Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the roller fairlead for your Bulldog Winch ATV/UTV winch. 4 Rollers reduce friction and wear on your wire rope. Steel construction with zinc-plated rollers and black powder coated frame resists corrosion. 4,000 lbs.
Features:
Note: The roller fairlead does not mount directly to the winch - it typically attaches to tabs on the winch mounting plate (sold separately). Most aftermarket mounts include these tabs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look a part number BDW20059. This is the bulldog winch roller fairlead for Powersport Applications. This is going to be your standard four roller fairlead. This unit's going to allow the cable from your winch to come through this slot right here. It's going to allow the cable to move in and out and side to side very smoothly. The roller is going to reduce wear and strain on the cable which ultimately extends the life of your cable.
You can see how each roller spins freely, nice and smooth operation, which again, is going to extend the life of your cable reducing the wear and strain on the cable itself. These rollers are made from a steel construction, they're going to be zinc plated for protection from rust and corrosion. The frame of this unit is actually made from a steel construction and it's going to be a black powder coat finish. That's also going to do a good job when it comes to resisting rust and corrosion. You see back here, it's going to have the two mount holes. If we take a measurement center on center, the distance between the two mount holes ...
that's going to give us a measurement of right at six and a half inches. These holes are going to have a diameter of three-eights of an inch. All the rollers are going to have the hardware installed on there already and you can easily remove those as needed. If you need to bring your wire rope through but maybe it has a loop on the end or some type of device where the cable secure that won't allow it to go through the roller, all you got to do is remove this at a hardware that attached to that roller on, bring your cable through and then reinstall the roller over your cable. That's going to do it for our review of part number BDW20059 this is the bulldog winch roller fairlead for Powersport Applications. .
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rex M.
1/26/2018
Still going strong