bing tracking image
  1. Accessories and Parts
  2. Thule
  3. Watersport Carriers
  4. Roof Mount Carrier Parts
  5. Knobs
Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers
Thule

Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers

Part Number: 753-0783
In Stock
$11.79
Accessories and Parts
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Used primarily with Thule roof-mounted carriers, this 3-wing knob fits over the threaded end of an M6 carriage bolt to help secure the rack to your load bars. Replacement hand knob twists on. 1-800-940-8924 to order Thule accessories and parts part number 753-0783 or order online at etrailer.com. Free expert support on all Thule products. Great prices and Fastest Shipping for Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (326)
  • Q & A (0)
  • Videos (2)
  • Photos

Thule Accessories and Parts - 753-0783

  • Watersport Carriers
  • Roof Mount Carrier Parts
  • Knobs
  • Thule

Used primarily with Thule roof-mounted carriers, this 3-wing knob fits over the threaded end of an M6 carriage bolt to help secure the rack to your load bars. Replacement hand knob twists on.


Features:

  • Replaces 1 lost or damaged 3-wing knob for Thule roof-mounted carriers
    • Watersport carriers: Thule's Stacker rooftop kayak mounting system (TH830), Thule Hang Two Surf Carriers (TH554), Thule Hydro Glide rooftop kayak saddles (TH875XT), Thule Hullavator rooftop kayak carrier system (TH897XT), Thule Hull-A-Port PRO kayak carriers (TH835PRO)
    • Bike carriers: Thule Sidearm wheel-mount bike carrier (TH594XT), Thule Wheel-On roof-mounted bike-wheel carrier (TH593)
  • Fits over threaded end of an M6 carriage bolt (sold separately)
  • Helps to secure carrier to your roof-rack load bars
  • Twists on for installation


753-0783B Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers

Replaces Thule 7530783




California residents: click here


Video of Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Comprehensive Review: Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers

Hi everyone. It's Evangeline here at Etrailer. And today we'll be taking a look at our replacement part, which is the Thule M6 low hand knob for your Thule roof mounted carriers here at Etrailer. So this is a direct replacement knob for your Thule roof mounted carriers. And like what we have here is we have a kayak carrier, which is the Thule stacker, and you can see how we're using a knob for both the carrier itself, as well as the clamps used to clamp down the carrier. So if one of them gets lost, damaged, or is broken, this is what you would get to replace them.

This fits right onto your M6 carriage bolt, kind of like what we have right here. So if you don't have an M6 carriage bolt, this will not thread onto it and make sure that's what you're using to clamp down your roof mounted carriers. All you need to do is just pin it around the bolt. And that's pretty much all there is to installing this replacement knob. Now the thing about this wing nut is that the thread is kind of deep on the inside.

There is some space that you have to clear before it threads onto your bolt. So just to make sure that if you're using this to replace something lost, and you're not sure which bolt you need, or which replacement part you need, make sure you have enough thread on that bolt for this to fit onto. So from my experience of working with Thule roof mounted carriers is I definitely recommend picking up a couple of these as you get your accessory, just because it is really easy to lose these nuts because of once you do release them, I've dropped them several times onto our floor or on the roof of a vehicle. So just because of that, this is a great piece to have around as a replacement part for if you do lose, break or damage, your current knob that is on your roof mounted accessory. Again, this is designed for Thule roof mounted accessories.

This may or may not fit whatever other accessory you have, but as long as it has an M6 pattern on that fault, it probably will fit. And that was a look at our Thule replacement hand knob for your Thule roof mounted carriers. Again, this is the M6 low hand knob and you can find them here at Etrailer..

Customer Satisfaction Score:

Ratings & Reviews

4.8

326 reviews
Used primarily with Thule roof-mounted carriers, this 3-wing knob fits over the threaded end of an M6 carriage bolt to help secure the rack to your load bars. Replacement hand knob twists on.

by:

Was exactly what I was looking for.



by:

The product was delivered very fast and in a timely manner.. I WILL definitely be back if I ever need replacement parts...
Thank you very much..



by:

Excellent service! etrailer.com promptly received and shipped my order. I was surprised to received it the day following a holiday.



by:

Functionally equivalent to traditional wing-nuts.
Easier to use than traditional wing-nuts. No need to use a wrench. Downside is that these are substantially more expensive than traditional wind-nuts.



by:

Great replacement part. Just make sure you research the size to make sure it will fit!



by:

This is just what the part I needed for my kayak! The process was easy and I received an e-mail from etrailer as soon as it was shipped and they followed up on delivery. We don't get this kind of customer service any more!!! I will be kayaking soon - thanks etrailer. I will definitely use etrailer for all parts I need for hauling bikes and kayaks.



by:

Ordered some Thule replacement parts (thumb nuts and carriage bolts), the standard parts for Thule bike holders. Arrived quickly and exactly as described. Much easier than running to a bike store to see what they have in stock and if they have the pieces in stock.



by:

Wonderful customer service and timely delivery!
Somehow, the side tensioning knobs on my Thule Stacker 830 came off while driving. I searched for replacement knobs and found etrailer.com (your SEO is stellar). They had exactly what I needed and so I ordered a couple extra. It was an easy ordering process, timely delivery and great follow-up to ensure I was satisfied with the product and service. They will be my FIRST stop for all of my camping/hauling needs in the future!



by:

I was so excited to find this replacement knob to my circa 2004 rooftop Thule kayak rack.
Thank you!



by:

Great company. My order was processed and shipped immediately. I could even go online and not just see my order being assembled and processed, but they even provided the name and a picture of the employee performing that part of the job—very good experience.



by:

They work great but were a bit pricey. Overall I am Satisfied with the purchase and they arrived quickly.



by:

Fits perfect

Michael profile picture

Michael

6/27/2025

Very well



by:

Great product thanks



by:

Worked as expected. Perfect fit for the Thule surf rack



by:

Solid products with fast and dependable customer service.



by:

Always a pleasure dealing with etrailer



by:

This is an exact OM replacement part that was easy to find on etrailer.com. Although it is a part that needs to be replaced every few years it is hard to locate even on the Thule site. Price and shipping were good and the parts (I ordered extras) arrived as promised. I will definitely recommend this company and will return for rack or trailer parts.

John H. profile picture

John H.

8/19/2015

Perfectly



by:

I lost one of the knobs for my older model Thule J-racks. This replacement knob is perfect. Thanks.



by:

replaced cracked plastic hand knobs on my Thule 878 Set-to Go saddle on my Thule roof rack for hauling kayak.



by:

Perfect replacement parts to repair the deflector on my Thule carrier rack.

Tr675 profile picture

Tr675

8/14/2023

Fine - no issues. When I installed the wing knobs I added a little glue glob to keep from losing them on the road again I originally lost them as a result of vibration and wind -they loosened up



by:

I needed to replace knobs I lost on the Thule883 kayak carrier. These are exactly the same as the original knobs.

Jamie O. profile picture

Jamie O.

8/12/2017

I would order these again if I need replacements in the future



by:

Lost a knob on my Thule kayak rack - left racks on too long without checking tightness - my bad. Hunted for replacement and some spares. Googled around a bit and landed here - useful description and good price. Knobs fit like OEM equipment (which they well may be) and have served well over the past year. All good, zero complaints. Just a remineder, if you are going to keep your rack on all summer, tighten your knobs once a week!



by:

Thanks for the fast shipping. It was great to find parts for my vehicle for using my Thule products for my Kayak. Great Store for Thule products.



by:

Always very helpful and responsive



by:

As usual, lighting fast order processing and shipping (and Great pricing). Always a pleasure to do business with.

Lauri L. profile picture

Lauri L.

10/7/2021

This carrier is great. I have my power cords, camp chairs , and sunshades up there. Not a leak, even through this terribly wet summer we had.

Lauri L. profile picture

Lauri L.

10/7/2021

Still works great...


25
326
Show More Reviews

See what our Experts say about this Thule Accessories and Parts

  • Will A Thule Big Mouth Fit My Factory Crossbars Without A T-Channel Or Do I Need A New Bike Rack
    The Thule Big Mouth was able to mount to Thule Aero Bars with the xadapt2. That was a t-channel mounting system. I spoke with a Thule rep and she said there was never a mount for aero/factory rack bars that did not have a t-channel. I remember when we wanted to install a Big Mouth to a factory roof rack we had to use the Thule Ride-On Adapter. That was a mini Thule roof rack that added square bars on top of your factory crossbars. So there is not a fix for your situation outside of putting...
    view full answer...
    Image 1 for
  • Adapter Needed for Thule J-Style Kayak Carrier on Rola Roof Rack System for 2012 VW GTI
    If the bolts on your Thule J-Style kayak carriers aren't long enough then you most likely need the adapter kit # THXADAPT11 which is required when installing the Thule Hull-A-Port # TH834 on the Thule AeroBlade crossbars. Since the crossbars on your Rola Sport Series Roof Rack with GTX Mounting System 59736 has a similar shape, you should be able to use the adapter just fine. If you have other J-Style racks that we carry just let me know what they are and I can see if we have similar adapters...
    view full answer...
  • Replacement Hardware for Thule Canyon XT Wind Fairing
    To attach the Fairing # TH83FR to your Thule Canyon XT # TH859XT you're going to need the following: Replacement Carriage Bolt - # TH47CE Fairing Washer - # TH73FR Fairing Clamp - # 1500052562 3-Wing, Low M6 Hand Knob - # 753-0783
    view full answer...
  • Replacement 3-Wing, Low M6 Hand Knob for Thule Canyon XT Roof Cargo Basket
    We have exactly what you need, that is the Replacement 3-Wing, Low M6 Hand Knob for Thule Roof Mounted Carriers, # 753-0783. And FYI, in case needed in the future, we also have the Replacement Hardware Bag #2 for Thule Canyon XT Roof Cargo Basket, # 7521807001. This has multiple replacement parts in a kit.
    view full answer...
  • What Are the Dimensions of Thule Replacement U-Bolt, # TH02943
    I went out to the warehouse and measured a Replacement U-Bolt, # TH02943. The center to center distance between each end of the u-bolt is 4 inches. It is 2 inches deep in the center. The cross bars on your Volvo XC90 would have to be smaller than those dimensions in order for these u-bolts to fit. The Car-Go cargo box is not made anymore so I cannot test this u-bolt with the knobs it used. But I can tell you that this u-bolt uses an M6 (6mm) knob like # 753-0783.
    view full answer...
  • Replacement Hardware To Attach Wind Fairing on Thule Canyon XT Roof Cargo Basket
    In order to attach the wind faring to the Thule Canyon XT Roof Cargo Basket part # TH859XT you will need the Replacement Fairing Clamp part # 1500052562 (Qty. 5), the Replacement M6 x 22 Carriage Bolt part # 915-0622-54 (Qty. 5), and the Replacement 3-Wing Hand Knob part # 753-0783 (Qty. 5). Please note, you will also need 1/4" Flat Washer (Qty. 5) which can be obtained at any local hardware store.
    view full answer...
  • Longest T Track Bolt and Wing Nut That Is Compatible With The WingBar Evo
    The M6 x 55mm T Bolt for Thule # 1500052620 is the longest bolt that we will have for your WingBar Evo # TH711520. The Replacement 3-Wing, Low M6 Hand Knob # 753-0783 is compatible with the T Bolt.
    view full answer...
  • Thule Replacement Parts for Securing Tram TH9033 Ski Rack To Bike Rack Upright
    The three parts you are looking for are the metal bracket # 853-5513, cap screw # 919611054, and replacement wing nut # 753-0783. These are the three parts that attach the portion of the Tram # TH9033 that you pointed out in your picture to the upright of the bike rack.
    view full answer...
    Image 1 for
  • Will the Rocky Mounts DriveShaft fit on the Saris Fork-Block
    I have a great solution for you but unfortunately the RockyMounts DriveShaft Track Truck Bed Bike Rack part # RKY1086 will not work with the Saris Traps Fork-Block 3 Bike Rack part # SATRK34-BLK3 . The DriveShaft is designed for track systems in truck beds and has an area that extends past the connecting edge of it and it would not sit flush or flat on the Traps. Instead I like the RockyMounts DriveShaft HM Truck Bed Bike Carrier - Thru-Axle Mount part # RKY1084. This will give you all...
    view full answer...
  • Replacement 3-Wing Knobs for Thule Sidearm Roof Bike Carrier
    Thule Replacement Knob part # 753-0745 is the correct knob for the Sidearm rack's ratcheting arm. It fits both versions of this rack. For the knob that secures the carrier to the roof rack crossbar use M6 part # 753-0783.
    view full answer...
  • Thule Sidearm Parts for Compatibility with Subaru Factory Roof Rack
    For your 2010 Subaru factory crossbar, you can upgrade your Sidearm Mounting hardware to fit that rear rail. The front rail should work with the current hardware, but the upgraded hardware should work with both bars if that is what you are mentioning. Unfortunately even the newer model of the Sidearm you are referring to is discontinued so the other parts are not available. If the rear hardware works for the front even though it is long, it may be the best option. You will need two...
    view full answer...
    Image 1 for
  • Replacement Parts to Mount Thule Tram to Thule Spare Me 963Pro
    So I checked, and it is possible to get some of the parts you specified, while others are not due to them having been discontinued or not available as a spare part. The bolt from "1", the 45mm carriage bolts from "2" and the spacers from "3" are not offered. That said, here is what we can get you if you'd like: - Replacement Washer # 951081654 - Replacement 3-Wing, Low M6 Hand Knob # 753-0783
    view full answer...
  • Replacement Mounting Hardware for Thule Hull-a-Port Kayak Carrier
    I understand your concern about your Thule Hull-A-Port Kayak Carrier # TH834 coming loose from your vehicle roof rack crossbars but I cannot recommend using any alternate hardware (such as that from another Thule carrier). What I suggest you do is apply a thread lock compound like Loctite # LT37643 to the hardware's threads. This should prevent the knobs from coming loose on their own but still allow you to remove the carrier if you wish. If you still have an issue then I suggest using...
    view full answer...
  • What is the Thread Pattern and Size of Replacement Square Head Bolt for Thule Fairings
    Yes, the threads on the Replacement Square Head Bolt for Thule Fairings, # 853-208909, is an M6 bolt. I pulled the bolt and another M6 item, wing nut # 753-0783, and tested them together. The bolt threaded in the nut correctly so it is an M6 bolt. I cannot guarantee that the bolt will work with anything other than a Thule product. The bolt head is about 3/4 inches square and the head is 1/8 inch thick. Overall, the length of the bolt is about 1-1/8 inches.
    view full answer...
  • How To Use Yakima HullyRollers On Thule Aero Crossbars
    I do have an option for you to use the Yakima HullyRollers 8004015 on a Thule WingBar Evo Crossbar like part # TH711420 but there isn't any option to mount them within the channels. The only mounting option available for the HullyRollers are wraparound clamps. The correct wraparound clamps for aero crossbars are the Universal MightyMounts for Yakima Roof Mounted Accessories part # Y03590. The Replacement 3-Wing, Low M6 Hand Knob part # 753-0783 is made of plastic and there is no metal...
    view full answer...
  • Replacement Wing Nut for Staionary Roof Kayak Cradles
    If you have a Thule watersport carrier like the Thule DockGlide Kayak Carrier # TH896 and you are looking for replacement wingnut for the clamp part, then the Thule M6 knob # 753-0783 is a fit. If your saddles have a larger M8 bolt then the replacement part # 753-0776 is the one for you. If you can tell me what kayak saddles you have exactly, I help you get the correct wing nuts if they're available.
    view full answer...
  • Availability Of Replacement Bracket, Knob, and Carriage Bolt For Thule Slipstream Kayak Carrier 887X
    We have exactly what you need. You are looking for replacement metal bracket # 853-5513, replacement knob # 753-0783, and carriage bolt # 915-0650-54. All of these parts are correct for the Thule Slipstream Kayak Carrier 887XT you mentioned. I included a few video reviews of the products mentioned for you to take a look at.
    view full answer...
  • What are the Dimensions of Replacement 3-Wing, Low M6 Hand Knob 753-0783
    I went out to the warehouse to measure Thule replacement 3-wing knob, # 753-0783. At its widest point it is 1.34 inches and from the end of one wing to the space in between the other 2 wings it is 1.10 inches. And it is 0.70 inches tall.
    view full answer...
    Image 1 for
  • Will Yakima Aero Crossbar SmarT-Slot Kit Bolts # Y03098 Fit Thule M6 Wing Nut
    I actually went out to our warehouse to test a bolt from the Yakima Aero Crossbar SmarT-Slot Kit # Y03098 with an M6 wing nut from Thule (part # 753-0783). The Yakima bolt threaded into the nut perfectly which means it is indeed an M6 bolt. They will work just fine with a Thule M6 wing nut like what you have.
    view full answer...
  • Parts Needed To Install Thule Canyon XT Roof Cargo Basket With Fairing
    The Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs # TH859XT comes with everything necessary for installation onto a roof rack; the wind fairing and associated hardware is also included in purchase. This cargo basket is made to fit onto many different styles of crossbars such as round bars, square bars, aero bars, and most OEM factory crossbars. If your 2021 Toyota Highlander has the factory crossbars running left to right across your roof then you are all set to install...
    view full answer...
  • Compatibility For Thule Hull-A-Port 835PRO and Thule WingBar EVO Cross Bars on a 2023 Ridgeline
    I reached out to Thule for clarification on the compatibility of the parts you have. They explained that the Thule WingBar Evo # TH711500 with the Evo Clamp Feet # TH710501 and Fit Kit # TH79RV you installed on your 2023 Honda Ridgeline are not compatible with the Adapter # THXADAPT11 you have on your Hull-A-Port 835PRO. That adapter was only compatible with the AeroBlade roof bars. You will instead need to use the 80mm Bolts # 915-068-054 which came with your 835PRO along with the cradle...
    view full answer...
  • Which Bolt is Compatible with the Thule 3 Wing Knob # 753-0745
    The threads on the Replacement Square Head Bolt for Thule Fairings, # 853-208909, are an M6 bolt. I pulled the bolt and another M6 item, wing nut # 753-0783, and tested them together. The bolt threaded in the nut correctly so it is an M6 bolt and knob. Knob # 753-0745, also accepts an M6 bolt. I cannot guarantee that the bolt will work with anything other than a Thule product. The bolt head is about 3/4 inches square and the head is 1/8 inch thick. Overall, the length of the bolt is about...
    view full answer...
  • Replacement Hardware & Strap For Thule Hull-A-Port 834 Kayak Carrier
    We do have replacement straps and hardware for your Thule Hull-A-Port Kayak Carrier # TH834. I'm not sure what hardware you are referencing specifically, so I'll just go ahead and list out the replacement hardware and you can choose precisely what you need: - Replacement Tie-Down Strap # TH39YY - Replacement Rope # 853-5466 - Replacement Metal Bracket # 853-5513 - Replacement 3-Wing, Low M6 Hand Knob # 753-0783 - (For crossbars up to 9/16" tall) Replacement M6 x 50 Carriage Bolt #...
    view full answer...
  • Parts Needed For Mounting Thule Hull-A-Port Kayak Carrier 835 To Vehicle Crossbars
    To mount the Thule Hull A Port 835 you will need the following components. You already have the Base Pad # TH96JV on your carrier from the image. You will need 4 of the Replacement M6 x 50 Carriage Bolt # 915-0650-54. The original kit came with 4 of each these and a larger size for different thickness and shape crossbars. These will hold the Metal Bracket # 853-5837 in place and the Replacement 3-Wing, Low M6 Hand Knob # 753-0783 will tighten up on the quick release side of the bracket....
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Tyler C
Written by:
Tyler C
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Installed by:
Kathleen M
Employee Evangeline M
Installed by:
Evangeline M
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Manda E
Updated by:
Manda E
Employee John S
Video by:
John S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<