Product Experts Available Now!
Call 1-800-940-8924
Replacement Hitch Ball for Curt Pintle Hook Combo - 2" Diameter - 10,000 lbs - Chrome
(55 reviews)
Price: $30.92
In Stock
CURT
Replacement Hitch Ball for Curt Pintle Hook Combo - 2" Diameter - 10,000 lbs - Chrome
Part Number: C48820
In Stock
$30.92
Retail:$46.84
You Save: 34%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (55)
- Q & A (0)
- Videos (1)
- Photos
CURT Trailer Hitch Ball - C48820
- Pintle Hitch Ball
- 2 Inch Diameter Ball
- 1-1/4 Inch Diameter Shank
- Chrome
- CURT
This 2" hitch ball acts as a direct replacement for the ball that comes standard with Curt pintle hook and hitch ball combo C48007. Can also be used with Curt pintle hook and hitch ball combo C48006. Chrome plating resists corrosion.
Features:
- Hitch ball works with Curt pintle hook combos (sold separately)
- Acts as direct replacement for ball that comes standard with C48007
- Can be added to C48006 to supply a 2" ball
- Provides the attachment point for a standard hitch ball coupler
- Drop-forged steel construction
- Rust-resistant, chrome-plated finish
- Nylon-insert locknut included
Specs:
- Weight capacity: 10,000 lbs
- Ball diameter: 2"
- Shank diameter: 1-1/4"
48820 Curt Replacement 2-Inch Hitch Ball for Receiver Mount Ball and Pintle Combination
Video of Replacement Hitch Ball for Curt Pintle Hook Combo - 2" Diameter - 10,000 lbs - Chrome
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of the Replacement Hitch Ball for Curt Pintle Hook Combo
Today we're going to take a look at the Curt 2 inch replacement hitch ball for the Curt pin to hook combos. Has a 10,000 pound weight capacity. Now, this hitch ball will work with the Curt pin to hook combos that we do sell separately on our website. It provides the attachment point for a standard hitch ball coupler. Now, this part will act as a direct replacement for the ball that comes standard on the pin to hook combo. Part number C48007 and this part can be added to the pin to hook combo part number C48006 to supply as 2 inch diameter size ball.
This is a drop Ford steel construction. If you notice it has a nice rust resistant chrome plated finish and the nylon insert lock nut, which is on the bottom here. That is included to install it onto that combo. A few specs on this. The weight capacity again, which is stamped on the top, is 10,000 pounds. The ball diameter, 2 inches.
The shank diameter is 1 1/4 inches. That should do it for the review on the Curt 2 inch replacement hitch ball for Curt pin to hook combos. With a 10,000 pound weight capacity.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Ratings & Reviews
4.7
55 reviews
by:
Edward
09/21/2023
It’s a hitch ball. It does the job. I’ve never noticed if the chrome came off after Jack was done with it.
by:
Joel
04/29/2018
Bought the wrong part and didn't know until it was too late to return. GREAT customer service. It's as if they actually care about their customers! What a concept.
by:
Luther
09/26/2023
Fast shipping. Had it installed, works great.
by:
Ivan
04/29/2020
It will be until school ends before I get a chance to use this but looks to be well built. I like the options and versatility of the pintle combo.
by:
Ryan
05/10/2020
Solid products, just like all Curt products. Fits just like it should, and does it’s job just like it should.
by:
Dana
10/09/2025
Wrong size shank diameter was sent and didn’t work with Reese WDH that was recommended to me.
by:
Gino
10/15/2022
Fast shipping
by:
David K
01/28/2020
Excellent product and service and prices.
by:
Todd
03/27/2019
Haven’t installed the items yet but they arrived sooner than anticipated and seem to be good quality. I can only assume they’ll do the trick.
by:
Mark
09/08/2022
Worked perfect and well made!
by:
Robbie
08/25/2023
Fits in the pintle perfectly
by:
bradbo
08/13/2015
they are balls what can you say lets see how long the chrome lasts.
by:
Tim
03/13/2018
Very well made.
by:
Justin
03/17/2017
See photo
by:
Larry
01/08/2020
Everything went well fast delivery
by:
L
03/13/2026
by:
Buster
10/11/2021
by:
James
08/09/2023
by:
Ed
05/03/2024
by:
John
10/28/2024
by:
John
11/22/2023
by:
Micheal
01/28/2023
by:
William
08/01/2021
by:
Harry
01/09/2025
by:
Tim
11/05/2020
25
55
true
Show More Reviews
See what our Experts say about this CURT Trailer Hitch Ball
- Is there a Convert a Ball Hitch with Pintle Hook and 2 inch ball Capabilities Available?I checked with Curt who confirmed you can replace the 2 5/16 inch ball with a 2 inch ball # C48820 as needed with the Curt Pintle Hook with 2-5/16" Ball - 2-1/2" Hitches - 20,000 lbs # C45908. If you prefer the Convert-A-Ball option like you mentioned, the Pintle Hook Combo with 3 Stainless Steel Balls - Bolt On - 25,000 lbs Item # PH1 is my recommendation. The hitch comes with 3 ball sizes: 1-7/8", 2" and 2-5/16" and has a towing capacity for 2" and 2-5/16" hitch balls between 3,500-10,000...
view full answer... - Can I Add a 2" Hitch Ball to the Curt Pintle Hook w/ a 2-5/16" Ball C45910-15-20?Yes, it can! To add a 2" hitch ball to the Curt Pintle Hook with 2-5/16" Ball item # C45910-15-20 you'll need the Replacement Hitch Ball for Curt Pintle Hook Combo item # C48820. This is the only way to add a 2" hitch ball you can't buy one with it. If you are wanting an 2" hitch ball on a adjustable ball mount with a pintle hook you'll need the B&W Tow & Stow Pintle Hook item # BWTS10055.
view full answer... - What Size Wrench Do I Need for the Replacement Hitch Ball for Curt Pintle Hook Combo?You'll need a 1-7/8" wrench to tighten the nut on the Replacement Hitch Ball for Curt Pintle Hook Combo item # C48820.
view full answer... - Difference Between The Curt 45920 And 45922 Channel Mount Htich BallAlong with # C45922 having the ability to tow more than 7,000 lbs more than # C45920, the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922 can also be changed to use a 1-7/8" ball # C48810 and a 2" ball # C48820. The Curt # C45922 also has a built in anti-rattle design that helps reduce towing noise, and can fit lunette ring couplers with a diameter of 2-12" or 3".
view full answer... - Can Different Sized Hitch Balls be Used with Curt Pintle Hook # C45908Yes, the 2-5/16 inch hitch ball that comes included with the Curt Pintle Hook # C45908 can be swapped out with a different sized ball that features a compatible shank. For a 2 inch hitch ball to use with this assembly the Curt # C48820 will work perfectly. We also have the 1-7/8 inch # C48810 if you think you would ever have a need for a smaller hitch ball. I have attached a short video demonstration on the Pintle Hook that you can also take a look at.
view full answer... - Replacement Channel Mount Ball Platform for 20K 3 Inch Wide Adjustable Curt ShankThe internal channel width of the Replacement Shank for Curt Adjustable 2-Ball Mount # C45917 is 3" while the Replacement Ball Platform # C28KR you're looking at has a 2-3/4" width and is for the Curt Rebellion XD rated only for 15K as opposed to the 20K rating for your shank. Since there will be a 1/4" difference I recommend going with the Curt Pintle Hook # C45922 instead which has the higher rating to match your shank plus it comes with a 2-5/16" hitch ball that can be swapped out for...
view full answer... - Can a 2 Inch Ball be Installed on Pintle Hook Combo # C48200You could put a 2 inch ball in place of the 2-5/16 inch ball on Pintle Hook Combo # C48200. You could use part # C48820. This will drop your towing capacity from 16,000 pounds using the the 2-5/16 inch ball to 10,000 pounds using the replacement 2 inch ball. You will still have the 16,000 pound capacity using the lunette ring set-up.
view full answer... - Mounting Torque For Curt Pintle Hook # C48200When it comes to the recommend torque specs for the four bolts on The Curt Pintle Hook with 2-5/16 inch Hitch Ball # C48200 per Curt you will need to tighten all the bolts to 90 ft. lbs. The pintle hook has a bolt-on installation to Pintle Hook Mounting Plate # C48343. The pintle hook has interchangeable hitch hitch balls that will let you easily swap for a 1-7/8 inch hitch ball # C48810 or a 2 inch ball # C48820 (both sold separately). The item has a strong forged steel construction...
view full answer... - 2 inch Hitch Ball that Fits Curt Pintle Ball/Hook Combo part # C48006The Curt Pintle Ball/Hook Combo part # C48006 that you referenced comes with a 2-5/16 inch ball but if you wanted to swap in a 2 inch ball you'd want the part # C48820 which has a 1-1/4 inch diameter shank
view full answer... - Replacement Hitch Ball for Curt Pintle Hook Combo Dimensions I went down to our warehouse and measured the Replacement Hitch Ball for Curt Pintle Hook Combo # C48820. The height of the ball inside the pintle is 2-1/2 inches (see picture). The overall height of the hitch ball is 5 inches.
view full answer...
- Which Hitch Balls Fit the Curt Pintle Hook Part # C48200The Curt Pintle Hook, part # C48200, includes a 2-5/16 inch hitch ball. For other sizes use part # C48820 for a 2 inch or part # C48810. Both have a 1-1/4 inch shank.
view full answer... - 2 inch Ball Replacement for the Curt Combo Pintle Hook # C48006Yes, if you wanted to change the hitch ball of the # C48006 to a 2 inch ball you would need to unscrew the nut on the bottom of the ball mount and then install the 2 inch hitch ball # C48820.
view full answer... - Can the Ball of the Curt Pintle Hook with 2-5/16" Ball #C48012 Have a 2 inch Ball Swapped OutYes, if you wanted to change the hitch ball of the # C48012 to a 2 inch ball you would need to unscrew the nut on the bottom of the ball mount and then install the 2 inch hitch ball # C48820. They both do share the same 1-1/4 inch shank diameter.
view full answer... - Availability of Pintle Hook Combo Ball Mount with 2 inch BallFor a version of the Curt Pintle Hook Combo part # C48006 that comes with a 2 inch ball you would want the part # C48007 instead. I attached a review video for this product for you to check out as well. Or you could replace the ball of the # C48006 with a # C48820.
view full answer... - Can Curt Pintle Hook with 2-5/16 Inch Hitch Ball # C48200 Be Used with 2 Inch BallThe Curt Pintle Hook # C48200 referenced in your question includes a 2-5/16 inch ball that can absolutely be swapped out for a 2 inch ball like # C48820. This pintle hook and ball combo features a 16,000 pound towing capacity, a strong forged steel construction and a rust-resistant finish. It will bolt on to a pintle hook mounting plate like # C48343 for 2 inch hitch receivers. I have attached a short video demonstration on this product that you can also check out.
view full answer... - Shank Size Of Hitch Ball Included With The Curt Pintle Hook W/ 2-5/16" Hitch Ball C48200The Curt Pintle Hook with 2-5/16" Hitch Ball - Bolt On - 16,000 lbs # C48200 you were looking at has a ball hole that is 1-1/4" in diameter. This combo includes a 2-5/16" hitch ball already, so for a 2" hitch ball I recommend the Replacement Hitch Ball for Curt Pintle Hook Combo - 2" Diameter - 10,000 lbs - Chrome # C48820 which was made for this hitch. I included videos of the products mentioned for you to take a look at.
view full answer... - Pintle Hitch Adapter For The Curt Adjustable 2-Ball Mount # C45902Hi Andrew, Based on what you're describing it sounds like you have the Curt Adjustable 2-Ball Mount # C45902, which is compatible with the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922. This is also rated for 20,000lbs and the 2-5/16" hitch ball can be swapped out with a 1-7/8" # C48810 or 2" # C48820 hitch ball if needed.
view full answer... - Recommended Weight Distribution Hitch For a 20' Camper With 2" Hitch Ball CouplerI recommend using a Equal-i-zer Weight Distribution System for your 20' camper. You will need to verify the correct hitch system depending on how much the camper weighs. I prefer the Equal-i-zer as it incorporates sway control into the hitch, it is made in the USA and in my opinion is the best bang for the buck for weight distribution. 200-600lbs Tongue Weight, Trailer Up to 6,000lbs # EQ37060ET 600-1,000lbs Tongue Weight, Trailer Up to 10,000lbs # EQ37100ET The 6,000LB # EQ37060ET comes...
view full answer... - Best Way To Add A 2" Hitch Ball To The Curt Pintle Hook C45908Hey Gary, thanks for reaching out. No, it won't, but I do have a solution for you. The Curt Pintle Hook # C45908 has a 3" wide channel, and the Replacement Ball Platform # C28KR is 2-3/4" wide. So, I can't recommend using those two together. What you can do instead is simply swap out the 2-5/16" ball on the # C45908 pintle hook for a 2" ball. For that you can use the following: - Replacement Hitch Ball for Curt Pintle Hook Combo - 2" Diameter - 10,000 lbs - Chrome # C48820 What kind...
view full answer...
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
10/9/2025
The Reese Steadi-Flex takes a ball with a 1-inch shank, instead of a 1-1/4 inch shank which is typical. I'll have one of our Customer Service folks reach out to you.