Your propane cylinder and regulator need a hose between them. This 24" high-pressure pigtail connects a POL cylinder valve to a regulator with a 1/4" female IF inlet, supplying propane to your RV system.
When your RV has a POL propane cylinder and a regulator with a 1/4" female IF inlet, the fittings on both ends of the pigtail have to match. This 24" thermoplastic hose uses a wrench-tightened male hard nose POL fitting at the cylinder and a 1/4" male IF at the regulator to connect the two.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer. Let's take a look at this MEC Propane Pigtail Hose, 24 inches long. So, folks, when it's time to replace that high pressure hose, usually between the propane cylinder and your RV regulator, because the regulator is what's gonna regulate that pressure down to the usable pressure, one of the most important things to check is the connection on both fittings. With this pigtail, you have a POL fitting on one side and a quarter inch male flared fitting on the other side. So start on the propane side, you'll have a male hard nose POL fitting that's gonna twist with a 7/8 inch nut into that POL on the threads of that connection on the cylinder itself. And unlike a high end tightened type one fitting, you don't have to use a wrench to securely tighten this connection.
As you can see on the screen, we also carry leak detection fluid, sold separately. I highly recommend you pick up the bottle of that. It's very important that you're checking for leaks anytime you disconnect propane and reconnect it, make sure you're checking for bubbles and stuff and that everything is safe to go. Now on the other end of this hose, you're gonna have that male inch or that quarter inch male rather inverted flare, and that's gonna connect to a compatible quarter inch female inverted flare inlet on your propane regulator. So, again, before you order, make sure the length is correct, make sure the fittings match and those kind of things.
This is 24 inches long, it's a thermoplastic hose. It's been crimped on both ends with brass ferrules, so it's super strong, it's super rated for the high pressure, 350 PSI, and it's UL and CGA approved for propane use as well. So, again, folks, we do carry these in multiple lengths. Make sure you check them out, if you need something a little longer, a little shorter maybe, we've got you covered. I'm Steve with etrailer, thanks for watching.
.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.