Stainless steel RV kitchen faucet has a maintenance-free ceramic disc cartridge that prevents the faucet from dripping. Standard-flow aerator provides the water pressure you need to wash your dishes faster and more thoroughly.
Features:
Specs:
This faucet lets you upgrade the kitchen faucet in your RV or camper. Depending on your setup, this faucet can have either a 1-hole installation using the built-in round deck plate or a 3-hole installation using the included oval deck plate. Mounting hardware is also included. Using the inlet shank, drop the new faucet and deck plate in place of your existing faucet. Then thread the mounting nut onto the shank. Finally, connect the braided hot and cold water lines. The use of tub and tile caulk (not included) is required.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey, everybody. Welcome to etrailer.com. I'm Bobby, and today we're taking a look at the empire faucet stainless steel RV kitchen faucet with gooseneck spout and single lever system. Now this faucet's gonna go ahead and allow us to replace our older faucet, an RV, without too much trouble with installation. It is made of a stainless steel, so you know we don't have to worry about corrosion. It also utilizes a diamond ceramic disc cartridge, mixing our water in the cylinder, and reducing the need for maintenance overall.
And that also is what allows us to have our single lever design here. The gooseneck spout gives us 360 degrees of revolution, which is plenty of room to turn for whichever side of the sink we need to use. And the head of our faucet also has this optional Insta-spray aerator, as you guys can see attached right now. This allows us to quickly change between spray and stream flow with the use of one hand, which can be great if you're washing a dish and you can't quite get it unstuck, can quickly change that for ourselves with no time at all. Now then, this is gonna give us a flow rate of 2.2 gallons per minute.
We should have no trouble getting ample water pressure for ourselves. Then of course, you guys can take that off, just to get your standard faucet look and feel. However, I think that that guy definitely is gonna be nice for us, just go ahead and quickly change however we need it to be for ourselves. You are seeing too, here at the bottom, that we do have those nice little inlets for our water connections here. Those are also already made of stainless steel and have that half-inch fitting, to allow us to quickly thread on our existing water supply.
But let's go ahead and start breaking down some of the dimensions here. With our lever fully extended, we can go ahead and get that first measurement. Now why we're doing that is we don't actually have to utilize this optional plate down here at the bottom. Of course, it can go ahead and cover up your three holes that might've been there previously, or if you just want that nice decorative look, you can go ahead and give ourselves that nice feel, but we can just utilize this inner assembly if need be. Well, taking a count with our little ledge right here to the very end of our lever.
Let's go ahead and see that overall width to the very end of our lever is putting us at four and three-quarters of an inch. Our plate width, from here to here, is gonna be putting us right at nine and three-quarters of an inch, while the depth of our plate sits at just two and three-eighths of an inch, right there to the end. Now that height of that plate, or that thickness, is gonna put you at three-eighths of an inch for that plate, while our overall height is gonna be putting us right at 15 inches to the very top of our spout here, for that overall height. Now that spout length from center, with our aerator poking out as far as we can away from it, just to give us an idea of our maximum, from the center of our assembly here to the very end of our nozzle, making sure I'm lined up here guys, is gonna be putting us right at nine inches for ourselves, maybe just a hair underneath that nine inches. So, definitely not gonna be taking up too much room and hopefully it should be fitting within perfectly for our sinks. Well guys, if you are liking this look as well though, but not quite the color, this does come in a multitude of colors. Right now, we do have it in the matte black here today, but we do also have brushed nickel and also chrome available for you guys. So if you're not quite liking that color, we can go ahead and change that out. And if you're just not quite liking this design, I highly recommend taking a look at some of the other empire faucets at etrailer.com; definitely can fit the one that fits your interior the best. Well guys, I think that's gonna do it for our look at the empire faucet stainless steel RV kitchen faucet with gooseneck spout, here at etrailer.com. I'm Bobby. Thank you for watching..
Average Customer Rating: 3.5 out of 5 stars (2 Customer Reviews)
Stainless steel RV kitchen faucet has a maintenance-free ceramic disc cartridge that prevents the faucet from dripping. Standard-flow aerator provides the water pressure you need to wash your dishes faster and more thoroughly.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.