Replace a worn gear and restore smooth room travel on Lippert through frame slide outs. Fits 2" x 2", 2-1/2" x 2-1/2", 2" x 3", and 3" x 3" systems and slide packs 123356, 281331, and 122837.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer. Let's take a quick look at this replacement 15 tooth spur gear for your Lippert Through Frame Slide-Out. Now this is a direct replacement 15 tooth spur gear designed for your Lippert Through Frame Slide-Out system. So if your RV slide-out is starting to move rough, get out of sink or make noise, this is one of the key components that can wear out and replacing it's going to help restore that smooth, even movement when the slide goes in and out. Now this is built to fit a wide range of common Lippert systems, including both hydraulic and electric setups.
And this is going to work with multiple frame sizes like the two inch by two inch, the two and a half inch by two and a half inch, the two by three and the three by three. So it's pretty versatile if you're trying to match an existing setup. It also matches up with several Lippert slide pack assemblies and you can cross reference it with the Lippert part number 101941 that you see there at the bottom. Now in the middle of that graphic, you can see that this does also match slide pack assemblies identified by those numbers that you see there as well. So got quite a bit of information there for you on your screen.
I just want to make sure that you confirm that this is the one that you indeed are going to need. The gear itself is made from copper infiltrated metal, which is important because that gives it extra strength and it's going to help it resist wear over time. So this is not just a quick fix, it is indeed meant to last. But overall, this is going to be a straightforward replacement part that's going to help bring your slide-out system back to smooth, reliable operation, all without needing to replace the entire mechanism. Now, if you have any, if you want any help rather with installation on this product page, underneath the photo section, we have a link that will take you to our installer locator.
If you click that link and answer the questions that it has for you, that locator will find an installer that etrailer has partnered with to do the installation for you. But if you happen to have any other questions, don't hesitate to reach out. We do want to make sure that you're getting exactly what you need. Again, my name's Andy. Thank you for joining me.
.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.