your 2013 Ford Flex with the bare roof. They do not have a way to install the rack the way you see in the image you found. The Inno Square bar rack consisting of the Crossbars # INB147, Feet # INSUT and Fit Kit # INK263 will allow you to mount their carrier. The mounts for the roof rack are very similar in the way they clamp to the door frames. We do have the SeaSucker...
  view full answer...
  
• Will the Inno Square Crossbars Fit the Thule Tracker II Feet?
  Yes. Since the Inno Square Crossbars # INB147 have the same dimensions as the Thule SquareBar Evo Crossbars # TH712300 (7/8" tall x 1-1/4" wide), the Inno Square Crossbars will fit the Replacement Railing Foot for Thule Tracker II 753-2152..
  view full answer...
• Can Hullavator and J-Style Carrier be Used to Carry Two 40 lb Kayaks on a 2003 Honda Odyssey
  We do have an option for you to use a roof rack to carry your kayaks but I am unsure as to the weight capacity of the roof of your 2003 Honda Odyssey. The Inno roof rack that we carry has a weight capacity of 140 lbs which would allow you to use the Hullavator # TH898 and the Hull-A-Port # TH834, but if your roof itself doesn't have a weight capacity of at least 135 (weight of the kayaks and both carriers combined) then you will be overloading your roof. The Thule roof rack options for...
  view full answer...
• What Inno Square Bars do You Carry over 50 Inches Long for My 2022 Chevy Equinox?
  Yes! We do carry longer Inno Square Crossbars than the # INB127. For longer sizes, here is what we carry: - Inno Square Crossbars - Steel - Black - 58" Long # INB147 - Inno Square Crossbars - Steel - Black - 65" Long # INB165 - Inno Square Crossbars - Steel - Black - 71" Long # IN434 - Inno Square Crossbars - Steel - Black - 79" Long # IN436L It is important to note that Inno recommends the 50" # INB127 maximum crossbar length for your 2022 Chevy Equinox. If you go with longer crossbars,...
  view full answer...
• How to Carry 2 Kayaks with the Darby Extend-A-Truck Kayak Carrier on a 2013 Toyota Tundra
  The foam block that comes with the Darby Extend-A-Truck Kayak Carrier # DTA944-968-924 is really only meant to be used with 1 kayak so if you plan on carrying 2 you need to acquire more blocks with part # MPG158. We do have some tie-downs attached to the load extender down to the safety chain loops to help stabilize the load extender. Please note that this kit is meant to be used for short distances as the roof rack crossbar is very basic and isn't meant for long distance traveling. If...
  view full answer...
• What Crossbars Should be Used with Inno Roof Rack Feet part # INMDK
  You need to use Inno crossbars with the Inno Feet part # INMDK that you referenced. Based on the length you said you wanted you'd want the part # INB147 which is a pair of 58 inch long bars.
  view full answer...
• Fit of the Inno Square Crossbars On A 2020 Chevrolet Traverse
  Yes, the Inno Square Crossbars # INB147 with the Inno Feet for Square Crossbars # INSUT and the Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # IN63FR will work great with your 2020 Chevrolet Traverse LS. These crossbars measure 58" long x 7/8" tall x 1-1/4" wide and has a weight capacity of 220-lbs.
  view full answer...
• Carrying A Previous Generation Thule Hullavator On A 2011 Subaru Forester
  Your least expensive option would be to go with an Inno roof rack. Your older Thule Hullavator was designed to go with either square crossbars or round crossbars. The Inno rack uses square crossbars that are the same dimension as Thule's square crossbars. Your rack will consist of the following; Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127 or Inno Square Crossbars - Steel - Black - 58" Long - Qty 2, part # INB147 and Inno Feet for Square Crossbars - Raised Side...
  view full answer...
  
• Roof Rack Recommendation for 2017 Acura MDX with a Naked Roof
  We do have a roof rack that fits the naked roof on your 2017 Acura MDX, but the SportRack Semi-Custom Roof Rack # SR1008 will not fit. For your application I recommend the Inno Square Bar roof rack system which consists of the following: 58" Long Square Crossbars - # INB147 Inno Feet - # INSUT Custom Fit Kit - # INK656 This will actually fit much better than the SportRack roof rack system and we have an install video of the Inno on a 2016 Acura MDX that you can check out.
  view full answer...
• Weight Limit of Thule Traverse Roof Rack with FitKit # THKIT1520 on 2014 Ram 1500 Crew Cab
  The different components that make up the Thule Traverse roof rack for your 2014 Dodge 1500 crew cab have differing ratings. The load bars # INB147 for example are themselves rated for 165-lbs while the foot pack and fit kit are rated lower, 130-lbs. It can also be that the vehicle has a lower roof weight rating than any of the rack system components. Whenever different parts of a system have different ratings, the lowest-rated one determines the overall capacity. My contact at Thule...
  view full answer...
• Are the Inno Square Crossbars # INB147 and the Malone SteelTop Roof Rack # MPG202 the Same?
  I have an answer for you. Unfortunately, the Inno Square Crossbars # INB147 does not come with the feet (that have the locking mechanism) that are needed to mount the crossbars to your 2018 Honda Odyssey's roof. The Malone SteelTop Roof Rack # MPG202, on the other hand, comes with all the parts needed to mount onto your vehicle's roof. For the feet for the Inno crossbars, that is part # INFR. Other than the feet on the Inno square crossbars, another difference between the roof rack systems...
  view full answer...
• Can 2007 Chevy Suburban w/ Raised Rails Use Inno Square Crossbars Longer Than 54 Inches
  If you'd like you can go with Inno square crossbars that are longer than the 54 inch # INB137 on your 2007 Chevy Suburban with raised side rails. There aren't 60 inch crossbars but you can go with 58 inch long bars to give you some extra space, and here is exactly what you will need: - Inno Square Crossbars - 58" Long # INB147 - Inno Feet for Square Crossbars - Raised Side Rails # INFR This will give you a nice amount of added room to carry cargo on top of your '07 Suburban, and the...
  view full answer...
• How Do I Know Which Roof Rack Accessories Will Work With My Roof Rack On 2012 Scion XB?
  When determining if certain accessories can be mounted to a roof rack system you want to look at a few things. First, if it is a clamp-on accessory then you to make sure it can fit the style of roof rack that you have (square, round, aero etc.). You then want to check the max crossbar dimensions that the accessory can fit and make sure the roof rack is not bigger than that max dimension; these dimensions are typically listed on the product page of roof racks and any roof rack-mounted accessories....
  view full answer...
  
• Recommended Roof Rack for a 2007 Toyota Sienna Using a Thule Hullavator
  I would be happy to! There are two different types of rails to mount a roof rack you could have on the roof of your 2007 Toyota Sienna so I will make recommendations for both. The Thule Hullavator item # TH898 also requires an extra 4" - 8" past the mounting legs for the lift assist function to operate without hitting the side of your van. I have listed the two options below that would be the best choice and included the longer crossbars: With Raised Rails Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Will the Thule Stacker Work with the Inno Square Crossbars
  Yes, the Inno Square Crossbar System part # INB147, part # INSUT, and part # INK263 which is a fit for your 2011 Ford Flex will work with the Thule Stacker part # TH830. This option will allow you to carry multiple kayaks on the roof of your vehicle. The roof racks comes with locks for security and the carrier comes with tie-downs. I have attached a review video on each of these items for you. Please note that the weight of the roof rack, stacker, and water sport accessories will need...
  view full answer...
• Roof Rack Fit for 2013 Toyota Tundra CrewMax
  We do have a reasonably-priced roof rack option for your 2013 Tundra CrewMax, but none of the SportRack roof racks like the # SR1002 you mentioned would be compatible. Inno offers a roof rack that would be assembled from the following parts: 58 Inch Square Crossbars, part # INB147 Roof Rack Feet, part # INSUT Vehicle Specific Clamp Kit, part # INK742
  view full answer...
• Inno Roof Rack Recommendation for 2007 Subaru Forester
  For your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers # INB117, # INTR, # INTR104 that INNO recommends as a fit. The bars that come with this, # INB117 are 46 inches long. If you wanted the longer 58 inch bars you'd need the part # INB147.
  view full answer...
• How To Carry Bike and Cargo Box On 2012 Acura MDX with Bare Roof
  The Inno Square Crossbar System part # INB147, part # INSUT, and part # INK590 is an excellent cost effective option for a 2012 Acura MDX and it even comes with locks for security. It can then be used for a bike rack like the Inno Tire Hold II Roof Bike Rack part # INA389 and a cargo box like the SportRack Vista XL Cargo Box part # SR7095. The two should fit together width wise no problem and because the cargo box has a higher profile rather than longer length it should clear the hatch...
  view full answer...
• What Crossbars and Fly Rod Carrier do You Recommend for My 2019 Chevy Traverse?
  When looking to mount a CRC fishing rod system to the Malone AirFlow2 Crossbars # MPG216 on your 2019 Chevy Traverse, it really depends on the mounting clamps on your CRC system. If you already own a CRC system, I recommend measuring the width and depth of your clamps to make sure they can wrap around the 3" wide x 1" tall crossbars of the Malone AirFlow2. With that being said, the AirFlow2 crossbars will work great with a compatible CRC setup on your vehicle. It is important to note, though,...
  view full answer...
• Roof Rack for 2017 MDX with Naked Roof for Carrying 2 Kayaks
  I would go with an aftermarket roof rack for your 2017 Acura MDX as it's going to cost considerably less and be just as good if not better. For the money and the quality the Rhino Rack # RRVA137B-2, # RRRLKVA, and # DK400 is the best option. It gives you an aero bar roof rack that's very high quality at a price that beats the higher end rack manufacturers. The INNO kayak carrier part # INA450 then would be a great choice as it can carry up to 2 kayaks like what you need.
  view full answer...
• Will Inno Feet for Rain Gutters Work With Side Loader Mounting Brackets
  The Side Loader Mounting Brackets part # Y08002 are simply bolt-on artificial rail gutters so they should work just fine with the Inno Feet for Square Crossbars part # INLD. The Inno Square Crossbars part # INB147 would then be compatible with the Inno Feet for Square Crossbars.
  view full answer...

Do you have a question about this Accessories and Part?